Question about registration of vista Toshiba - Satellite A200-1CR
In my laptop Toshiba vista registration component config.exe program does not work.
Please help me? How can I make this work?
You received the Toshiba Recovery CD with your beautiful Sat A200.
I would recommend setting the notebook back to factory and after the new OS installation check settings if the Toshiba vista registration tool is working properly.
In other cases, you can visit Toshiba Europe site and register for your laptop on the Toshiba site!
I have a problem... or that's what I think it is... I bought a new TOSHIBA Satellite A200-1CR with Vista Home Basic preinstalled and I upgraded to Vista Business. The problem is in what regards the use of the FN key with additional shortcuts... With the help of these shortcuts is tricky because I don't really know how they work... Under Windows, after starting at the top of the screen, I have a few buttons (exactly the FN shortcuts) that I can use by keeping the mouse over and they slide down, but the problem is that after these buttons appear to the use of the FN keyboard hotkeys is disabeled... or kind, because I can use FN + F9 , FN + F10 shortcut FN + F11. Please help me and tell me if this is normal... and if not tell me how can I fix. Thank you!
Oh, that's normal, Don t worry. You can disable the buttons and then a little work with the FN keys.
Just remove that bar on the top of the autostart and he won´t bother you more.
Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.
Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)
If you have any other questions, then just ask.
See you soon
I have a Satellite A200-13O with 120 GB HDD, 1.8 GHz Intel Centrino Duo, 1 GB of ram, but there 2 512 chips installed.
If I upgrad 2 1 GB ram is it possible to improve performance...?
and what happens if I switch to 2 GB dual channel...?
It has Windows Vista Ultimate...!
Do you mean that you would use a single module of ram of 1 GB?
Well, you would still have 1 GB of RAM, but the dual channel cannot be used due to lack of second module.
So, if you can, try to use exactly the same 2 modules for best performance of the memory.
The laptop supports two memory locations so you can't do anything wrong insert 2 modules in slots 2 to run dual channel modules
It is a bit ridiculous - I have a laptop A200-195 which is not even 6 months and I tried to install the new Lost: The Video Game and it says that my graphics card is not compatible with Shader 3.0 which ever it is. What should I do to solve this problem, as I guess I'll come on this problem with probably all other games I buy goes forward. How much will cost to upgrade?
When I install the said: "your graphics card does not support the" shader model v3.0 ".» The game requires it to run. »
When you start the game after installation of a screen comes up saying that I have not the minimum requirements:
Its has a cross next to my graphics card, saying that my card is a mobile intel 945 GM Express Chipset Family. At the back of the game box, it said that minimum video card must be 128 MB DirectX 9.0 c Shader 3 enabled (256 recommended) compatible video card. In my information system it says my Ram adapter is 224MB - isn't that enough?
Its also a cross next to Shader Model to say mine is a 2.
All other system requirements are agreed.
Can you explain to me what is ridiculous there? You bought the laptop with Intel graphics card and every beginner can tell you that this graphics card cannot deliver good game performance.
Have you talked with your dealer before you bought your laptop? Have you asked about the graphics performance for laptop?
I think the move to Vista, but some things are confusing me. I have a Satellite P15 with an OEM XP Home installed package. Am I good to buy another DVD of Vista OEM use to level or that will cause some kind of conflict with the etc. hidden restore partition.
I understand it to be if I chose to upgrade and want to completely install Vista from new I have to reformat my hard drive? It's a tough call. Is it possible to simply upgrade to Vista, but keep everything I already installed at all? I have tons of useful stuff and tons of waste which I'm also not lose and don't spend hours, it backs up all fancy, all as I don't want to have dual-boot to be honest. It's Vista or XP, not both for me.
I guess my biggest concern is another package to OEM OEM compatibility and whether the P15 him will at all.
See you soon!
As prior use has already proposed, you must create a second partition on your HARD drive and install Vista as OS second on the created part.
This should be a better way to use this operating system with Windows XP.
I installed the Vista in the same way. First of all, I created the partition Magic 8 partition and then installed the Vista operating system.
and I must say; He works ;)
I would like to ask something...
