Question about the order of stop/f

Similar Questions

• A question about the order of the COIL and blank lines

  Hello everyone,
  
  
  
  I have a question on the order of the COIL. Here is the syntax of my sql script file

  HOST SET NLS_LANGUAGE=FRENCH_FRANCE.WE8MSWIN1252;
  SET SQLBLANKLINES ON;
  SET TRIMSPOOL ON;
  SET SERVEROUTPUT ON;
  SET LINESIZE 10000;
  SET PAGESIZE 10000;
  SET COLSEP '|';
  SET HEADING OFF;
  SET ECHO OFF;
  SET FEEDBACK OFF;
  SPOOL result.txt
  
  
  -- And here I write my sql queries.
  
  
  SPOOL OFF;

  It works quite well, and every time the script is run, the file ' * result.txt "* contains the result of the request." " However, whenever there is a blank line at the beginning of the file ' * result.txt* '. I don't know why this unwanted blank line is inserted automatically whenever I run my script. I have to delete manually (otherwise I have problems with my script Unix interpret these files) and as I have several files to update, this could be your time. Is it possible to get rid of this unwanted blank line?
  
  
  Thanks in advance,
  
  
  Kind regards
  Dariyoosh

  SET PAGESIZE 0;

• Question about the order of evaluation of the clause WHERE CLAUSE when the Oracle OF the syntax used to join tables

  Hello

  Oracle version: 11.1.0.7.0 - 64 bit

  I read the documentation online at joins. The page is avialable here: joins at

  My question is about the join order of evaluation of the conditions in clause and the conditions of those

  are not the join conditions and are placed in the WHERE clause.

  Consider the following pseudocode

  SELECT

  T1. Col1,

  T2.Col1

  Of

  Table1 t1 LEFT OUTER JOIN table2 t2

  WE

  (condition_expression1)

  WHERE

  (condition_expression2)

  Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article?

  Thanks in advance,

  Hello

  dariyoosh wrote:

  Hello

  Oracle version: 11.1.0.7.0 - 64 bit

  I read the documentation online at joins. The page is avialable here: joins at

  My question is about the join order of evaluation of the conditions in clause and the conditions of those

  are not the join conditions and are placed in the WHERE clause.

  Consider the following pseudocode

  SELECT

  T1. Col1,

  T2.Col1

  Of

  Table1 t1 LEFT OUTER JOIN table2 t2

  WE

  (condition_expression1)

  WHERE

  (condition_expression2)

  Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article? ...

  The reverse is actually closer to the truth, but we can't really make general statements like that.

  SQL is not a language of the proceedings.  Looking at the code SQL, we could say that the code does, but we cannot say much about how that code it.  In other words, SQL is a language that describes the results you get, not the way to get them.

  The optimizer will do everything what he thinks is faster if it does not change the results.  If any order in which they are applied (in outer joins or CONNECT BY queries, for example), then think of the join is done first, and the value of the WHERE clause is applied to the result of the join.

  Here is a query looks very much like you posted:

  SELECT d.deptno

  e.ename, e.sal

  OF scott.dept d

  LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno

  WHERE e.sal > = 3000

  ORDER BY d.deptno

  ;

  Output:

  DEPTNO ENAME SAL

  ---------- ---------- ----------

  10 KING 5000

  20 FORD 3000

  20 3000 SCOTT

  The scott.dept table contains deptnos 30 and 40; Why are they not in the result set?  The query behaves as if the outer join is made first (production 15 rows), then the WHERE clause has been applied.  All lines with deptno = 30 had sals down han 3000 and all single line with deptno = 40 was NULL in the sal column, then these lines are excluded (as well as other lines of deptnos 10 and 20), and only 3 lines above are left.

• A question about the order of COLUMN sqlplus and PL/SQL

  Hello everyone.
  
  
  
  I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
  

  COLUMN market FORMAT a20

  That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.
  
  Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
  
  For those interested, here is the Oracle documentation page that I found (example 8)
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
  
  If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
  

  FOR colIndex in 1 .. numberOfColumns LOOP
          currentColumnName = getColumnName(tableDescriptionObject, colIndex);
          currentColumnLength = getColumnLength(tableDescriptionObject, colIndex);
          
          COLUMN  currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed.
  
