Question about the temperature of the CPU on Satellite A300D - 21 d

Satellite A300D laptop - 21 d. Average CPU temperature is less than 80 c even at low loads. Is this normal?

> Average CPU temperature is lower than 80 c, even at low loads. Is this normal?

No, it is not normal to reduced load. For example, mine is 40 - 45 c. You should try to clean:

http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

Tags: Toshiba

Similar Questions

  • A few questions about the upgrade on Satellite A300-144

    Sorry for the typos, English is not my mother tongue.
    I want to ask some questions about the upgrade of a300-144.

    * Some info first.*

    CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
    Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

    * Questions.*

    1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

    3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

    > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

    The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
    If the FSB would allow support 667 MHz then the memory would also at this speed.

    > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
    The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

    > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

    It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
    But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

  • Satellite A30 - question about the CPU temperature

    Hi all

    I have a Satellite A30 (model name: SA30-151, model number: PSA33E). I had the usual problems with overheating and closing, where I had to clean the radiator.

    My question is, how hot the CPU must sit at and what temperature is dangerous?

    I installed 'Hardware sensors Monitor' and the average temperature is about 55 c, but I saw it happen at 70 c when I'm pushing it.

    I was not able to find something on the net about it and I can't find information on the Toshiba site.

    Any help or advice would be appreciated, thanks...

    The same temperature is on my Tecra M1. Believe me, there's really no reason to panic.

  • Satellite L40 - question about the CPU temperature

    Hello

    I have a Toshiba Satellite L40 17 Q with Intel Celeron M CPU.

    The usual device temperature is about 60 degrees Celsius. I read that the Tj to this type of processors is 100 degrees Celsius.

    So my question is dedicated to the owners of laptops equipped with Intel Celeron M processors and of course for the hardware gurus.
    Is the operative temperature of 60 degrees Celsius of normal, and if not how do I decrease.
    My laptop is new and I make sure that the air flow openings are not jammed.

    Thank you in advance!

    Hello

    Don't worry, the CPU temperature. 60 degrees Celsius is certainly within the normal range, and there is no reason to worry about this. On my laptop Tecra, I noticed the temperature CPU about 62 degrees Celsius and drive HARD around 40 degrees Celsius.

  • Satellite L850-046 - question about the CPU temperature

    Hi Experts,

    I bought the Toshiba laptop 9 months ago, but now notice the temperature warms. I check the software Toshiba Health Monitor and the CPU temperature range of 46 to 53%, fan speed 50%-63%.

    Is - this normal readings?

    I am now using a desk fan pointing in the vents hoping that additional traffic can maintain better temperatures.

    What would be the ideal and the overheating of the readings to look out for.

    Thank you very much

    Because cell phone use for 9 months, I recommend you to clean the cooling fans.
    The fact is that from time to time the dust and debris that may affect the performance of the cooling fans, and this could lead to a higher temperature.

    I clean my fans from time to time using a jet of compressed air.
    It helps to get rid of dust and to lower the temperature.

  • Question about the CPU load and memory...

    Hello. I'm a South Korea network engineer.

    I am facing a problem with the DMP 4400.

    I made a web page to publish the DMP 4400, but she loading has been so slow.

    I don't know why it slows down, but it may be because of the memory or cpu.

    So, I need to check the CPU and the memory usage...

    is there anyone know control order CPU and memory?

    I searched documents and web site include Cisco, but I couldn't know.

    Jinsung salvation,

    This should give you the amount of memory on the device:

    https://:@:7777/get_param?p=sinfo.memory

    It should I think give you the CPU:

    https://:@:7777/get_param?p=sinfo.load

    Kind regards

    Nicolas

  • Question about the partitions on satellite Pro L300-164

    I have a Toshiba Satellite Pro L300 and it came with vista on the 1 74 GB partition and a data partition 73 GB but it has a folder called HARD drive recovery, but I want Vista to all of the 140 gb and have the recovery partition on a small partition of 4 GB for HARD drive recovery.

    Is this possible without mucking up the HARD drive recovery?

