question about ownership of Val (Sgnl)

Hello

I read data from a connection telnet as a 16-bit binary values.  I strip the individual bits of that word of 16 bits in the light of the indicators.  For each indicator is turned on, I want to have a 'historic' associated indicator, which shows if it lights up, then went dark at some point (as a test).

To do this, when I assign a value to a given indicator, I send this same value Val (women) of the indicator property.  Then I have a structure of the event which simply defines the true 'history indicator' whenever there is a change of value in the Val field (Windows).

OK so my problem is that I can't be understand what constitutes a change in the value, because that what is happening, is that when there is an error on any indicator, ALL history indicators are lighting up.  The VI is vast and complex, to remedy that I've attached a picture that shows the important parts.  Notice on the left I have hide individual bits, and then on the right, is when I turn on the indicator based on the property Value Change.  I only mentioned here because they are discreet, but the code is identical... If the respective error bit changes value (low to high or high to low), then the light of history.

So for example... If G_LOL somm goes active, the bits of history for all 5 indicators goes active.

I put sensors on the signals I don't expect to light (e.g. probe #18 at the bottom of the picture to the left)... remains 'false' all the time (i.e. the value doesn't change), but it is seeing history turns.

Any thoughts?  Thank you


Tags: NI Software

Similar Questions

  • Question about example of Menus contextual Run-Time

    I'm looking at Menus.vi comes with LabVIEW2011 shortened execution. There is one event for the "Test list": the mouse down, which does nothing, but generate an event of Val (Sgnl) for control of the "test list" If the right mouse button has been pressed. There is no case change value for this control.

    Is there some reason to do so? One thing I've learned about many examples is not be used strictly as examples.

    Nevermind - I found the reason. Although it is not a value change event, generating the value change event is required to change the value on the right click.

    At least NEITHER could have documented it in the example

  • Questions about the terms and conditions

    Dear team of Adobe Stock,

    I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

    3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

    What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

    Thank you

    Hello

    Please see the link below for help:

    http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

  • A question about the license of Oracle 1 g R2 Enterprise Edition

    Hi all


    I have a question about Oracle license and I would be grateful if you could help me thanks.

    I installed an Oracle (11g R2 Enterprise edition) server on a virtual linux machine. The pc being used for this purpose
    is my cell phone company (so a professional and not a personal computer). However, I use this Oracle Server
    only for the purpose, i.e. learning only to run the examples in my Oracle Press books (SQL, PL/SQL and some)
    administrative tasks) just to learn things.

    There is absolutely no data related to my business, stored or used on this server. Whenever I want to work with my
    data of the company, I use the Oracle server of the company that has the appropriate license of course. So, as I said, I
    Use this server of the company on the virtual machine only to run applications/programs in my Oracle Press books just for
    learning and I'm the only person who uses this server (no remote for other users).

    The reason why I needed to install this server on my PC, is that our DBA could not provide a training environment
    for me, with all the privileges and features.


    Should I buy a license for this Enterprise Server installed on my virtual machine?


    Thanks in advance,
    Dariyoosh

    The OTN license agreement:

    >
    LICENSE RIGHTS
    We grant an exclusive, non-transferable, limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application and not for other purposes. If you use the application you develop in this licence for any internal or for any commercial or purposes data processing production, or you want to use the programs for purposes other that those permitted under this agreement, you must get a production version of the program by contacting us or a reseller of Oracle to obtain the appropriate license. You acknowledge that we may not produce a production version of the programme and the development efforts undertaken by you at your own risk. We can check your use of the programs. Program documentation, if any, may be consulted online at http://otn.oracle.com/docs.

    Ownership and Restrictions all retain us the property and rights of intellectual property in the programs. Programs can be installed on a single computer only and worn by one person in the operating environment identified by us. You can make a copy of the program for backup purposes.

    You can not:
    -Use programs for your own internal data processing or for commercial or production purposes, or programs for any purpose except the development of your application.
    -use the applications you develop with programs for any internal data processing or commercial or production without obtaining an adequate license from us;
    -continue to develop your application after using for any treatment data internal, commercial or production end without obtaining an adequate license from us, or Oracle reseller;
    -remove or change any brand of program or a statement of property rights;
    -put the programs available in any manner to a third party;
    -Use programs to provide a third of training;
    -assign this contract or give or transfer the programs or interest to them to another person or entity; -cause or permit engineering reverse (unless required by law for interoperability), disassembly or decompilation of the programs;
    -disclose the results of benchmark tests of any program without our prior written consent.

  • Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

    I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

    https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

    There is another option.

  • About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    Hi Michael,

    If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

    One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

    Content

    To manage this content, you are currently subscribed and changing your preferences, select the content.

    Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

    You can select to terminate a subscription to a thread.

    Learn how to manage your subscriptions

    Take care.

  • Where and how do I ask questions about Email?

    The Commission opening thingy is complicated, I have trouble finding my way around it.  I don't know where or how questions about email.  Is there an easier way than trawling through all these icons?  Like a list or something - as you get on all other forums on the internet?

    It would be a good starting point: Mac mini

    Or the appropriate under MAC Os and system software section.

    You might also find this useful: find answers and new questions

  • Many questions about the HP 50 g

    I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

    Thanks for your help,

    Zekelegge

    Hi!, zekelegge:

    Welcome to Forum!

    The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

    The printer... HP 82240 B

    The cable series...

    The description... http://www.allenwan.com/hpcalcserialcable/

    The original cable...

  • Question about warranty after exchanges of RAM on Satellite module series

    Hello together,

    I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
    Thanks in advance for your answers.

    Concerning

    TiG3r

    For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

    If Toshiba offers something like this he won't have the negative influence of valid warranty.
    Buy a compatible module and RAM upgrade.

    Bye and good luck!

  • A few quick questions about the Satellite P300 - 18 M

    Hello

    I am about to order a Satellite P300 - 18 M and have just a few questions about this:

    (Although these may apply for other similar Satellite/Equium P300.)

    Is the touchpad made by / to use the Alps or Synaptics driver?

    It has the Wireless N network card, is the map made by Intel or Realtec?

    And also, someone has experience with face recognition software to connect?

    If so, does it take a lot of time to initalise?

    Thanks in advance,
    Jack

    Hello

    The P300 - 18M belongs to the PSPCCE series.
    It uses the two touchpad drivers. Synaptics & Alps Electric
    There is an Intel 802.11agn minicards WLan installed

    The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

    But if you face is recognized correctly that the connection should work properly

    See you soon

  • Questions about nb200

    I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

    You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

  • A few questions about the difference between the Satellite P70, L70, S70

    Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

    (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

    (3) all the three (P70, L70, S70 series) come with the same TFT panels?

    (4) of the above series, which supports mSata?

    (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

    (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

    (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

    Thank you in advance.

    > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

    (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
    As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

    I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

    (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
    See point 1). Different P70, L70, S70 models were equipped with different material parts.

    (> 4) of the series above, which takes in charge mSata?
    As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

    (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
    See point 4) not all models supports the same hardware specifications

    (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
    I don t think that SATA III is supported. I guess it would be SATA II

    (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
    Not easy to answer because there are too many models released in Europea.
    And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

  • Satellite L650-11R - a few questions about this

    Hello there :-)

    I have a few questions about my new L650.

    I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

    1)
    First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
    The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

    2)
    The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
    However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
    During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

    GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

    These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

    3)
    This is just General related products. :-)
    Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

    Sorry for the long post, I tried to include the best possible description that I could do. :-)

    Thank you in advance.

    Thanks for the additional info!

  • Hi there, I have a question about storage, even if I have 2, 53GB, storage watch 21, 99GB usage, why this difference? I use an iMac 2009, thank you!

    Hi there, I have a question about storage, even if I have 2, 53GB, storage watch 21, 99GB usage, why this difference? I use an iMac 2009, thank you!

    Spotlight re-indexing.

  • A few questions about the upgrade on Satellite A300-144

    Sorry for the typos, English is not my mother tongue.
    I want to ask some questions about the upgrade of a300-144.

    * Some info first.*

    CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
    Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

    * Questions.*

    1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

    3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

    > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
    If the FSB would allow support 667 MHz then the memory would also at this speed.

    > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
    The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

    > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

    It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
    But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

Maybe you are looking for