Question about the graphics driver

Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

-If I run dxdiag.exe it shows s/o under the view tab

-Graphics Card allegedly inside: Intel HD Graphics 4000

-J' tried installing the following but it says that my computer does not meet the minimum requirements:

Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

Data sheet:

If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy (compress)
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
Link to find out how to download below.
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
System specs are extremely useful then please include everything you know.

Blue screen view and that crashed are often wrong and should only be used in case of emergency...

Troubleshooting of Windows/source here
You can learn more about BSOD here
You will learn how to test your memory ici
An effective question gets help more quick read how here
Pilot auditor-stalking a GIS behave driver here

Tags: Windows

Similar Questions

  • Question about the graphics card of the Satellite P50t-B-108

    Hello

    I think to buy the Toshiba Satellite P50t-B-108 model.
    Can you tell me if this phone has some kind of graphic hibrid (he uses both the graphic processor Embedded Intel and AMD one?) or simply the radeon graphics processor?

    I need to install a linux distribution (I might go with ubuntu, but it's not important) and what I need to know is if the HDMI works...

    Thank you.

    Hello

    As far as I know the Satellite P50t-B-108 was equipped with the graphics card AMD Radeon R9 M265X.
    In addition the Intel® Core i7-4700HQ processor supports the Intel HD Graphics 4600
    This Intel HD 4600 graphics unit is part of the Intel CPU.

  • Re: Question about the display driver for Satellite L850

    So, I bought a Satellite L850 as twe weeks and I am yet to know which driver do I need.
    I mean, it's better is one that comes with Windows Update or do I need to download it myself? I can watch videos and play games pretty decently while I don't mind so far.

    > I mean, it's better is one that comes with Windows Update or do I need to download it myself?

    The Toshiba driver page driver is usually the right one. Updated the and designed for the use of the laptop.
    But if don t have problems even while playing the game, don t change. You know: never change a system running ;)

  • Question about the graphics card of Satellite P30 144

    Hello
    I have a Satellite P30-144 and I need to know if the graphics card is integrated to the motherboard or is separated.
    I play a lot of games online and you need to know if I need to go out and buy a new one, cause my graphics card does not work on the new moh airborne

    Ty for your help

    Colin

    Hi friend

    Sorry I have to tell you that it s not possible to update your computer with a new graphics from the vga chip is embedded on the motherboard.

    Almost ALL of the toshiba machines were "wired" so graphics card if you don t one machine of 30,000 dollars for weld and a LOT of know-how for reprogramming BIOS as the guys at toshiba @ Japan then take your thoughts on the upgrade of the VGA.

    If I were you I would upgrade my RAM instead or if you really want to play games with your machine then you can order this thing:

    http://tech.Yahoo.com/CES/null/11883

    Welcome them

  • Satellite P200-1BA - questions about the HARD drive RAM upgrade

    There is a 2nd internal HARD drive Bay, but not a female connector. Can I install it? How?
    There are 2 slots for RAM, all together 2 GB. Is it possible to exit an and instead place a token 2 GB to 3 GB total or should I always double channel pair RAM?

    It is not possible to install the second HARD drive. The laptop box is universal for all models P200, but some of them are delivered with 2 drives hard HDD upgrade is not possible.

    With the RAM modules, you can do what you want. To be more precise, YES! You can remove a 1 GB module and put 2 GB RAM. Please just use high quality Rams and not some products without name at low cost.

  • Update the graphic driver for Bootcamp 6.0 questions

    After you perform a new installation of Windows 10 1607, I proceeded to install Bootcamp AppleBcUpdate.exe drivers on my MacbookPro 11.5 i7 Dual Graphics.

    Everything worked fine after that restart once the installation has been done. Now I checked the Apple software update, and he gave me a few updates. Specifically the bottom three in the picture below.

    It restarted after that and then 'Apple Software Update' update itself twice before offering a new version of the graphics driver.

    This update has screwed up the system. Auto brightness doesn't work anymore. The brightness keys don't do anything. I reinstalled bootcamp on a fresh drive to isolate this problem.

    Does anyone have a solution to this? Any suggestions? If everyone Apple never bother reading this, then please test your drivers before you send them.

    Delete Windows, re - install, create a Windows system restore point, disable all updates Intel GPU and then apply the updates and test.

  • Satellite M60-176: cannot install the graphics driver

    Greetings,
    I'm trying to reinstall the original driver from Toshiba site
    on a satellite M60-176 disabled ATI X 700 256 MB dedicated

    version is:
    Driver VGA (ATI M24C/M26P)
    V8.121.050322a - 021880C
    Driver VGA (ATI M24C/M26P)

    The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

    When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

    I tried to follow the sequence as:
    uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

    I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

    TOSHIBA support put me to BIOS 1.60 level: same problem

    I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

    Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

    I'm really ask for help, because I do not know how...
    Kind regards
    Ludovic

    Hello

    What happens if you install the operating system from the Toshiba Recovery CD?
    This CD also contains the ATI graphics driver.
    How about installation of the graphics driver on the site omegadrivers.net?

