Similar Questions

• Questions about memory for Mac beginning of 2008

  Someone at - he used the Adamante memory in all their machines?  Available on Amazon 16 GB(2x8) 249 more 5.61 hii - 255,000 Macsales has their image on sale now for $279, usually $299

  Upgrade of RAM Apple Adamanta 16 GB (2x8GB) for Apple Mac Pro early 2008 (8 cores) 2.8 GHz CPU MA970LL/A DDR2 800 MHz PC2-6400 ECC Fully Buffered 2Rx4 CL6 1.8V FBDIMM

  by Adamanta memory

  Adamanta has a lot of memory on their site, but I think they mainly sell through Amazon

  Question # 2

  I'm looking at the specs on my early 2008 and noticed that the motherboard has 8 slots for memory-what is it for and why they are not met?

  Better buy RAM by Crucial > http://www.crucial.com/usa/en/memory-info?cm_re=top-nav-_-flyout-memory-_-us-mem ory

  I highly recommend them for the RAM.

• How do to transfer pdf stored in my generation iBook app for mac via airdrop ipad4

  How do to transfer pdf stored in my generation iBook app for mac via airdrop ipad4

  Hey k_ahlad,

  It is not possible to share a PDF in iBooks using airdrop. You can, however, send a PDF by email from your iPad. See this help page - read a PDF - iPad User Guide

  Specifically -.

  Send a PDF file. With the document PDF is open, press on , and then select send.

  Thank you for using communities of Apple Support.

  Calculation of the happy.

• Unable to connect via IEEE 1394 card reader in Satellite A100-988

  I tried to connect an i Link on my A100 port Compact Flash drive. I'm using a Firewire Extreme of Sandisk drive and the connection with a 4 pin cable 9-pin.

  Device Manager indicates that the TEXAS INSTRUMENT IEE 1394 CONTROLLER of BUS firewire is enabled and working properly. Unfortunately, my computer can not see the map. Any ideas?

  Hey Buddy,

  already enabled smart card service in the "services"? You must enable this service if it is not already done.

  You can reach services' by clicking on START-> Control Panel-> administration-> Services-> smart card tools

  Then go into this service, start him and to do as that kind of "autostart".
  I hope my tip helps you with your problem. :)

  Welcome them

• Satellite M70 (PSM71E) Firewire / IEEE 1394 Device number

  I recently bought an Iomega eGo 250 GB Portable Hard Drive with USB 2.0 connections and Firewire 400.

  The Firewire port on the drive's type 6 pins. My Satellite M70 notebook computer has a Firewire 4 socket pins on the left side. I have an external power supply for the reader of the eGo. When I connect it to my laptop using a cable Firewire 4 pin 6 pin is not recognized. Nothing happens at all. I tried to disable the IEEE 1394 network adapter and reboot of Windows XP Home Edition with no luck. This drive connects and works very well using the USB cable, but I prefer using Firewire. The reader connects and works very well using the Firewire cable 6-pin 6-pin on my PC at home.

  Is there something I need to do to make the drive work using the Firewire port? I have no other Firewire devices to test the port with.

  Any help would be appreciated!

  Maybe the cable is defective? Is it the cable supplied with the HARD drive or did you buy it separately?

  You can buy more 6-pin to 4-pin adapter online. Google "firewire 6-pin to 4-pin adapter.

• Questions about Satellite P10 554

  Hello

  I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me.

  First of all:
  When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, but when it needs to turn off just reboot again. If I repeat the closing down directly after this restart, normally it turns off.
  This problem occur only when I use the power supply in battery mode.
  I can't say that to me...

  Second:
  I have a mini PCI Wlan card for my unit, works very well, but I wonder if it is possible to get the Wlan switch switch work whith it? Or is it only possible whith some special maps? It is not so important, but it would be nice to know if there is a trick or something to get the switch used.

  Best regards
  Gabbagandalf

  Hello

  Regarding your first question;
  I'm a bit confused of m are sure you n t use the restart option?
  I never noticed anything like that on my laptop

  Usually, if I use the Shut down option, I can choose between standby, hibernation, restart and shutdown. If I use the stop that the laptop turns off as it should.
  Maybe it's time to s for a reinstallation of the OS?

  On the second question.
  The switch on the left side for laptop was designed and developed to pass on the WLan card antenna.
  Usually, you should be able to use this switch and to toggle WLan card functionality

  Don t understand why it should not work?  :|

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• Satellite Pro M30 in IEEE 1394 error

  Hello...
  I think I have a problem whit the IEEE 1394 driver

  I can't find the drive to any party, and the cd of drivers do not have this driver, I don't know how to solve, and the re-installation of the S.O. do not solve me the problem...

  Anu thing?

  Tank is a lot

  Hello

  you have runing OS OEM Toshiba (Toshiba Recovery CD) or you install a clean OS (XP full version)?

  It would also be good to know if the IEEE 1394 port has worked in the past or if necessary directly after purchasing the laptop?

  Have you checked the IEEE 1394 entry in the Device Manager? Try to reinstall the driver (I think this is a standard windows driver)!

