Question about the move on CS5 tool

Similar Questions

• + - orientation on the move in CS5 tool

  I used Illustrator for a while now and one + measure has always been top-down in the vertical direction and + left and right - horizontal.

  In the vertical direction CS5 - now seems to be - until and + down which is the opposite.

  Is it a setting or a novelty?

  It is indeed a new parameter of CS5,

  However, you can try change it with as follows:

  Navigate to the folder:

  Adobe Illustrator CS5 Settings > en_US > Adobe Illustrator Prefs

  and edit this file with Text Edit.

  Two lines of text search: you can save on CS4 by editing the file AIPrefs, change these two lines:

  /isRulerOriginTopLeft 1-/isRulerOriginTopLeft 0

  and

  /isRulerIn4thQuad 1 /isRulerIn4thQuad 0

  See if its still the same.

  Kind regards.

• Re: Question about the Toshiba HDD Recovery tool

  Hello
  Quick question: if I burn a disc of recovery using 'Toshiba recovey media creator', if it burns a picture of the current state of the computer or if it burns an image of the HARD drive restorations (means a clean image)?
  I have a recovery disk in drive D but I want a backup on dvd disc.

  Thank you!

  Hello

  Not sure, I didn't create Toshiba Recovery disk, but I think it burns an image of HARD drive recovery. But I don't know, if you use a software, Acronis true image, you can burn the image to the current state of the computer.

• Questions about the movement of 1 of 3 ESXi4.1-ESXi5 host domain controllers.

  Is this environment that I have 3 2008 R2 domain controllers.

  1 physical

  2 virtual

  I want to turn off a virtual domain controller and move first host (ESXi 4.1) on second host (ESXi 5).

  My concern is that if the NETWORK card in the guest OS is going to get dirty with or it will remain as it is.

  If I remember not the mac address will indeed change (unless I hard coded it in the configuration file), but that shouldn't be a problem.

  I don't know, what if a new NETWORK card will appear in OS making old useless NIC originally invited me to change the network settings.  Something I don't want to have to do.  I know I've seen a similar problem with a VM linux before, but don't remember seen happen in a virtual Windows machine.  Just want to be sure before that I have to try.

  Thanks in advance for your comments.

  
  Greg

  VM migration between hosts will make any changes to the NIC or MAC address. You must ensure that the required networking is presented with two hosts if you want to move between them seamlessly. If the network tag is not the same between the hosts, then you will need to change the settings of the virtual machine and use the drop down to select the appropriate network before turning on the new host. But this should be easy and quick and without surprise.

  See you soon,.

  Jon

• Question about the tools Panel...

  I have a question about the Panel edge tools animate:

  In the future, edge animate will have a rich set of drawing tools? At the moment, so wanted to have a symbol, lets say a 'dog', I would have to draw everything first in Illustrator or Photoshop, and then import it into Edge animate (because EA basically allows me to draw rectangles and circles only). In future versions, will there be tools like 'Pen tool' or 'Gum' and other drawing tools know Flash Professional to create symbols?

  Thank you

  JH

  Hi JH,.

  Sorry, but we can't comment specifically about whether or when any functionality in the future versions of edge animate. What we can do, is listen to feedback from our users, and to add feature requests for the EA team who can be considered for future versions of edge animate.

  When new releases are published, there is also a list of the new features added... so stay tuned!

  Thank you

  Joe

• Question about the pen tool (w / photo inside)

  Hi all! I have a question about the pen tool. I think that this picture is very useful for my question:

  

  So in this pic is an orange rectangle, and within this rectangle is a blue strip. I would like the blue band surface perfectly (not too much and not covered) the edge of the rectangle. For example, on the lower end of the blue band, you can clearly see that the band does not extend quite far to the edge of the orange rectangle. At the top of the band, he's a little more (a little hard to see). I work with some complex shapes when you use the pen tool and it's really slow me down to compensate for over/under Forms. If she could just snap to the borders of the other forms that would make my life a lot easier. Thanks for reading and please help!

  Duplicate the orange shape and change the fill color to blue. Draw your new shape on that layer, using the Intersect option.

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Question about the purchase of policies in China for commercial purposes

  I have several questions about the purchase of policies. Our company is in CHINA

  1. we have our own product which has LCD display to display certain information with different languages (Chinese, English, German, French, Italian, Spanish, Portuguese and Russian). We need to use Adobe Heiti Std fonts for the Chinese language by commercial purposes. I tried this font in Adobe? Do Folio police 11.1, but is not in this library, your partner gold in China told me this font is part of Adobe Production Premium CS5.5, which we have already purchased from Adobe, it is used freely by the user.

  It is true that we can use the fonts Adobe Heiti Std freely and even for commercial purposes in many products?

  If this font is not free, how can I buy it for commercial purposes in many products? Could be he you pls tell me the person/company contact email or phone number.

  2. we need to use Eurostile LT font for the English language by commercial purposes as well. Is it Eurostile LT available for German, French, Italian, Spanish, Portuguese and Russian as well? and I can not find do Folio 11.1 as well. But some Eurostile Std * fonts appear in the list.

  Use font Eurostile LT? freely for user

  The police in the Adobe product package, but it is not in the Adobe typotheque (Adobe? Do Folio 11.1), then it can be used freely even for commercial purposes in many products?

  Thank you in advance.

  Unfortunately, none of these fonts is available for the user interface of the product. Although Adobe has two of them, we have not the right to sell OEM licenses or the other.