Question about own WXP installation and activation key code

Similar Questions

• Question about Windows Media Center and activation

  I have a desktop computer with the Windows 8 operating system I received via the Dreamspark program.

  After the operating system installation, I also used the product key free, that I had to install the Pack in Media Center.

  A month later, after the upgrade to Windows 8.1, navigation through settings window, I can see that the windows are not enabled.

  I tried to re - enter the product key Media Center Pack, which was not accepted this time because the computer reports that this key is used on a different computer, which is not true.

  I don't see classic popups on the activation of windows and there is "no x days left to activate" notification but the watermark report the number of build on the corner of my screen is visible.

  How can I solve this problem?

  Thank you in advance.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Question about the memory consumed and active

  I have esx4.1 on three dl585 running. I have about 100 active vm running, and I have a small question.

  My vm is all 2008 r2 datacenter and I gave them 1 cpu and 4 GB of ram. When I recover a single virtual machine and look at the summary page, I see the bones of memory consumed host 4075 mb and the active guest memory 81 MB operating system. My question is can I reduce the host cunsumed memory to 2 GB without noticing a difference within the virtual machine?

  It looks like you can.   To be absolutely sure that you'd need monitor assets long enough to have a good idea of what the average is and what are the tops.

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• FSX doe to not work after installation and activation on xp 64

  • problems with fsx deluxe
  • Windows xp prof 64 bit
  • tried to reinstall software
  • When you click on the shortcut on the office splash screen appears the landscape of loads of objects then disappears
  • did have problems in first installation with activation key after 2nd install called from new activation, installed and active fsx ok code but does not start a short cut
  • should I try a disc format hard costs re - install of xp64 and fsx installation costs

  Hello

  Have you installed any 3^rd party application (aircraft) and/or you are running one of the game Add-ons.

  You can also check if DirectX update allows you to play the game.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  Also make sure that all drivers are updated to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation and activation of google chrome, I lost my taskbar

  Original title: Google Chrome

  during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?

  Hi Frank,.

  1. do you receive any error messages?

  2. have you restarted the computer once installed google chrome?

  3. not this problem occurs when you run a specific program or out of order?

  This problem can occur for the following reasons:

  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.

  Method 1: Make sure that the hide option automatically is not selected for the taskbar

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  If the problem persists, you can proceed to method 2.

  2 method: Recycle Explorer.exe

  Try to recycle Explorer.exe by opening the Task Manager (you can use Ctrl + Shift + Esc), selecting explorer.exe in the list and choosing end process.

  Now go to the file menu, choose new task and type in Explorer in the Open box. Press on enter and explore should restart itself.

  Check whether the taskbar is visible now.

  Hope this information helps. Provide more information so that we can help you.

• What is the serial key and activation key for Microsoft professional win7 64 bit?

  Original title: WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT.

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  You will need to buy a license to activate this copy of Windows 7 Professional. It doesn't have a product key, you will need to have that already.

  You can even buy an edition much cheaper if you like Home Premium, since it will be for domestic use.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• A few general questions about records OS, ID and keys

  Discs, ID and keys

  A few questions:

  Are all the same windows installation disks?
  When I say the same thing, I mean if they are the same product, i'e two disks with Vista Basic on
  Is the product id part of them somehow?
  What's this number on the disc? or do I have reason to think that it is created by the installation and hardware on your laptop / pc
  You can use the same disc windows genuine to install the same copy of windows on two laptops, but by using laptops to separate the key product authentic?
  If someone could answer these for me I would be very grateful
  Jim

  Hello

  manufacturer's recovery disks are specific to the make and model

  You cannot use a Dell disk on an HP machine

  ____________________________________________________

  BUT, if you have a DVD of Microsoft Vista, it does not matter whether a Microsoft Retail or OEM Microsoft license disk (and I don't speak of HP OEM here, but more particularly Microsoft OEM), read this:

  Microsoft Vista DVD contains all versions of vista

  Make sure that you borrow / use the correct 32-bit or 64-bit microsoft dvd to your computer because there are 2 Vista DVD

  and this is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  That's why they are purposes of resettlement used if you cannot acquire the recovery for a particular reason manufactrers discs

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Installed new HARD drive and activation key has expired

  I have Windows 7 Ultimate on my laptop and my HARD drive just died. I bought a new one and I used a program called Ez Gig to clone my old HDD to my new HARD drive, before it died completely. Now, I get a message "this is not a genuine copy of Windows. He sends me to a Web Macintoshëoperating site and it runs a check and then tells me that my activation key has expired, and the Microsoft Web site wants me to buy another copy! Why is he doing this and how to fix it? Thank you

  Michael

  Your Windows license is related to your hardware. Since you just cloned the BONE but has changed the hardware, the Windows Activation does not recognize your new system. Thus, the solution would be just to reactivate your Windows.

  The phone activation does not just work. You will need to re-enter your product key.

  Click Start, right-click on computer , and select Properties.

  On the Windows Activation section, click on change product key and enter your key.

  If you are using a retail version of Windows, then the key must be with the disk when you buy it.

  If Windows is preinstalled on the laptop, the key lies in a sticker at the bottom of your laptop.

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and my key code?

  Leave my Pro XI of Adobe Acrobat, reading documents and does not load my original CD.  Where can I download the program from the internet and use my original key Code?

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html