I have toshiba Satellite A200-1cr with 120 GB HARD drive...
I would like to change my HARD drive. I found a disk hard 2.5 "with 250 GB.
My questions are the following:
(1) my knowledge of the workstations are very very good. Is it easy to change myself?
I guess it is, but I want to be sure... I guess that is on IDE, right? No SATA at all?
(2) if I changed it I lose my warranty?
(3) can I give my laptop Toshiba in Greece official store and let them make the change?
May I take in an informal shop, too?
(4) can be put on the laptop 2 x 250 GB such US new computers laptops from toshiba?
Is there enough space in the laptop for such a change?
Thank you in advance...
It is good that ask you the question.
(1) the Satellite A200-1CR supports SATA and no IDE interface and that's why you need a SATA HDD. It of really not difficult to replace the HARD drive and as far as I know, you should find a few details in the user manual. There is a useful statement and photos that explain the entire procedure.
(2) hm AFAIK the drive replacement HARD will not void the warranty, and has no effect on the State of security.
(3) you can also contact the maintainer authorized Toshiba in your country for a HARD drive replacement, but in my opinion that is not really necessary because the replacement is not very sensitive. As I said above, check the user manual.
(4) I don t think that your laptop will support 2 x 250 GB HARD drive.
Of course, there are a few other series laptops which are abele to support two hard drives but I n t think that your laptop A200 support.
Just a small comment on the new HARD drive:
The fact is that some more HARD drive are not supported by the BIOS. I mean an upgrade to 120 GB to 250 GB drive HARD is really a leap one possibly your BIOS would not recognize the HARD drive correctly.
So I recommend to test the HDD first before buying.
I am owner of a laptop Toshiba Satellite A200-1cr and suddenly one morning, I can not charge my battery...
I tried with another adapter that I bought for another laptop a few years ago and it worked perfectly...
I have change the power supply cable before the adapter, that we... http://www.digitalkind.co.uk/INU_Products/INU_ProdDetailsL8.ASP?ref=57306972
and nothing has changed, I realized that I need a new ac adapt power...
It's for my laptop... http://toshiba.icecat.biz/en/p/PA3290E-3AC3/AC%2520Adapter%2520120W.htm
But now I have two important questions...
1. since I tried, the power adapter works fine, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same features...
2. is the replacement of the power supply covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...
Thanks in advance and sorry for my English...
> 1. As I've tried, the power adapter works well, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same characteristics
If the AC adapter doesn't supports exactly the same specifications as the original Toshiba AC adapter so I wouldn't recommend using it! This could damage the motherboard! So if you want to use it you must make sure that the ampere, Volt and Watt values are the same!
> 2. The replacement of the power supply is covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...
The AC adapter belongs to the laptop and it s covered by the warranty also.
So if you warranty is still valid, don t waste time and contact the ASP in your country!
Explain what s bad guys and I m sure will be able to help. The adapter must be replaced if it s defective!
In this case, I would not recommend using 3rd party adapters if you will get a new ASP.
Since a few days, I bought a Toshiba Satellite A200-1CR. I am very satisfied with the laptop, although I do not work for Vista Home Basic Edition, because it is not to support the programs of the sum, so I change my operating system from Vista Home Basic to Windows XP SP2 home edition.
If I prefer to reformat the laptop and install Windows XP service pack 2 (32-bit or 64-bit, not sure yet).
However I do not know if I have to do something special for him, because it's my first laptop I have and I haven't had that one time a laptop with drivers on a CD. Now I m operating system, I think I need a driver s disc switching.
If I changed vista to XP is there any software support?
Vista for XP service pack2 change possible or not?
Someone help me. If changing the operating system where I can get the driver software?
Yes, you can install Windows XP SP2.
There are two things you need to be aware of:
(1) you need a SATA of F6 driver on a floppy disk when installing XP. Otherwise XP does not detect the SATA HDD. Search for "SATA" of this section, it is already been covered several times.
(2) after installing XP, you should download and install the XP A200 drivers from the Toshiba Europe Support/Drivers site
Toshiba Satellite A200-1CR
By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.
