Question about Subzones and records by proxy

I'm tinkering with my Jabber/Movi deployment.  We are inscriptions of the transmission by proxy via VCS - E in VCS - C.

The thing that I noticed however is that proxy records don't seem to obey our rules of subzone - they always end up in the subzone of default on VCS - C.  I use the same exact alias registering on the VCS - C internally and it goes into the subzone very well.

When I check the proxy on VCS - C record, the alias is the same as if it was recorded directly.

Is this expected behavior, or my subzones VCS - C would work for registration by proxy?

Hi Nick,

It's true! You cannot save a customer to a subarea in VCS control when registering through VCSe record proxy.

If you try to save jabber in the subzone of the VCS control to use control of bandwidth, I suggest you to configure bandwidth limiting in your "sub-area of course' in VCS control to control the bandwidth for these endpoints registered through recording proxy.

In general, I don't like much to the use of proxy registration, because there are some limitations, like the cash call license when jabbers on the internet ask each other.

If there is no particular reason to use registration by proxy in your environment, I suggest you sign up on the internet directly to VCSe jabber customers.

Concerning

Paulo Souza

Please note the answers and mark it as "answered" as appropriate.

Tags: Cisco Support

Similar Questions

  • Question about business and Service of Proxy

    Hi friends,
    I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

    If your question is only about the performance analysis,
    try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
    For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

    See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

  • Satellite A100-003: Question about RAM and recording model number

    Dear Sir/Madam,

    1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

    2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

    http://img510.imageshack.us/my.php?image=satellitea100003xg4.jpg

    I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

    Thank you for helping me,
    Halin

    Hello

    First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
    Don t worry, register just she.

    With regard to the RAM:

    Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

    In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
    CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

    I hope I could explain something to you. ;)

    Have a nice weekend

  • About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    Hi Michael,

    If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

    One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

    Content

    To manage this content, you are currently subscribed and changing your preferences, select the content.

    Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

    You can select to terminate a subscription to a thread.

    Learn how to manage your subscriptions

    Take care.

  • An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

    An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

    The error was: "an existing connection was to be closed by the remote host".
    (0 x 00002746 WSAECONNRESET error code)

    The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

    Here is the link:
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this helps

  • Windows 7 starts questions about mac and office 2010 following an installation

    It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

    Hello

    Thanks for posting your query in Microsoft Community.

    Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

    http://www.Apple.com/support/Bootcamp/

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • Question about snapshots and virtual machines

    Hi all

    I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

    I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Thanks for your help.

    Hello.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

    That is right.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Exactly the same thing for the upgrades of the OS.

    Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

    Good luck!

  • Question about CR and LF

    Hey guys,.

    Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

    However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

    Thank you

    Hi dora,

    read the Help for the WriteText function.

    There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

  • Question about product ID records and the screen

    Hi, I play a lot of yahoo pool and we must use the record screen programs to ensure that we do not cheat in most leagues here. One proposed condition is that we show our information in our records system. I ask here to learn more about the potential dangers. I noticed that in one sample screenshot, the ID of the product shows. That's my biggest concern. Can you confirm/deny it would be dangerous to put out this info to anyone?

    Hi SeaDogsFan,

    Never share your number to identify product with a person who is not a legitimate representative of Microsoft.

    Software piracy comes in different forms, some more known than others. Each type of piracy is unique and often requires unique protection methods.

    Counterfeiting is a common form of piracy. Others include loading hard drive, Internet piracy and casual copying or softlifting. Casual copying is the sharing of software between people in a way that infringes on the Software EULA. An example of casual copying is if someone were to get a copy of Microsoft Office XP and load it on his PC, share it with another person who took on his PC, then share it with a third person who charged on his PC and so on. This form of piracy is widespread and represents a large part of the economic losses due to piracy. It is this form of piracy, casual copying, that Microsoft is mainly intended to reduce with Product Activation.

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Kind regards

    KarthiK TP

  • M30-832: Questions about memory and DVD player

    Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
    1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

    2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

    Thank you very much

    Hi Richard,

    From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

    You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

    Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

    You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

    HTH)

  • Question about phone and / or Android 1.5

    I have a question or a statement that needs confirmation. If someone could be good enough to help out I'd appreciate it.

    I am a heavy Texter and text on a daily basis, probably an average of about 250 + texts per day. Also, I noticed and I took County, after about 4 hours of texting the android keyboard and also the swype keyboard, affecting the time key to key response starts to slow down and get slow and ultimitely is unbearable to the text with. Even with the home screen and sliding screens from left to right, and as I said it doesn't happen only after some hours of use of the phone. So, I have to restart the phone and repeat for it keep to become lazy and unbearable to text with. I usually reset every morning or when I wake up. This is nothing compared to my sisters Mytouch, which is in fact older than my phone, it can affect his day at the time and not get done with the delayed touch response. I also noticed that his phone is running Android 1.6.

    Now my concern is, if I'm the only one knows this or is it due to a defective phone. What is the Android obsolete 1.5 that many people are talking about who is performing on the phone in this way.

    Basically, it's because of 3 things.

    1. history - more history, more than it takes to load. (If you wipe all messages and try again, you'll see what I mean)

    2 android 1.5 - don't know what the reason, but even on 1.6 devices SMS language delay is AVERAGE less.