  END LOOP;

  I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?
  
  
  Thanks in advance,
  Dariyoosh

  Hi, Dariyoosh,

  Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
  PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.

  The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).

• A question about the REEL in sqlplus command

  Hi all
  
  
  I have a question about the order of the COIL and I would be grateful if you could kindly give me a helping hand. Consider the following sql script.
  

  SPOOL result.txt
  SELECT * FROM mytable;
  SPOOL OFF;

  It works pretty well, and all the contents of the table "MyTable" is exported to the textfile "result.txt". However, sqlplus also prints the number of lines
  Print after each query. So after you run this script, the end of the file, I always have a line like
  

  ...
  "20541 lines returned"

  How can I avoid this line (the number of returned rows) in my output file?
  
  
  Thanks in advance,
  Dariyoosh

  Type this command prior to winding.

  set feedback off
  

  Kind regards
  Prazy

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• Question about the need to connect every 30 days...

  I understand the need for CC programs to connect to license Adobe servers, every 30 days (or it's 99, since I have an annual license?) of re - check license status.  That said, I have a question about the timing of these connections the licence renewal.

  What happens if I happen to be disconnected so far here 30?

  With the help of Microsoft for example...  I need Visual Studio to reactivate my developers license every 30 days in order for me to develop applications Windows 8 'metro '.  If I happen to be disconnected so far here 30, I am unable to work on any apps 'metro' until I got online.  (And I don't see any way to tell him to reactivate at the beginning).

  What happens with Adobe CC?

  Suppose I have license, and I am online for 29 days.  Then, the 30th day, I find myself be in offline mode when I start one of the programs of CC.  Now what?  Does the 30-day clock 'reset' every now and then during this time, or is it really only try every 30 days, and I have to be online on that day?

  Hi kenbrody,

  Please see the thread: http://forums.adobe.com/thread/1190831 .

  Kind regards

  Romit Sinha

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Questions about the accordion component

  I have a few questions about the use of the accordion component:
  
  1. when my accordion is created it shows the first container child, this child is created at this time and if you go to another child it is also created (but only until it is first accesed). The thing in the first child, I need to access the properties and components located in other children, so it marks an exception to NULL, because I am trying to access the properties or the components that have not yet been created, but I really need to access and transmit values to other children containers at the moment (without their first navigation) , then it is possible to create all the children while creating the accordion although I would'nt need to navigate through its children to create them?
  
  2. is it possible to disable the functions of click of an accordion, so the only way to change bewteen her children is programmatically? I mean, you can click the buttons on the accordion to navigate through his children, but you can also do this programmatically by using the selectedIndex property, so I'll try to disable accordion buttons so the only way to navigate is programmatically.
  
  All the ideas of these two questions?
  

  You can use creationPolicy = "all" on the accordion and it will create all children, not only the first condition. The downside of this is that your application will have a little more time to start. Consider this:

  Child 2:
  

  If you try to set child2.input = 'something', a better solution would be to use data binding:

  Child 2:
  [Bindable] public var inputValue:String;
  

  Now you can do: child2.inputValue = 'something '; If the user interface of child2 have not been created, the inputValue parameter has without adverse consequences; as soon as the 2 child controls are created, data binding will assign the value. If child 2 has already been created, the data binding will also affect the value.

  You can disable the click event to the accordion by intercept and stop its spread, but you must do this in ActionScript, you can't do this in MXML.

  myAccordion.addEventListener ('change', accHandler, true); true means to use the capture phase

  private void accHandler (event:flash.events.Event): void
  {
  If (event.target is mx.containers.accordionClasses.AccordionHeader) {}
  Event.stopImmediatePropagation;
  }
  }

  The idea is that intercept you the click event, as it moves down through the components (capture phase). If the target of the event is an AccordionHeader, prevent you the event to go further - it is to reach the AccordionHeader itself.

  You can put this handler on accordion or its parent up to the Application.

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU