Question about PERC H330 write speed:

Similar Questions

• Questions about Wi - Fi connection speeds

  I want to my wi - fi connection speed for my wireless devices. I use an Airport Extreme 4th gen, with an Apple Express 2nd generation. All devices are 802.11n, but iPhones have ac 802.11. I have an Apple TV and a Yamaha AV receiver as well using a Wi - fi connection and doing very well. My Internet speed to my iMac (cable) is constantly 88 MB/s. But two rooms, the living room, my devices see speeds Internet 12-15 Mbps. Two walls and 25 feet between the two.

  A new 6th gen AE would give me better speeds of Wi - fi? Alternatively, would be faster Internet? I pay for 75 Mbps. I realize to reposition my router AE could help, especially to move it to another room, but I like the speed of a wired connection to my iMac, which I use for work. If I got a new AE, I would probably opt for a time Capsure, but I think I read somewhere that he does not like working on 802.11n. My wife has a MacBook Air using the Apple Express... and she obviously would like to back up on a TC instead of his external hard drive attached to the MB.

  A new 6th gen AE would give me better speeds of Wi - fi?

  Yes and no.

  Yes, if you ask on the speed of connection Wi - Fi between devices on your ' LAN '. Given that iPhones are capable of 802.11ac, they would connect to faster speeds if they are in close proximity to the extreme AriPort.  Other 802.11n devices will connect to the same speed as they do now.

  No, if you ask if your connection Internet Wi - Fi speed will improve, since the speed of your Internet connection is controlled by your provider of Internet Service (ISP).  If you want faster Internet connection speeds, you need to talk to your ISP a faster Internet connection package.

  The trick to good Wi - Fi connection speeds in your network is to have Wi - Fi devices in the same room, or line-of-sight with the wireless router. On average, even a normal wall in a House will slow down the speed of 20 to 25%, so if the signal must pass through several obstacles, the speed of the signal drops dramatically.

  Sometimes, the only way to maintain good speeds is to add another AirPort router in another area where you need faster speeds and connect airports together using a wired Ethernet connection.  In the largest House, it is not uncommon to see four or five airports used to get good coverage throughout the House.

  My House is not big, about 2200 square feet, and it takes three airports to cover the good, fast throughout the House.

  I would probably opt for a time Capsure, but I think I read somewhere that he does not like working on 802.11n.

  As you know, a Capsule is an AirPort Extreme with a built-in hard drive. Otherwise, there is no difference between a Time Capsule 802.11ac and an AirPort Extreme 802.11 ac.

  I'm not aware of any report or other documentation that would indicate that the products do not like working on 802.11n. I have an AirPort Extreme and Time Capsule, and both do just fine with "ac" and "n" devices.

• Questions about PersistentStore/PersistentObject

  Hi all!

  This is my first post and also a newbie on blackberry development.

  Before I start to develop one, I first some ideas on PersistentStorage.

  My questions are the following:

  1. What is the maximum size of the PersistentStore?

  2. what the read/write speed? I ask this question because I need to store data about 200 k.

  . One of my colleagues use before RMS but he can't handle the kind of data that we have to handle.

  Example, it takes 20 seconds to write 50 K with RMS data.

  If it is a byte array, then you don't need to do any conversions to store in RMS.  That said, I see no reason, except compatible with J2ME devices, than you would.  So I recommend you Persistentstore.

  About your second question, I'm not sure that understand how you would sort an array of bytes.

  In addition, these two are the mechanisms of persistence, rather than data management mechanisms.  If RMS or Persistentstore will directly help you with this sort of thing, but given that Persistentstore can be used to store objects, not just bytes, you will probably find it much easier to work with.

  If you plan to do the filtering, searching, sorting etc then you should look at SQLite.

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• A6000 SD card write speed?

  What is the write speed maximum of internal A6000s... one of my friends offered to buy my current card at almost full prices. But there is no reason to upgrade if im already at maximum speed cameras (an example would be the Canon 5 d M3, which cannot write to SD card with about 45 MB/S)

  So, what is the write speed from MAX SDcard of the Sony (Ilçe-6000) a6000? is it not able to take advantage of a 280 MB/s of sandisk card?

  You can not buy a SD card that will not work in an A6000. If the card you get is capable of speeds of reading/writing that cannot the A6000, the A6000 can still use the card, and your next camera may be able to take advantage of the extra speed.

  In other words, which are always slower, either the camera or the card, which will be the limiting factor, which is ok, and if the card can run faster than the camera can manage, they still work together. And if the device can run faster than the card, the camera will slow down until no matter what the speed, the card can handle.

  Then buy the fastest card you can get and if your A6000 cannot take advantage of the extra speed, he can still use it, and maybe your A6000M2 will be able to use the extra speed.

• Satellite U405D - several questions about overheating/disassembly/upgrading etc.

  Hello

  I have several questions about my old one by Satellite U405D-S2910

  1. when it works, after 2-3 hours (I run usually small programs such as safari, msn messenger and bsplayer) CPU gets 85 to 90 C (178-188). When I play age of Empires 2 (come on, its an old game) like 2-3 hours, it stops. What could be the possible reason? Furthermore, let me inform you about the climate of the city I live, 30 c temperature - humidity 25-35% (today).
  PS. CPU is AMD Turion 64 X 2 Dual-Core Mobile Processor. Model RM-74

  2. I'm going to disassemble my laptop in order to clean its cooling units (I think at the rate of overheating is this). It does seem like a desktop computer, so complicated. Ive seen a disassembly not to not (btw, its so difficult to spell dismantling :) I think Im going to do this. What are your suggestions on this subject? experiences could help me?

