Question about product ID records and the screen

Hi, I play a lot of yahoo pool and we must use the record screen programs to ensure that we do not cheat in most leagues here. One proposed condition is that we show our information in our records system. I ask here to learn more about the potential dangers. I noticed that in one sample screenshot, the ID of the product shows. That's my biggest concern. Can you confirm/deny it would be dangerous to put out this info to anyone?

Hi SeaDogsFan,

Never share your number to identify product with a person who is not a legitimate representative of Microsoft.

Software piracy comes in different forms, some more known than others. Each type of piracy is unique and often requires unique protection methods.

Counterfeiting is a common form of piracy. Others include loading hard drive, Internet piracy and casual copying or softlifting. Casual copying is the sharing of software between people in a way that infringes on the Software EULA. An example of casual copying is if someone were to get a copy of Microsoft Office XP and load it on his PC, share it with another person who took on his PC, then share it with a third person who charged on his PC and so on. This form of piracy is widespread and represents a large part of the economic losses due to piracy. It is this form of piracy, casual copying, that Microsoft is mainly intended to reduce with Product Activation.

Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Kind regards

KarthiK TP

Tags: Windows

Similar Questions

  • Questions about close cache events and the defeat strategy "ALL".

    I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.

    This brings me some questions about the event cache stream closely when the strategy using ALL:

    (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
    (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
    (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
    (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

    Hi Tom,

    near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

    It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

    Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

    A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

    Best regards

    Robert

  • question about document process plans and the properties of the form object

    The new version of the Workbench has a tool that allows us to print a report that displays the properties of the object used in a model or process shape card? For example... showing all properties such as size, models, fonts, by default, if a field is required or not, etc...? I also check to see if this feature has been added to the Workbench for Process Maps?

    No, it isn't, but there is a blog by John Briinkman entry that will analyze your form template give you some of this information. Here is a link to the blog entry:

    http://blogs.Adobe.com/formfeed/2011/05/updated-form-report-tool.html

    Paul

  • A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

    A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

    My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

    I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

    Four Messages are appearing: the first is on the top.

    Other messages are:

    2. ' cloudd wants to use the kenchain 'local products '. '

    appearing on the screen and ask for Keychain password password.

    3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

    4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

    It of an upheaval and please suggest how to solve this problem

    Hello remy!

    I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

    If your Mac keeps asking for the password in the keychain

    Thank you for using communities of Apple Support.

    See you soon!

  • Satellite Pro L300-21F does not start and the screen remains blank

    L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

    So my questions are:
    1. He's probably right?
    2. is it a common problem with an easy solution?
    3. what else can do before shelling out for a new Board of Directors?
    4. is there a link where I can find how to disassemble the case?

    Any help appreciated

    Hello

    > 1. He's probably right?

    Yes, it looks like motherboard failure

    > 2. Is this a common problem with an easy solution?

    If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

    > 3. What else can do before shelling out for a new Board of Directors?

    I don't think you can do anything with fried mobo

    > 4. Is there a link where I can find how to disassemble the case?

    Take a look at the site called irisvista.com

  • Re: NB200 - making noise and the screen turns white

    Hello

    My laptop makes the high pitched noise and the screen turns white. Please help with this question.

    Thank you

    Hello

    It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

    Welcome them

  • Freezes and the screen turns after stopping

    Hello

    I'm having a lot of trouble with my iMac, Retina early 2015, and I can't understand what is wrong with it. The problem is that if I use the mac for a period of time, it can sometimes be almost a whole day, at other times, it may be an hour. It has all suddenly freezes them completely and the only way to get it to work is to make a difficult stop (hold the power button until it turns off).

    But when I try to turn the screen does not light. And I still have to make a hard, sometimes stop, it takes about 5 - 6 times before the screen lights up. And if the problem occurred once and I try to use the Mac immediately after, it freezes in the first 10 minutes, and the whole procedure must be repeated for another 10 minutes of use. The only way for it to not freeze is if I use it for like a day, but it gives me only about 3-4 hours before the problem occurs.

