Question about the USB wireless adapter for Windows XP

Similar Questions

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Confusion about the development of applications for windows surface surface Pro and Windows for windows rt...

  Hello guys... I want to launch an application... for surface... but the confusion I got... is one of main surface contain windows rt and pro version contain windows 8. for pro, I'm fine with the update, but for windows version rt... made the project 2012 VS for windows... like in the pro version... (same project will work or not)... or I do VS 2012 project for windows phone...

  Hello

  Please post your question in the MSDN forum.

  MSDN

  http://social.msdn.Microsoft.com/forums/en-us/home

  I hope this helps.

• A few questions about the USB DVB - T (DTT) PX1211E-1TVD Tuner

  Hello

  Recently, I saw the USB DVB - T (DTT) Tuner part number: PX1211E-1TVD announced on this site. It seems very initiative but I wanted to clarify the features actually described on the site, because it is not very clear...

  1. Why is there a USB DVB - T TV tuner with antenna stand alone mini and an antenna adapter fixed and why are two here?

  2. when he talks about free-to-view DVB - T compatible? I understand this means that you can watch tv on your laptop, but you can also watch TV and if fed channel through your laptop as well? It would be the same as watching TV through a cable NTL/SKY or BT Vision, which is a service of freeview TV and talk BT.

  I look forward to your help.
  Thank you in advance.

  Hello

  1.) this USB DVB - T tuner lets you receive digital television signals.
  The key can be used in the laptop to laptop, but also with the desktop PC.
  Can happen sometimes that the digital signal cannot be received across the House with the same performance.
  Therefore, you can place the second tiny antenna in the area where the signal is stronger IE. near the window

  (2.) the TNT channels has nothing to with pay TV, or else not received free channels.
  I put t know where you come from, but in many countries European, analog TV is not far and the Dvb - T is a follower.
  This means that you can receive the same and for most TV stations more like before on the way analog.

• Wireless adapter for Windows 7 on 15-e180nr

  Recently, I switched from Windows 8 for Windows 7 Home Premium (64-bit) on my Pavilion and finds it difficult to get the driver for the adapter wireless for it. System recovery is not good, and I've already tried three different drivers:

  sp54972, sp57538 and sp56154.

  The problem is when I go into devices to see the network map, information is "unknown", so I have no idea of what the manufacturer-specific device / I'm still in trouble. Can someone help me figure out what driver to use? I got the ethernet, but really need wireless work.

  Model: 15-E180NR
  Product: E8B21UAR #ABA

  OS: Windows 7 Home Premium 64-bit

  Thank you!

  Hello:

  According to the list of parts below...

  http://PartSurfer.HP.com/search.aspx?SearchText=E8B21UAR

  You need this card wireless driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_134477_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

  Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

  Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Question about the Y510 AHCI drivers for install XP

  NiHao Lenovo Forum,

  I am a proud owner of your IdeaPad Y510. I just wanted to ask what the web page offers Lenovo the AHCI storage driver to activate the storage controller SATA on the motherboard for my laptop Lenovo IdeaPad Y510?

  I ask because Y510 as many users who install the XP will need to have these storage SATA controller drivers if they want to support higher speeds, hot plug and native command queuing (NCQ).

  I see that Lenovo provides the following AHCI drivers for ThinkPad found here:

  www-307.IBM.com/PC/support/site.WSS/MIGR-62909.html

  Also, it would be useful to let everyone know that Lenovo Y510 models come with what advice system that they have, with regard to the necessary SATA AHCI Controller driver for them.

  I see the ThinkPad models use Intel 82801GBM SATA AHCI Controller or Intel 82801HEM/HBM SATA AHCI Controller as indicated above from the URL.

  How can I check my Y510 to know what Intel SATA AHCI Controller is necessary here?

  Some clarification would be useful. Thanks in advance for any help and assistance here.

  Also another method here would not create an installation with the Intel Matrix Storage Manager drivers slipstreamed XP disc? And how does a person know which of the many Intel Matrix Storage Manager drivers should be slipstreamed to the pilot Y510 AHCI SATA Controller here?

  And how many different models of Lenovo Y510 uses different system boards? Think there are at least two, because some have been announced with a FSB 800 MHz right?

  Thanks for any help and support here in advance.