    But I must say that it is very strange question. The driver from the Toshiba site should work.

  • A few questions about the Satellite A100 PSAANE

    Hi friends,

    I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
    Now, I have a few questions... I mention below: -.

    (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

    (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

    (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

    (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

    Please help me friends. Thanks in advance.

    Kind regards
    Perkins

    Hello

    Here, a few questions about the number:

    (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

    (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

    (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

    (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

    Welcome them

  • A few questions about the difference between the Satellite P70, L70, S70

    Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

    (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

    (3) all the three (P70, L70, S70 series) come with the same TFT panels?

    (4) of the above series, which supports mSata?

    (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

    (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

    (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

    Thank you in advance.

    > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

    (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
    As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

    I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

    (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
    See point 1). Different P70, L70, S70 models were equipped with different material parts.

    (> 4) of the series above, which takes in charge mSata?
    As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

    (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
    See point 4) not all models supports the same hardware specifications

    (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
    I don t think that SATA III is supported. I guess it would be SATA II

    (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
    Not easy to answer because there are too many models released in Europea.
    And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

  • Tecra M3 - BSOD if I install the graphics driver

    I bought a Tecra M3 about 4 years ago. He has recently started to give the BSOD.

    I started in safe mode, and it is fine. I uninstalled the graphics driver and rebooted and it works - just without the graphics driver. As soon as I reinstall the graphics driver it BSOD.

    I'm sure that the GPU/VRAM has a problem of 99.9%. Sometimes as the priming of the laptop there is a random corruption on the screen (before xp load).

    Of course, the GPU can be replaced without replacing the motherboard together. Replacement motherboard is 800AUD + 200AUD for install it.

    In the google search; I found many people with the same problem. Perfect condition laptop Tecra with dead graphics.

    The Qosmio is a reminder for the defective Nvidia GPU. The M3 has a Nvidia GPU. Why it can't be fixed too?

    Hello!

    BSOD code, you get exactly?
    Maybe the problem is a driver or a software problem.

    You try to install display drivers from Toshiba or Nvidia website?
    Have you tried reinstalling the laptop using the Toshiba Recovery disk?

    Sorry, but for the moment I can say more about it.

    Good bye

  • A few questions about the upgrade on Satellite A300-144

    Sorry for the typos, English is not my mother tongue.
    I want to ask some questions about the upgrade of a300-144.

    * Some info first.*

    CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
    Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

    * Questions.*

    1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

    3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

    > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
    If the FSB would allow support 667 MHz then the memory would also at this speed.

    > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
    The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

    > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

    It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
    But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

  • Question about the recovery partition

    Hello.

    I have a question about the recovery of HARD drive partition.

    If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

    I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

    Thank you.

    Hey Buddy,

    To be honest I n don't know what you mean exactly with this option to erase.

    In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

    In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

  • Portege M300 - update the graphics driver

    Hello

    I have starteg get random crashes while trying to open Word documents and others.

    The Microsoft Online Crash Analysis tells me that I should update my graphics driver. It is an Intel 82852/82855 GM/GME Graphics Controller and Intel homepage shows updates available. Intel also alert you that some manufacturers to customize this driver, so before chack updated.

    There is no update driver doesn't appear on the Tosh site.

    Question: Is it safe to update on the Intel site?

    Thank you, Richard

    Well, I checked the site Toshiba driver and the graphic driver for M300 was published on 28/01/05. The version was 6.14.103937.

    I read many comments here in the forum on the graphics drivers and it seems that generally it s advisable to use the graphics drivers from Toshiba but I think you can also try installing the Intel graphics driver.

  • Re: Several questions about the recovery of the Satellite L750 features

    I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

    (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

    (2) will be the recovery CD is exactly the same as the recovery on the system partition?

    (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

    (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

    (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

    Hello

    I'll try to provide answers:
    1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
    2 - Yes.
    3 - Yes.
    4 - No. Don t be confused with this.
    5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

    In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

    If you have any other questions you are welcome.

  • Question about the new Yoga 10 HD +.

    Hello

    A few questions about the new Yoga 10 HD + that I hope you can answer.

    I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

    • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
    • Can it read exFAT formatted microSD cards?
    • Anyone who has questions about the audio via bluetooth?
      (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

    So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

    While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

    My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

    Thanks in advance.

    EDIT:

    If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

    I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

    I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

Maybe you are looking for