  3. my laptops is Ram 2x2gb PC5300 DDR2 667 MHz SDRAM memory, I want to replace RAM memory 2x2gb MACH XTREME DDR2 1333 MHZ CL9 NOTEBOOK. Should I do it? Fit my portable, stable work? any suggestions?
  PS. motherboard chipset AMD M780V

  4 - Finally :), should I use OS 64 - bit or 32-bit OS (win7)? what OS would you use if you were me?

  Thank you.

  Hey Buddy,

  1 + 2. I think everything is related to a higher internal temperature and you must clean your laptop using a jet of compressed air. That is why it s not necessary to remove, just blow softly and soon the air through the laptop. You can buy such compressed air which squirts of each computer store I think and it takes only 5 minutes.
  You can find a useful article about this here:

  3. in my opinion he should forget this update! The speed of the RAM is related to the FSB of the CPU and as much as I know about Satellite U405D it s 667 MHz so it s already the RAM faster than you can have. Save your money and buy a larger HARD drive or in the best case a SSD that can really improve the performance!

  4. in my view, the answer is clear: Windows 7 64-bit.
  Only a 64-bit OS supports full 4 GB of RAM. ;)

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Question about local variable in LabVIEW

  I am a new bie to LabVIEW.

  I have a question about local variable in LabView.

  I tried to stop a loop by the local variable, but the value of the loop for counter is different with my hope.

  I think that the loop to stop at 6, but he stopped at 7.

  Could someone help me?

  This looks exactly like a race condition.  You have know control if the control terminal is first in reading or the local variable is written to the first.

  Try to run your code to highlight execution.

  In your code, what usually happens is that order is read and the value is false.  Then the other code will run allowing the value to write to the local variable.  Let's say that in a particular loop iteration, we get the True value.  But control of the final value has already been read as false, then the loop runs again.  The next iteration of the Terminal is read and then he sees the true, will force to stop no matter what happens in the rest of the loop the loop.

  So, why do you use a local variable instead of sending just the wire to the terminal stop?

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• INSPIRION 3543 - question about jack combo

  Hi, I have a question about a laptop Inspiron 3543. He installed the combo input jacks, and I need to use the line of input and output audio.

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  Sorry for the broken English, but I write with a translator: D

  dayer41

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Hello. Jack combo on the Inspiron 15 3543 is intended to be used with standard stereo headphones, or with headphones (stereo headset with a built-in mono microphone).

  In theory, a dispatcher or an adapter with a plug out of SOCKET (tip, ring, ring, sleeve) can be used with a combo Jack. A plug from SOCKET looks like this:

  

  However, we have received many messages from people saying that the adapter did not work for them. Some people have posted and said that the adapter works for them.

  Note that the entry of a combo Jack is mono. There is no way to make it be a stereo input.

  dayer41

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  You can set the input mic in sound properties volume (Control Panel > Sound). Open the properties of the sound, and then click the recording tab at the top. Right click on the Microphone. Click 'properties '. Click the tab at the top levels to find the sliders to adjust the volume of the mic input.

  It is similar to this image, except that you must click on 'Levels', not 'listen '.

  

• A few questions about FileConnection/JSR 75

  [I posted these issues some time ago, but got no response]

  I am writing an application that targets the 4.2.1 and upward. After reading everything I can find (api docs, forum, kb, guides, web search), I still have many questions about the BlackBerry file system:

  1. Are store / and SDCard / internal name of the memory and the SD card root on all BlackBerry devices?
  2. JSR 75 leaves open the question of whether an application sees the virtual roots that are private to itself or if all applications share the same roots. How does on BBs? I have seen many examples where the path name starts by "/ store/home/user/app_name /" or "/ SDCard/BlackBerry/app_name / '. Is this necessary, or can my request simply use "/ store /" or "/SDCard/" and add the file name? If the former, are there best practices documented anywhere to manage collisions between app names?
  3. If the files are visible in many applications, there are layers of security available to protect data (I think something similar to how a PersistentObject can be encapsulated in an object ControlledAccess using the PersistentStore) or do make us our own?
  4. I read on this forum somewhere that store / is not available when a device is connected via USB and mass storage is active. Is this and other information like this documented somewhere?
  5. May restrict the COMPUTER strategies how an application uses FileConnection, particularly to the store / and SDCard /? If so, is there any guidance on common restrictions that developers should know when you write applications for general use?
  6. What restrictions are there on the names of files (allowed characters, length, etc.)?

  Any guidance or pointers will be appreciated!

  Hi Ted,

  I'm not sure on your remaining questions, but I'll try to answer as best I can:

  1. did not have different names on the devices until today.

  2. you have no problem on SD card and you are allowed to save files anywhere it. Not quite sure

  shop around, but you should be able to save files on the file system visible and own created folders. There will be

  some folders inaccessible devices that require internal processing (installed Te of applications etc..).

  3. you can open files as readonly etc. but elsethere it is not the layers of security installed. If you have data

  issues of security, you must save this Te using the RuntimeStore class!

  4. I don't know, but it's a fact. But for this purpose, you can detect the toggling of mass storage

  programmatically.

  5 see point No. 3

  6 see restrictions as specified in JSR 75.

  Kind regards

  Jochen

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."