  Read the FAQ some might answer your questions.
  Also, I suggest that different motherboards are in different models, as I said there are even different colors - green and Brown motherboards there. Brown, I saw myself - those who are ASUS, green are unknown for me.
  Then, NCQ is not a feature of driver software. It is a material of HARD drive capacity to optimize movement traectory leaders to speed up the read/write process. So, no driver is required to activate. This work iven in the BACK.
  AHCI driver is inside driver chipset. Also, you can integrate it. Please, read the FAQ .
  HTH

• General questions about the system reserve partition in windows 7 and 8

  Hello

  1. is the partition of the system 100 MB in windows 7 hard disk is to use system restore?

  2 - on the track of the first hard disk that 100 MB partition holds system resides?

  3. in windows 8 wat happened with this partition of booking sytem 100 MB and where it is located on the hard drive?

  Thank you

  Johan

  Hello

  1. is the partition of the system 100 MB in windows 7 hard disk is to use system restore?

  2 - on the track of the first hard disk that 100 MB partition holds system resides?

  3. in windows 8 wat happened with this partition of booking sytem 100 MB and where it is located on the hard drive?

  Thank you

  Johan

  It should appear as disk 0

  This is for the Windows recovery environment (WinRE), also supplied with Windows Vista, only it has been available from the Windows Vista installation disc only, although some manufacturers make available on a partition separated on their factory facilities. In Windows 7, this feature is installed on all computers and is stored in the 200 MB partition if you are installing using a single partition scheme. However, if you are installing to a drive that has more than one partition, the recovery environment is stored in a folder at the root of your installation disc, so if you install to a partition with a label of C:\ she will be C:\Recovery.

• A general question about the stylesheet XSL - FO for BI Publisher

  Hello
  Of BI Publisher MS Word Add-in, there is a menu item that allows users to export my. Model RTF as an XSL - FO stylesheet. This provide great flexibility to users so that they can implement the most comprehensive features/features, which are not covered by keys/menus of Word Add-in, on their report. Now my question, how can reuse us this XSL - FO file (.) XML) when we finished editing on this subject? I tried to use the web client BEEP to download as a template of report TONE repository file, but it doesn't seem to work. Could someone give me an idea of this? There must be a way to deploy the XSL - FO stylesheet for model data BEEP otherwise, the item of menu "export" in word add-in becomes meaningless.
  Thank you very much.

  Just download the files you said.

  and click the new button at the top, it will create a new model with the name "new model".
  You have to assign one of the template you downloaded for this report. in this, there is an option as 'TYPE '.

  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e10416/pptoutput.htm

• Questions about the standard wireless keyboard and mouse on a h8 - 1360 t.

  Hi again,

  I have a h8 - 1360t with the standard wireless keyboard and mouse.

  1. where is information on the blue buttons 'connect' keyboard and mouse?

  2. the mouse has a power switch - do I really have to close each time, or is there a function of inactivity when the system is off?

  3 lets say that I have two exact systems within 5 feet of each other. Will the two keyboards and mouse conflict?

  Looking forward to your answers.

  Thank you

  BJ

  This document will show you how to sync mouse wireless and keyboard if they connect buttons.

  You don't need to turn off the wireless mouse. If you have problems with the batteries run out frequently, it might be useful, but I've never needed to do.

  Two different sets of wireless mice/keyboards are not usually a problem. If there is a conflict, go through the process of connection of each game.

• A question about the size of Swap for Oracle 11.2

  Hello everyone
  
  I want to install Oracle Rac 11.2 on 2 Server with 22 GB of RAM each.
  
  Reading Exchange according to the requirements of the Infrastructure of grid for Linux, I found this:
  
  Between 1 and 2 GB-> 1.5 times the size of RAM
  Between 2 GB and 16 GB-> equal to the size of RAM
  More than 16 GB--> 16 GB
  
  The requirements of database for Linux 86_64 of reading:
  Between 4 and 8 GB-> 2 times the size of RAM
  Between 8 and 32 GB-> 1.5 times the size of RAM
  Over 32 GB--> 32 GB
  
  
  Then, with 22 GB, follow the requirements grid: 16 GB and database requirements: 33 GB
  
  Should what size I get?
  
  Thank you very much

  This is how I read it.

  Best regards

  mseberg

• Question about the universal power adapter car for Satellite U500

  There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
  These units have a reputation of reliability or security for the laptop or are they to be avoided?