I have already (without success) tried:
-Unlock the tray, insert the rescue CD and power on
-Remove the main battery and power on with AC adapter only
-Insert a bootable USB stick/external HARD drive
The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).
What could be wrong?
> By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black
Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
You can try to check the RAM modules.
Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m
I am a student sri-Lanka, Russia.
I bought a toshiba satellite A200-1CR Russia laptop computer, but it came with windows vista basic Russian.
So I can't understand anything and the dealer said that they cannot change the language to English.
So, how can I get the English vista and drivers.
Please answer me to my private email address.
(Toshiba satellite A200-1CR
If you want to install the English operating system, you must get OS DVD facilities on English. All the drivers, tools and utilities for your laptop, you can find on Toshiba page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for assistance
All that s!
I have this laptop:
Model name: Toshiba Satellite A200-1CR PSAE0E-02G012G3
The keyboard is broken (of
Can I replace it?
I want to buy a new keyboard.
This is possible. If you want to buy and replace the keyboard please contact the service provider authorized in your country.
The nearest ASP, you will find here:1>
I have toshiba satellite a200-1cr. I'd like to expand my ram up to 2 or maybe 3 GB.
Can anyone tell me what kind of ram I should buy, type, etc...?
Also I don't know if I have 2 x 512 MB or 1 GB.
I have a free slot or I have to remove one of my 512 ram?
PS: I can't find my model in the toshiba Web site more... (model. psae0e No.)
After a long investigation and after visiting various websites I found the info that this laptop was equipped with 2 x 512 MB DDR2 (667 MHz) modules
So if you want to upgrade the RAM you can use 512 MB, 1 GB, or 2 GB modules.
Have a look here:
I have a toshiba Satellite A200-1cr model, with a motherboard model k000051290 that no longer works...
If I have to buy another...
The problem is that I can't find another with the same model, at a decent price... because... 400 euros for a new Mo...
I better buy another laptop...
Then... I found a MB TOSHIBA SAT A200 A205 Motherboard ISKAE LA34 CONDOM, model K000054260, refurbished... from $ 150 on Ebay...
Now, I ask you...
I saw the picture with this MB and it is the same with my MB... now... will I have problems with my laptop if I buy this MB?
What do you recommend?
In my opinion, the Board Member should be ok. It must correspond with you model Satellite A200.
The measure of the motherboard is the same.
See you soon
I have a Toshiba Satellite A200 and I doubt, in everest, I can see the key of Windows Vista, but it's different to the Windows key in the tile to the bottom of the laptop.
I change anything in the laptop because I bought, I have use once the recovery cd, but I have not a pirate key or something like that.
Why this different key?
Post edited by: Admin
I agree with the user above.
The serial key you will find at the bottom of the device is not similar to the serial key that can be read using a few 3rd party applications!
But you don t need such series on your Toshiba laptop key.
The restore CD contains an image of Toshiba which is already activated!
Maybe you are looking for
In the last few itterations of Firefox I not was able to work at all bookmarks. The first problem is, you save a bookmark, but where does it go? In most of the browsers and Firefox until a few months ago, the bookmark is immediately visible in the li
I updated my old ipad2 on the 22.3.2016 and I was not able to activate my ipad and itunes does not recognize it. It has been two days now! Please help someone!
I get 2 items "Base system device" in Device Manager after installing Windows7 Professional 64-bit. #1. List of hardware IDS: PCI/VEN_1180 & DEV_0592 & SUBSYS_03E7103C & REV_14 PCI/VEN_1180 & DEV_0592 & SUBSYS_03E7103C PCI/VEN_1180 & DEV_0592 & CC_0
Is it possible to add using Motorola? There is no drive, meeting and sleeping. It would be great add more items as cooking/Yardwork. Hands can be in the juice of chicken or the mud and you can't get that on phone, but an important call you've been wa
Hello, I would like to change my processor on my workstation z230 brand new. I try to use a xeon e3-1270 v3 instead of the e3-1225 delivered v3, but the station will beep beep beep beep on startup with no display. When I look at my bios version I ca