Question about phone and / or Android 1.5

I have a question or a statement that needs confirmation. If someone could be good enough to help out I'd appreciate it.

I am a heavy Texter and text on a daily basis, probably an average of about 250 + texts per day. Also, I noticed and I took County, after about 4 hours of texting the android keyboard and also the swype keyboard, affecting the time key to key response starts to slow down and get slow and ultimitely is unbearable to the text with. Even with the home screen and sliding screens from left to right, and as I said it doesn't happen only after some hours of use of the phone. So, I have to restart the phone and repeat for it keep to become lazy and unbearable to text with. I usually reset every morning or when I wake up. This is nothing compared to my sisters Mytouch, which is in fact older than my phone, it can affect his day at the time and not get done with the delayed touch response. I also noticed that his phone is running Android 1.6.

Now my concern is, if I'm the only one knows this or is it due to a defective phone. What is the Android obsolete 1.5 that many people are talking about who is performing on the phone in this way.

Basically, it's because of 3 things.

1. history - more history, more than it takes to load. (If you wipe all messages and try again, you'll see what I mean)

2 android 1.5 - don't know what the reason, but even on 1.6 devices SMS language delay is AVERAGE less.

3 Swype - if you have enabled, it tends trolling more than the default android.

It is not your phone, it's all phones Cliq/Cliq XT... 1.5 hate text messaging.

In addition, your phone will work more effectively without a task manager. They are nice to have if you need something CF or to extend the life of the battery (no), it actually takes your phone like some processes that would otherwise, and you also have the risk of frost on the phone all together because some group programs are essential and cause the home screen all recharged after their closure. I would like to refer to this site in order to better explain.

http://tiny.cc/00s5a

Tags: Motorola Phones

Similar Questions

  • About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    Hi Michael,

    If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

    One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

    Content

    To manage this content, you are currently subscribed and changing your preferences, select the content.

    Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

    You can select to terminate a subscription to a thread.

    Learn how to manage your subscriptions

    Take care.

  • Question about business and Service of Proxy

    Hi friends,
    I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

    If your question is only about the performance analysis,
    try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
    For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

    See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

  • Windows 7 starts questions about mac and office 2010 following an installation

    It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

    Hello

    Thanks for posting your query in Microsoft Community.

    Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

    http://www.Apple.com/support/Bootcamp/

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • Question about snapshots and virtual machines

    Hi all

    I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

    I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Thanks for your help.

    Hello.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

    That is right.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Exactly the same thing for the upgrades of the OS.

    Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

    Good luck!

  • Question about CR and LF

    Hey guys,.

    Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

    However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

    Thank you

    Hi dora,

    read the Help for the WriteText function.

    There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

  • BlackBerry 10 Question about email and android runtime

    Greetings,

    Just, I got my new Z10 and have a few questions.

    1. is it possible to email to send in plain text by default? I see that I can select email but don't want to accidentally send a html email or I will never hear the end of it.

    2. I was wondering if it is possible to disable the android runtime, and how do we know if an application in the BlackBerry world runs on it?

    Edit: going to throw one over there:

    3. I see I can transfer files via WiFi and SMB, since I have my device and the SD card, encrypted, if I transfer files (I use smbclient from samba) are my files encrypted on the fly?

    Thanks for any help,

    Brian

    Yes, Built for BlackBerry means it's a native app for BB. Here is some info:

    https://developer.BlackBerry.com/builtforblackberry/documentation/overview.html

    The runtime executes in its own shell protected so he can do no damage to the device, but if you don't use a lot of apps, it should not be a problem. Keep in mind that some apps don't come that android ports so you will be somewhat limited.

  • Questions about File.applicationStorageDirectory on Android

    Hi all

    If I use the following code in my application...

    var file:File = File.applicationStorageDirectory;

    file = file.resolvePath("foo");

    var path: String = file.nativePath;


    ... and my application ID is "my.app.id", I get the following value in my variable 'path ':

    / Data/Data/air. My.app.ID.Debug/My.app.ID.Debug/local store/foo

    Shortly after I get an ioError when trying to access this file.

    Here are my questions:

    1. is this really my directory path of storage app (in debug mode, of course)? I am wary of the repetition of "air.my.app.id.debug". Is this a bug?

