Question about Powerconnect M6220 and out-of-band/management 8024-K connection

I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here.

My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for example port 18 for example) or through connection of the M1000e CMC?

The reason for this question. We recently vlaned our network and CMC modules are VLAN 8 (10.100.8.0 255.255.248.0) and management of our switches is supposed to be on the VLAN 1 (10.100.1.0 255.255.255.0). I can't ping on the affected IPS (IE 10.100.1.15), but our CMC modules are fully accessible (IE10.100.9.120). Our blades are fully accessible and can access all the VLANS on them (they are the ESX host).

Finally, I'm sorry if all necessary information has been provided, I'm not so much a networking guru.

Thoughts?

Thanks for your help

The OOB interface is connected to the chassis management controller by the median plane of the chassis. Traffic on this

port is separated from network traffic operating on the switch ports and cannot be lit or routed to the operational network.

Tags: Dell Switches

Similar Questions

  • A question about the methods and parameters.

    Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

    Taking an example:
    Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

    If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

    System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

    public int calculateAreaOfRectangle (int length, int width) {}
    int area;
    Area = length * width;
    return of area;
    }

    So if you call this method then the output will be returned in 120.

    Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

    And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

  • Questions about the terms and conditions

    Dear team of Adobe Stock,

    I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

    3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

    What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

    Thank you

    Hello

    Please see the link below for help:

    http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

  • Question about the interruptions and priming

    Hello

    I had a few questions about the startup and interruptions in a virtualized environment

    Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

    1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

    2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

    Thanks in advance

    -SC

    sidc7 wrote:

    1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

    It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

    There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

    sidc7 wrote:

    2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

    Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

  • Over 4500 X out-of-band management interface

    Each of the X 4500 switches in our stack has an interface of Fa1 beside the console port series.  My understanding is that this should be used for the out-of-band management of the switch.  Here is the configuration of the interface:

    interface FastEthernet1

    VRF forwarding mgmtVrf

    IP 172.21.2.30 255.255.255.0

    automatic speed

    automatic duplex

    end

    Samba configuration was by default.  The only thing that I changed was the ip address information.  My question relates to things like domain-lookup and GANYMEDE.  I can't use this interface for these functions.  Even if I add the following global configuration to my passage:

    IP domain-lookup-interface source Fa1

    Radius-server interface Fa1 source IP

    the switch is unable to communicate with the reference of DNS servers by ip name-server command or the reference GANYMEDE + servers in the section profile of the RADIUS server.

    In the case of GANYMEDE, the following debug output is produced when I try to open a session using GANYMEDE:

    * 10:24:58.874 29 August: MORE: Queuing AAA request 38 for processing authentication

    * 10:24:58.874 29 August: MORE: treatment demand beginning 38 authentication id

    * 10:24:58.874 29 August: MORE: authentication start package created for 38 (sdavidso)

    * 10:24:58.874 29 August: MORE: using the 172.19.40.31 Server

    * 10:24:58.874 29 August: HIGHER (00000026) / 0: road to connect error no. to host

    * 10:24:58.874 29 August: MORE: choose the next server 172.19.40.32

    * 10:24:58.874 29 August: HIGHER (00000026) / 0: road to connect error no. to host

    * 10:25:05.539 29 August: MORE: Queuing AAA request 38 for processing authentication

    * 10:25:05.539 29 August: MORE: treatment demand beginning 38 authentication id

    * 10:25:05.539 29 August: MORE: authentication start package created for 38 (sdavidso)

    * 10:25:05.539 29 August: MORE: using the 172.19.40.31 Server

    * 10:25:05.539 29 August: HIGHER (00000026) / 0: road to connect error no. to host

    * 10:25:05.539 29 August: MORE: choose the next server 172.19.40.32

    * 10:25:05.539 29 August: HIGHER (00000026) / 0: road to connect error no. to host

    This output shows that I can ping from RADIUS servers:

    HQ-4500 X - SW1 #ping vrf mgmtVrf 172.19.40.31

    Type to abort escape sequence.

    Send 5, echoes ICMP 100 bytes to 172.19.40.31, wait time is 2 seconds:

    !!!!!

    Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms

    HQ-4500 X - SW1 #ping vrf mgmtVrf 172.19.40.32

    Type to abort escape sequence.

    Send 5, echoes ICMP 100 bytes to 172.19.40.32, wait time is 2 seconds:

    !!!!!

    The Fa1 interface cannot be used for these types of functions deliberate or is there something I can do to make this work for my setup?