    I sent it to a repair shop for repair, I thought that maybe it's the hard drive. They ran a few test Apple and was told that it is not the hardware, but the software causing the problem. Then they plant restores and gives back to me. But it does not solve the problem.

    Any thoughts on what could be the cause of this?

    It is impossible to say without knowing what siftware you may be running. A report of EtreCheck please http://www.etresoft.com/etrecheck

    You can also do a physical check of base using Apple's Diagnostics using Diagnostics - Support Apple Apple

  • Change the resolution of the screen and the screen went black

    Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

    The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

    I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

    Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

    All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

    Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

    http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method

  • The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

    The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

    Start by:

    Reset the PRAM and NVRAM on your Mac.

    MacIntel: Reset of the controller (SMC) system management

    Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

    If you are unable to start;

    Reinstall El Capitan without erasing the drive

    Please make sure that you back up.

    1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
    2. Select disk utility, then click on the continue button.
    3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
    4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
    5. Quit disk utility and re-enter the Utility Menu.
    6. Select Reinstall OS X and click on the continue button.

    Also, see this tip for user: basic steps for the OS X upgrade.

    If this doesn't get you;

    Install Yosemite or El Capitan, from scratch

    Backup if possible before proceeding.

    Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

    Select utility disc in the Menu Utility, then click the continue button.

    When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

    Click Delete in the main window of disk utility. A panel will fall.

    Define the type of Format Mac OS extended (journaled).

    Click on the apply button, then wait for the done button to activate and click on it.

    Quit disk utility and re-enter the Utility Menu.

    Select reinstall OS X and click on the continue button.

  • IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

    IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

    I have not updated my phone to the new IOS

  • My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

    My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

    How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

    To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

    This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

  • Arm, wrist and the screen does not light.

    I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

    Hello

    It is a community of support based on the user.

    To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

    https://www.Apple.com/feedback/watch.html

  • Satellite L405D-11V - freezes and the screen goes black when you watch the video

    OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

    I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

    However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

    Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

    Thank you

    Hey Buddy,

    You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
    What operating system you use on your L405D satellite?

    To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

    In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
    If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

    If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
    Explain your very detailed problem. I think that everything can be clarified then. :)

  • Equium A20 fell and the screen turns off always

    Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

    I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

    Anyone with the solution?

    Thanks in advance...

    Hello

    > but as soon as windows load screen is black. I can t understand
    This means that the display output has accidentally changed to an external.

    Have you checked if something would be visible on the second external monitor?
    Select this check box.

    In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

  • Satellite Pro 6000 freezes and the screen is weird random pattern

    Hello

    I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

    I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

    Hello

    It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
    Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

Maybe you are looking for

  • Update to iOS 10 with Windows XP

    I have an old PC with Media Center, Windows XP SP3 (cannot afford to upgrade or buy a new PC... on disability 8 + years).  It has iTunes installed 12.1.3.6.  Whenever I try to update my iPad or iPhone to iOS 10, iTunes says I need iTunes v12.1.2 and

  • Tecra M4 - Mainboard double display Hack

    Hello As my Tecra M4 died because of a broken three months CPU fan earlier, I already knew that, this laptop I'd then buy: a Tecra M4 :) I really like this camera. So now I have my new Tecra M4 (40th) and dismantled the old components. (except the mo

  • How to convert from MSV to mp3?

    Hjow clue I can convert my SONY WAV file to an mp3 file?

  • Minecraft does not work with Windows 7 or on my computer?

    I have install and it comes up with Bad video card drivers! ----------------------- Minecraft could not start because it did not find an accelerated OpenGL mode. Generally, this can be corrected by updating the video card drivers. -BEGIN 7fe0271 erro

  • How to make a UN suppressible but accessible file in windows XP sp2

    HelloI use windows xp sp2, I'm in an area I need to lock the files of disk F: in my computer but I need to access it, then how can I make my files not suppressible but accessible.