    2 is it possible that I can watch my files on Android? Since in my AIR application? Creating an instance of the file, and then call its method of travel doesn't seem to work, it works but when I run the same application on my Windows laptop...  I would like to see for myself if such a directory exists.

    3. I have an Android app named "AndExplorer" that allows me to watch my Android file system. I look after I run my AIR application (and also, I think that, while I have always in progress and suspended at a breakpoint), and I'm not find this file. I find 'data' folder on my SD card, but it is empty. Anyone can shed light on what is happening here?

    Thanks in advance,

    Douglas

    Hi Douglas,.

    Here are answers to your questions:

    >> 1. This path is really my directory of storage app (in debug mode, of course)? I am wary of the repetition of "air.my.app.id.debug". Is this a bug?

    This is the correct path and id app only repeats, so nothing wrong here.

    >> 2.  Is it possible that I can watch my files on Android? Since in my AIR application? Creating an instance of the file, and then call its method of travel doesn't seem to work, it works but when I run the same application on my Windows laptop...  I would like to see for myself if such a directory exists.

    You will not be able to access the files in the applicationStorage directory by using browse (as /data/ directory is only accessible on rooted phones). However you can access files in this directory using the file/FileStream API, to read/write/change its content.

    >> 3. I have an Android app named "AndExplorer" that allows me to watch my Android file system. I look after I run my AIR application (and also, I think that, while I have always in progress and suspended at a breakpoint), and I'm not find this file. I find 'data' folder on my SD card, but it is empty. Anyone can shed light on what is happening here?

    The data on your SD card folder is different from the other (part of the applicationStorageDirectory path) /data/ folder.

    Go back to your original problem, to which exact statement you get an IOError (check stack of stack memory in debug version).

    Happens in the creation of the file, opening the file, or in the read/write stream using file stream?

    Concerning

    Syed

  • M30-832: Questions about memory and DVD player

    Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
    1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

    2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

    Thank you very much

    Hi Richard,

    From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

    You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

    Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

    You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

    HTH)

  • question about SQL and VMDK places

    Hello world. Im kinda new here so please be gentle

    I'm confused on the locations of the files for sql.

    At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

    My disks are as follows

    1 OPERATING SYSTEM

    2 DB

    3 newspapers

    They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

    It lies in a cluster HA/DRS and we use them both.

    The question boils down to performance.

    If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

    Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

    How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

    What do you do to get your SQL servers to run in vmware?

    Seems like a basic question.

    The answer seems easy. Separate disks so that they do not fight.

    'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

    Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

    Thank you all

    1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

    Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

    2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

    Yes, the virtual controller is correct.

    If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

    As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.

  • Adobe software, questions about upgrades and why creative suite 6 is not mentioned in my login?

    Hello

    1st question is why I can't find my creative suite 6 in the specifications of my account?

    2nd question, how can I upgrade my software, is it only possible by going cloud? or is it still possible the old way of mode as I'm used to go by downloading?

    concerning

    Philippe

    Hi Philippek,

    I'll try to answer your questions one by one:

    1: If you are not able to find your CS6 in your Adobe account, this means that you might not have saved it. In case you want to find your serial number, check this box. Quickly find your serial number

    2nd: CS6 is last & latest perpetual more offered by Adobe. Especially since you can choose our Creative Cloud products. To learn more about Creative Cloud, check this box. Software and services for creative professionals | Adobe Creative Cloud

    You can also view the available plans. Pricing and membership creative cloud plans | Adobe Creative Cloud

    Hope that answers your query.

    Concerning

    ~ David

  • Question about printing and resolution

    Hello

    I have a trial version of PE13 tries and tries to reconcile with printing and resolution.

    I also read this informative tutorial here:

    How Image resolution affects printing - Photoshop tutorial

    This is the image I want to print:

    PhotoshopQ.jpg

    In the above tutorial, the author states that when printing, resolution 300 is the best and not the 79.3 px/inch I. When I change this 79.3 to 300, the image of Marilyn becomes tiny, so my question is how can I have a picture that would fit perfectly on photo paper A4 with a white 1 "border around itself (which means that the size of the image would be 8" x 6 ") while maintaining a 300 resolution?

    I go about it the right way, am I not?

    Thank you very much.

    Steve

    While the recommended resolution to see images from a short distance is 300 dpi, the normal resolution for screens, which was 72 PPI doe not exceed 90 ppi, except for the new screens hidpi. Which explains the "extended" effect that you see when you look at the 100% view (an impression pixel corresponds to a pixel on the screen). The print size will be what you chose: 6 * 9 inches.

  • Question about ESXi and NFS

    Greetings!  I'm hoping to get feedback on the following possible scenerio.

    Computer 1:

    The computer that is running Windows Server 2008.  Large amount of storage available, via dedicated hardware raid or 'software' / raid ICH10.

    Computer 2:

    Computer running ESXi v4 (installed on the local hard drive).  Core2Quad w / 8 GB RAM.  Responsible for about 4-5 virtual machines.  Each virtual computer will be low IO load (DCs environment lab, MySQL server, web server).

    I have three questions:

    1. are there any problems with the use of the space on 1 computer through Windows 2008 NFS to host virtual machines that will run on computer 2.

    2. because I do not use hardware RAID on computer 2, I won't RAID1 for redundancy.  If the hard drive fails, but virtual machines are on a redundant protected NFS share on Computer1, is there loss of data outside the need to reinstall ESXi on a new hard drive?

    3. someone can tell the performance of a 'software' RAID (probably RAID5) NFS share (ICH10, etc.) from the point of view of virtual machines hosting?

    Thanks in advance!

    1. are there any problems with the use of the space on 1 computer through Windows 2008 NFS to host virtual machines that will run on computer 2.

    Although the NFS Windows service is not the most ideal, it will work fine. You want to make sure there is no automated etc. updates and limited storage functions of the machine.

    2. because I do not use hardware RAID on computer 2, I won't RAID1 for redundancy.  If the hard drive fails, but virtual machines are on a redundant protected NFS share on Computer1, is there loss of data outside the need to reinstall ESXi on a new hard drive?

    It would not be otherwise than a hardware failure on any machine. You don't have the risk of data damage whether physical or virtual.

    3. someone can tell the performance of a 'software' RAID (probably RAID5) NFS share (ICH10, etc.) from the point of view of virtual machines hosting?

    Without hardware raid with a caching controller you won't have better disk performance. Controllers setting cached on RAM and will require a battery to protect the cache failure.

  • Question about native and web-visible content

    Hi all, I am working on an implementation of the ODC/ODDC and AAU, but my question is about native files and web files on the content server. When I send batches analysed using my profile of validation of the ODC to the AAU, the file is automatically converted to pdf format, the content is checked and then this file is copied from the safe to weblayout file folder.

    Is this really necessary? I m request this because if my file size is 1 MB instead of use only 1 MB ucm uses 2 MB for the same content. The original file and the web image file is the same PDF file.

    Is it possible to disable the web visible version just for the PDF files?

    Thanks in advance.

    Hello

    Yes, you can use file store provider and assign webless storage. With this, you can set up a rule and say what pdf archived (using the rule of form of consignment) such as the pdf files is sent to the PSA which does not store / create weblayout files.

    Thank you
    Srinath

  • Question about NetConnection and RTMP / RTMPT connectionsWWell

    Well Hello FMS forums out there again!

    My problem:

    I am building a video chat application and I have a friend behind a firewall which does not connect when you use the RTMP protocol, but if I change the url of net connection to use the RTMPT protocol it is able to connect.

    The question:

    Flashes automatically switch to RTMPT if it cannot establish a connection over a regular RTMP connection?  Or will it arrive at a way to do it myself?

    I am working under the assumption that the Flash first tries RTMP and if that connect not he try RTMPT... but then again, who does not connect to my friend unless I put it specifically as a url.

    Thanks again!

    I don't think so it's all about bandwidth. I have been really update to my previous post, but somehow it does not updated.

    You can also see this post: http://forums.adobe.com/thread/633753?tstart=30 - could also be useful.

    I suggest make you the connection with the specified port 1935 and see if you get a faster response if you get rejected or doesn't - you can try rtmpt directly - I mean this would save delay

Maybe you are looking for