    Thank you

    Steven

    Given that you can reach the remote RADIUS server, I suppose that you have created a default route for the mgmtVrf:

    IP route 0.0.0.0 0.0.0.0. VRF mgmtVrf

    The other bits you need to address is in mode config-sg-Ganymede:

    IP vrf forwarding mgmtVrf

  • PowerConnect 7000 series in-band versus out-of-band management

    Hi all, I have four Powerconnect 7024 configured as two piles: a battery is dedicated to iSCSI and the other pile is my front-end network. I have the installation of battery of iSCSI with OOB management with the port connected to my pile of front-end but how do I set up the front battery management? I tried to configure in-band management during installation but stupidly did not test and now its deployment and I can't handle the battery at a distance. How others remotely manage their kernel stack if there is nowhere else to connect the port OOB for? The powerconnect switch discourages in-band management, but I don't see why you would not use it in this situation. Thank you, Christian

    If you can connect to a laptop to the serial port, the RJ45 beside the OOB port corresponds to the serial port, but you would need a cable designed to convert the RJ45 and then possibly series to USB and series. You can access it through putty and set a static ip address to use on the OOB port with the command ip address ip address {ip address {mask: prefix length} | dhcp}

    It is also set to dhcp mode by default so if you connect to the OOB port for something that gives DHCP it can get an address.

  • question about sending mail and the use of UrlEncodedPostData

    Hello

    I need to send over https three things:

    (1) framework, which is a byte [] object, and has some information about the device and the things that need to be sent to the server

    object String 2) imei - imei of the device.

    (3) data - some data, which are a String object

    now I need to use URlEncodedPostData, but...

    UrlEncodedPostData _post = new UrlEncodedPostData(null, false);
    
    _post.append("frame", ???)-> my frame is a byte[] object
    

    so, what should I do? should I change channel frame? but, later when I send the _post to the server that I use:

    _httpConnection.openDataOutputStream(_post.getBytes());
    

    YH, the problem is-how to put a byte [] object to the urlEncodedPostData and then send it?

    The point of encoding is to ensure that special characters can be detected correctly.  There is no URL address, as the settings.

    You will notice that the class that you are trying to use is called URLEncodedPostData.  I don't know if the same URL encoding is used in BOTH and given POST, but I think this class should be used in the data of PUBLICATION, rather than to GET data (look at the name).  You will find that the process of encoding data GET is not so difficult and I don't know if you look you will find J2ME coding code on the Web, that will help you create correctly to GET URL format.

    However, I still think you should consider the difference between GET and POST, and what data is passed by each type of application.  I think that if you had done that earlier, you wouldn't be in this position, you understand better my answers and you will understand how to create the queries POST you have to best use later.  GET and POST are NOT Blackberry or specific RIM, they are the Web specifications and used on all platforms.  There is a lot of documentation out there.

  • questions about 2100 wlc and lwap connection

    Hello

    I have a few questions, I hope you can answer me.

    In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

    The distance between each point of access to more than 30 meters.

    1. the distance between the access points affect the accuracy or the stream. How can I calculate this

    2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

    I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

    BR

    Yamani

    Hello Ahmed,.

    Yes the distance between AP affect the wireless signal.

    to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

    You can check the following links for design and RF management

    1) http://tools.cisco.com/squish/1Ea09

    2) http://tools.cisco.com/squish/51a58

    for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

    as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

    Kind regards

    Talal

    =========
    Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

  • General question about the updates and version number

    I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

    In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

    Version - VMware ESXi, 5.1.0 1612806

    Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

    I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

    Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

    I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

    I hope this makes sense.

    Thank you

    This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

  • Question about subjects, books and tables of contents

    I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

    It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

    The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

    If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

    P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

  • Questions about Failver customer and rapid failover

    have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.



    -We have two physical locations called "ABC" and "PQR".
    -ABC is the main site.
    -PQR is the backup site.
    -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
    -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
    -Data Guard has been configured between ABC and PQR and it works as expected.
    -Please note that we have a license for Active Data Guard.
    -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
    -We have not yet set up a Data Guard Broker.

    We want to achieve under objectives:


    Objective 1:
    -------

    Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
    I guess it's called 'Fast Failover'. Please let me know if I'm wrong.

    Issues related to the:

    -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
    -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
    -What the client application / which is already connected to the CARS.
    -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?


    Objective 2:
    --------

    As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.

    -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.

    -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
    However before that happens, standby database should become primary because the client session can perform write operations.

    According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.



    Issues related to the:
    ----------

    1. Please throw some light to reach above features.
    2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.


    Could you please help?

    Thank you

    I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

    Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
    http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
    What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

    Edited by: P. Forstmann on Dec 8. 2011 20:30

  • Questions about apex_web_service.make_request and collections

    Hello

    I began using with Apex Web services, and I have a few questions about the apex_web_service.make_request procedure. You can pass a name of the collection as a parameter. I'm a little confused on this parameter from the collection...

    This is perhaps a silly question, but the documentation is not very clear, so... This procedure always inserts just a line in the collection (with the XML returned by the web service call), or are there cases where several lines will be inserted?

    If there is still only a single row, what are the practical reasons to use a collection for her? I ask because in most cases interest you about the columns/rows to display in a form or a report in the Apex and I don't see the advantage to store in a collection of single-row, but I may be missing something...