  Sammy Bye

• I.LINK IEEE 1394 connection

  I have a Dell Latitude D620 Laptop and need to buy an i.LINK IEEE 1394 on my Sony Digital 8 camcorder cable to transfer the video.  Someone has an idea how I'll be able to connect the IEEE cable on my computer?

  
  

• Satellite R830: Question about power for battery usage options

  Hello world

  I recently bought a R830-182 (detailed configuration below).
  I had to update Windows 7 Home Premium Ultimate because I need to use it on my university network.

  My University gives us an upgrade to windows 7 ultimate edition, but I had to do a clean install (from inside Windows 7 Home Edition, copy the upgrade you can do).
  The key, with what they gave me would not work with the Windows anytime upgrade utility.

  I think that I have installed everything that I need to get the laptop to work, but I'm not sure of the configuration of the battery. The cooling fan seems to be always on, and when the battery reaches 100% charge that he also said that he is in charge.

  My questions are:
  1. is there another program I have to install to allow the computer manage settings of the battery?
  2. do I need to change some settings in the power options?
  3 should. what settings I change in power options?

  Any help would be welcome
  Kind regards
  Alex

  Toshiba Satellite R830-182
  Install Windows 7 Ultimate, clean (because my University product key does not work with the windows anytime upgrade)

  Toshiba programs installed
  * EcoUtility
  * HDD Protection
  * Resolution + Plugin
  * Sleep utility
  Value of additional package

  Programs running in the taskbar
  * Dropbox
  * TwoFingerScroll
  * Avast antivirus Home edition
  * Intel HD Graphics
  * Synaptics pointing device
  * The Bluetooth Manager
  * Drive optical autolock
  * EcoUtility
  * HDD Protection
  * Programs standard windows 7, Center of Action, battery, speakers, wifi.

  Hi mate

  I think this Toshiba document should help you get the best power settings

  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Usually if the battery is fully charged, the battery indicator should move from orange to blue (or green).
  If it does not then it means that the battery still in charge.

• Question about BIOS for Satellite Pro A10 files

  Hello

  I have Toshiba Satellite Pro A10 and later yesterday, he won't, he past the TOSHIBA start screen and then black with a flashing cursor, it didn't leave me in advanced settings or the settings of the BIOS, a friend told me I need to Flash BIOS, I came across the site and found only a BIOS update and management told me to use the floppy drive , he said when I unzip the file I get an .exe file which I opened and it will give me three files, one for the CD ROM, one for the floppy drive and the third I don't remember, but it didn't happen, when I unzipped the files in a temporary folder, but I never had the files.

  I think I had to have it on my own laptop, and then it would be extracted properly, because my laptop does not work I can't do and even if I put the files on a disk, they are too big.

  Then...

  Where can I get the files from the BIOS that I can put on a floppy disk and then I can boot from that disk and it will fix the BIOS?

  Thank you

  Hello

  OK, follow these steps:

  Burn the file bios to CD on a CD, boot from it and update your bios. It's a simple and easy way. I Don t understand why it shouldn´t work, given that I ve updated my bios in the same way. I burned the image to CD and booted from this CD.

  Please answer perhaps you just made a mistake when you think to (I sometimes do too much, not often, but it happens..)  :)

  Welcome them

• Question about battery for Satellite L300 - 17 L

  Hello to all peoples,

  I just bought a laptop Satellite L300 - 17L.
  Who can tell me how many hours I leave the battery to be formatted?

  I put t know what you mean. Only, you can format a HARD disk, but not a battery.

  Look in the manual for more information or tell me exactly what you want.
  You can find the manual on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online manual Toshiba

• Question about warranty for Satellite L300D 242

  Hi, I bought my book of neckermann.de last year and I have saled by tariffs, the last of them was October 15, 2010, was counting my monitor Hat an accident and I didn t see nothing, I want to know if Toshiba can repair with the guarantee and the number of days to take if I send to support or TechHi ,

  I bought my book of neckermann.de last year and I have saled by rates the last of them was October 15, 2010, unfortunately my monitor Hat an accident and I didn t see nothing, I want to know if Toshiba can only repair with warranty and how many days take if I send to support or technical Service because I need my laptop for my work.

  And if you know how do I be fortunately. Thank you.
  NIC Service, because I need my work pattées neetbook. And if you know how do I be fortunately. Thank you.

  Hello

  You have registered your laptop on the Toshiba registration page > http://eu.computers.toshiba-europe.com/innovation/generic/services_warranty_reg_map_eu/

  Anyway, if you need repair contact Toshiba service provider in Germany.
  How to do this you can find on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads > find an ASP.

• Question about RAM for Satellite A100

  No standard memory pa3412u - 2M 51 (512 MB 533 MHz) with PA3411U-2M1G (1 GB 533 MHz) will work properly?

  My laptop is satellite A100-847

  Hello

  Both modules must support the same specifications! But you can mix sizes of 512 MB and 1 GB module
  DDR2 533 MHz PC2-4200 modules are compatible with the Satellite A100.