  Hello

  The problem is that in most cases these s universal adapter takes care of different intensity values
  You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

  I would not recommend these universal adapters because the laptop needs some value ampere
  I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

  Get in touch with the local ASP to get such part

• A question about the program of paint on Windows 7

  I used old paint in Windows XP, hundreds of times, I've now updated for Win 7 and I am very disappointed in the new version of paint.
  In short, yes it has some new features, but generally he went back, big time.

  Let me explain.

  In the past, let's say you want to draw an object, a certain color, with Win XP, you just select a color and draw your object, now there's all this color 1, color 2. Yes, you can always get what you want to do, but it is much more tedious, much less intuitive.

  Another problem, the undo function (a very common tool) is hidden in one of the menus, you must drag to your command bar, even with the zoom in, Zoom out, yes they are there, but hidden away. WHY?

  A big, big problem in the system of color fill. In the past opens a GIF, say you had a large surface area, and it was all the one-colour, with a click, you can change the color. Try this in Windows 7, and when you save the image as a GIF file, you get all the grainy areas

  With granular fill means that the color cannot be changed again. (except everything clear and re - fill which is darn time consuing, or save the image under a 256 color bitmap. The problem with bitmap, is there a huge file to GIF format size. NOT HAPPY

  In addition, the Eraser button. On Win XP, it was white, nice and simple. Now, he must tinker with what color you want the eraser to be square. Much more complicated, why don't you just have another gum that is always set to white? Have 2 erasers. Much less intuitive, much more tedious.

  In Win XP paint, want to resize something, it was easy to say tilt Thexaxis say 150 percent, but the axis is left unchanged. Now it's more complicated. They are locked in. I'm sure you can tinker and it immutable, but it's not simple and easy, much harder to do.

  My overall impression of the new paint 7 win, is that it is much more tedious and much less intuitive to use. NOT HAPPY.
  Yes, with practice I can work around probably many bad features, but probably it will take a lot of tweaking.
  It's more complicated and much less easy to use.

  This leaves still not resolved the fill color on a GIF chart feature. For example, suppose that you draw a hollow black square, depending on whether you fill the inside a color (XP there was about 16 colors or you could flood, perhaps more.) when you have saved the GIF image once again, the picture was clear and the embanked area was perfectly monochromatic. This allowed low size and the ability to change the color, if you want to. EASY.

  Try to do this in Win 7 paint, and the embanked area is grainy, when you save it. Even if you save the file as a GIF file as soon as you start. WHY SE PRODUCT. In win XP paint, I would start a new image and before I started one line, I would and then save it as a GIF, in this way when I recorded it again, all solid colors in areas would be unchanged. Does not work with Win 7 paint.

  Seems I have to get my old PC works again and use the XP on it to make my images.
  Side, I have made hundreds of sketches on Win XP Paint and know how to use so extremely well.

  There is another paint program, you might find useful:

  Paint.NET
  http://www.getpaint.NET/features.html

  Download Paint.NET
  http://www.dotPDN.com/downloads/PDN.html
  (left, click on the link to the right... 'Free Download Now')
  Paint.net tutorials
  http://www.eecs.wsu.edu/paint.NET/doc/2.6/help/en/tutorials.html
  (tutorial links in the left column)

• A few questions about the sketch in Photoshop for iPad

  Hello

  I think to buy an iPad to use Photoshop sketch, since its compatible later with Photoshop on my desktop, but I have some questions that I hope someone here will know

  (1) do we have layers? If so, there is a maximum number that we can add?
  (2) we have the maximum number of disguise? (Canvas size)
  (3) can use us the color picker?

  I was thinking about surface 3 pro, but good it will be very expensive, so I came to this alternative! My goal is to shoot my Tablet and then if I want to be able to finish on my computer, but I have the basic features of Photoshop on my iPad. Thank you very much for your answers.

  Tiago

  Hi Tiago!

  the current short answer

  (1) No, sketch has no layer. Draw which is a similar application has layers. The two send to photoshop

  (2) to outline the size of the canvas are the dimensions in pixels of the iPad (2048 x 1536) when you make a shipment to Photoshop

  (3) Yes it is possible

  my penny. Download the two: draw the sketch to Photoshop, Illustrator. In: Photoshop, combine, and brush. You will use all the