    If the response contains several rows of data, it will be automatically extract the lines and insert them into the different lines of the collection? (posts...)

    What is the best approach then to extract several rows returned in the XML response and insert them into a collection? Currently I use XMLTABLE in a loop and call apex_collection.add_member for each row returned. is there a better way to do it?

    Thank you
    Luis

    Luis,

    the webservice returns only one row in the results collection.

    XMLTABLE using is a good idea, instead of using a loop, you can also use APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY or CREATE_COLLECTION_FROM_QUERY_B (B for bulk which may mean 'fast').

    brgds,
    Peter

    -----
    Blog: http://www.oracle-and-apex.com
    ApexLib: http://apexlib.oracleapex.info
    BuilderPlugin: http://builderplugin.oracleapex.info
    Work: http://www.click-click.at

  • Question about importing RAW and JPEG

    Greetings,

    Support of Adobe at the following page talks about the "import and preferences file management Definition:

    http://help.Adobe.com/en_US/Lightroom/3.0/using/WSA66356E1-47C3-405f-8E7F-0FD7AAEB0575.htm l

    I have a few questions about this, and I would really appreciate your input gtting. (I also posted this question on this page, but I don't know if it was the right place...)

    1. that means 'otherwise, Lightroom treats the JPEG in doubles as a file? The JPEG format is not available at all in these circumstances? What can I do with this file "jpeg"? Is located in the same folder as the RAW images?

    2. my understanding is that the JPEG image contains the treatment unit (e.g., Vivid, sharpning, etc.); When I import pictures from my Nikon (NEF) raw, LR does not apply to these parameters, and the image I see in LR is * really * gross (i.e., bland and "free upgrades").  If I shoot and bring in JPEG and RAW, LR is it possible to have LR somehow automatically "make RAW image look like the JPEG?

    Thank you in advance!

    Zevi

    (1) No, it simply as an initial overview.  LR replaces this overview as soon as it renderes its own.

    (2) the profiles are already built for Nikon and Canon.  Look in the calibration Panel in the develop module.

  • Question about AP Autoinvoice and macthing the invoice?

    "Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.

    The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?


    Thanks in advance!

    Hello

    You have not need manually match invoices to the BP.

    The standard functionality of the remuneration to the receive function is as mentioned below:

    You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

    After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

    When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

    I hope this helps.

    Thanks and greetings
    Jeanny.

  • Question about apple tv and its characteristics?

    So here's the situation

    I have a data plan unlimited through Sprint and I bought an Apple TV so that I could use this data to stream Youtube and Netflix videos on my apple tv via the peer-to-peer connection. I got this feature to work with Apple TV connected to my houses wifi and turn on my bluetooth and Wi - Fi on my phone. The problem I have is that he still uses data on my home network and most of the people who would not be a problem but I have satellite internet and satellite internet has limitations of predefined data you cannot exceed. So my question is can I buy a wireless router for my apple tv and use that in the flow of my phone and which wireless router will not be connected to a modem? So, essentially, it would emit just a wireless signal that could be used, but would not have access to the internet via my ISP. Would this work or am I just screwed?

    For me the most logical thing would be to set up your phone as a hotspot and connect the Apple TV to this network.  I wouldn't connect to the WiFi at home.

    It seems by connecting the phone and the Apple TV to the home Wi-FI you are using Airplay.  How do you run the phone to get the data from your wireless connection when it is connected to your WiFi?  Seems that the phone would be the internet connection to the home network only?

    If you want to test your idea of ghost network without having to buy another wireless router, simply disconnect the existing internet by satellite of the wifi at home and see if it works without an internet connection.

Maybe you are looking for

  • Not a Question, an apology

    I need to apologize for an outrageous insults earlier this evening. Whenever I loaded several tab FF crashed because I use an older version and I was told that FF would eventually turn it off I guess that's what happened. Whenever he crashed he sent

  • iPhone will not update to iOS 9.2.1 or install applications or update

    OK, so I have not been able to update my apps or download... I also can't update the iOS to 9.2.1 software it says error when updating the software can anyone help me?

  • Product name: G5350uk: Windows detected a hard disk problem

    Hello Windows 7 Serial number: [personal information deleted] Product name: G5350uk Number of hard driveT3750528AS Windows and Intel are telling me that my hard drive is about to fail, but no reason is given. The drive is only about a third full.  I

  • How to use Maxtor One Touch II and Retrospect Express

    I have Maxtor One Touch II and Retrospect Express 9.0.2.102. I guess the 2 go hand in hand, but don't know how to start.  I am backing up my files Mac 10.6.8.

  • Nokia xpressmusic mobile

    the screen of my phone seems to be melting all the colors in one.my prob is I have of the grandkid of the captain on phone I want to load onto laptop led connected but watch not on laptop, you can't hear when I plug it, what can I do