    No, is not possible, but that you can and should do is create recovery DVDs.
    After doing this, you can remove this folder and organize partition how you want it to be.
    Remember that you will lose the ability to install the operating system from the disk using F8 and repair my computer option.

    If a problem occurs, you can install Vista using this recovery DVDs.
    Please note: after installation of recovery, you will have the same structure divides again and all your saved data will be gone.

  • Question about the SafeMode on Satellite A100

    How can I reboot my system to reboot safe mode. It seems to be a virus that prevents me from starting if I need to restore to an earlier date.

    You can restart it in safe mode by pressing the "F8" key until the Windows Startup logo appears. After pressing F8, a menu will follow where you can choose the method of priming.

    There, you can decide if you want to start in safe mode or to restore your system to a previous restore point.

    Welcome them

  • Re: Several questions about the recovery of the Satellite L750 features

    I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

    (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

    (2) will be the recovery CD is exactly the same as the recovery on the system partition?

    (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

    (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

    (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

    Hello

    I'll try to provide answers:
    1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
    2 - Yes.
    3 - Yes.
    4 - No. Don t be confused with this.
    5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

    In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

    If you have any other questions you are welcome.

  • A question about the virtual processors in the prompt

    Dear Sir

    I have a general question about the number of virtual processors in the guest system.

    I use VMware ESXi 4.0.

    Say if my physical host has only 2 cups carrots (with or without HT should be the same), then is - it true that I can only attribute 2 virtual processors per virtual machine?

    Is it possible to give 4, 8 virtual processors in virtual machines?

    In my drop down menu I can NOT choose more than 2 virtual processors per virtual machine, I want to just make sure that it is not the problem of license.

    Thank you very much.

    Nanfang

    Hi Nanfang,

    linanfang wrote:

    So the general rule is the number of vcpus don't CAN NEVER exceed the number of physical processors. Is this correct?

    Replace "physical cpu" by "physical cores" and you are right, because a vCPU is mapped to a kernel. For example, you can assign 4 vCPU with a Quad-Core processor.

    If you think about it, it makes perfect sense. If you would be able to map 2 vCPU to the base, the vCPUs had to wait for them all the time because the physical kernel can simply perform an action at a time, why you would decrease the performance of your virtual machine by setting 2 vCPUs.

    It is not changed in vSphere 5.

    Concerning

  • A few questions about the difference between the Satellite P70, L70, S70

    Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

    (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

    (3) all the three (P70, L70, S70 series) come with the same TFT panels?

    (4) of the above series, which supports mSata?

    (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

    (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

    (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

    Thank you in advance.

    > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

    What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

    (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
    As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

    I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

    (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
    See point 1). Different P70, L70, S70 models were equipped with different material parts.

    (> 4) of the series above, which takes in charge mSata?
    As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

    (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
    See point 4) not all models supports the same hardware specifications

    (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
    I don t think that SATA III is supported. I guess it would be SATA II

    (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
    Not easy to answer because there are too many models released in Europea.
    And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

  • Question about the recovery partition

    Hello.

    I have a question about the recovery of HARD drive partition.

    If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

    I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

    Thank you.

    Hey Buddy,

    To be honest I n don't know what you mean exactly with this option to erase.

    In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

    In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

  • A few questions about the Satellite A100 PSAANE

    Hi friends,

    I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
    Now, I have a few questions... I mention below: -.

    (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

    (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

    (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

    (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

    Please help me friends. Thanks in advance.

    Kind regards
    Perkins

    Hello

    Here, a few questions about the number:

    (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

    (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

    (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

    (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

    Welcome them

  • Question about the new Yoga 10 HD +.

    Hello

    A few questions about the new Yoga 10 HD + that I hope you can answer.

    I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

    • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
    • Can it read exFAT formatted microSD cards?
    • Anyone who has questions about the audio via bluetooth?
      (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

    So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

    While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

    My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

    Thanks in advance.

    EDIT:

    If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

    I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

    I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

  • I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

    I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

    Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

Maybe you are looking for