    3 Swype - if you have enabled, it tends trolling more than the default android.

    It is not your phone, it's all phones Cliq/Cliq XT... 1.5 hate text messaging.

    In addition, your phone will work more effectively without a task manager. They are nice to have if you need something CF or to extend the life of the battery (no), it actually takes your phone like some processes that would otherwise, and you also have the risk of frost on the phone all together because some group programs are essential and cause the home screen all recharged after their closure. I would like to refer to this site in order to better explain.

    http://tiny.cc/00s5a

  • Question about playlists and file nav

    Research in get a rocket, or a variant of the Sansa, b/c I get lazy with the long method involved in duty sync w/iPod songs and their playlists, even with the Zune.

    I have read the manual for the rocket, and it seems that I can just drag and drop the files on the drive. My question is can I make records, as driving music, trance, etc. And then put different songs in every folder and then be able to go into that folder and shuffle the songs in that folder?

    Second issue (assuming that my answer is not), is on the creation of playlist. Looks like I have to do inside WMP playlists and then sync it to the top? Is there another way? I read an old thread on the use of other software to generate the playlist, but my playlist would be basically all the songs in a particular folder (the one I'm talking to the 2nd paragraph).

    Thank you for any input!

    eli2k wrote:

    I have read the manual for the rocket, and it seems that I can just drag and drop the files on the drive. My question is can I make records, as driving music, trance, etc. And then put different songs in every folder and then be able to go into that folder and shuffle the songs in that folder?

    Yes, with the most recent firmware, you can browse and read in folder.

  • Questions about the sound recorder

    My father wants to do an audio autobiography & burn it to a CD. It's basically a beginner on the PC. It has Windows 7. He wants to use sound recorder to make audio clips & then merge these clips using sound recorder. I told her I didn't know it was possible to do with tape recorder, but I want to ask about it on the forum of Windows. Is it possible to merge audio clips using Sound Recorder? I know that it is possible to cut audio clips using sound recorder. There is a free program called Audacity that would probably work. I have it on my Mac. I have a hard time finding how to use Audacity & I consider myself pretty PC & Mac read and write. Dad would be totally confused! So, is it possible to use sound recorder to merge audio clips or Audacity or another program, the only way to do what my father wants to do?

    I guess he could get a digital voice recorder & download audio files on his PC but it would still need to edit the files.

    NCP

    You can cut but not merge into victory 8 (not sure of win 7) Unfortunately you father wants to do the hard things with an easy program.  There are programs that can do all the above, but they are more complex than Audacity or recorder.

  • question about SQL and VMDK places

    Hello world. Im kinda new here so please be gentle

    I'm confused on the locations of the files for sql.

    At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

    My disks are as follows

    1 OPERATING SYSTEM

    2 DB

    3 newspapers

    They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

    It lies in a cluster HA/DRS and we use them both.

    The question boils down to performance.

    If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

    Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

    How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

    What do you do to get your SQL servers to run in vmware?

    Seems like a basic question.

    The answer seems easy. Separate disks so that they do not fight.

    'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

    Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

    Thank you all

    1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

    Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

    2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

    Yes, the virtual controller is correct.

    If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

    As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.

  • Adobe software, questions about upgrades and why creative suite 6 is not mentioned in my login?

    Hello

    1st question is why I can't find my creative suite 6 in the specifications of my account?

    2nd question, how can I upgrade my software, is it only possible by going cloud? or is it still possible the old way of mode as I'm used to go by downloading?

    concerning

    Philippe

    Hi Philippek,

    I'll try to answer your questions one by one:

    1: If you are not able to find your CS6 in your Adobe account, this means that you might not have saved it. In case you want to find your serial number, check this box. Quickly find your serial number

    2nd: CS6 is last & latest perpetual more offered by Adobe. Especially since you can choose our Creative Cloud products. To learn more about Creative Cloud, check this box. Software and services for creative professionals | Adobe Creative Cloud

    You can also view the available plans. Pricing and membership creative cloud plans | Adobe Creative Cloud

    Hope that answers your query.

    Concerning

    ~ David

Maybe you are looking for

  • Can I install Win XP on my Equium A200

    Hello world! I use my laptop at home and at work.It s running Windows Vista. At work, we are a server installed and said that my laptop could not connect properly under Vista. So I was wondering if I could put XP on it so and dualboot.

  • monitor turns off during use

    My monitor caution turn off while I use it, the screen flickers a bit sometimes. I bought my computer in February of this year.

  • Need help for upgrade R2 of Alienware x 51: card graphics, RAM, power supply

    Hi, about a year ago, I purchased the Alienware R2 x 51, and I want to improve. Im a bit new to this so I need help, so I came on the forums. Current form (these are the parts I want to improve): GeForce® GTX 745 with 4 GB of DDR3 memory 3.4 GHz Inte

  • Council art becomes square with zoom

    When you pinch zoom in draw for Adobe, the work becomes square. in Adobe sketch zoom is ok, now canvas aspect ratio. Seems to be a weird bug in the draw.

  • 1080 p/30 & 720 p/60 clips can hold properly on a sequence?

    I have a 1080 p/29.97 timeline and 1080/30 clamps and clips of 720/60. When I put the 720/60 clips on the timeline it's cropped and his cropped when exporting. Im trying to have 720 p/60 clips comes in with the rest of my video on my calendar correct