Question about the video capabilities of MacBook Pro

Similar Questions

• Question about importing video footage in Premiere Pro

  I'm new to Premiere Pro and have a question about it. I need to move all my videos on my new computer (Windows) from my old computer (iMac running iMovie). Where should I store my images so I can access inside Premiere Pro? I just need to store everything on a hard drive, and then create inside Premiere Pro projects when I need to import images in, or should I create a 'library' to store all my movies in? Setup bridge would be another beneficial way to view my videos (I use Lightroom for my photo library)? I'm just trying to discern the way I need to store and organize everything in order to get started with Premiere Pro. Thank you!

  Premiere Pro has no capability of database for the media in general, only in a specific project. 'Import' is not like in Lightroom, it does in PrPro is tell her where to look for the media while working on this specific project.

  So... you need create your materials on a particular disc, presented in a way that you can find them in a folder structure you design.

  A typical use of PrPro spreads parts on several disks. OS/programs on the system drive, a disk each cache PrPro & cache of database files; preview files; and project files. Media probably on another drive and exports on a final drive.

  Access the disk cache & cache database files, preview files and project files are the two ways of reading & writing, in addition to being constant. Multimedia files are used unalterable and exports only Scripture, their connections can be a little less robust.

• A few Questions about the videos on my Sansa Fuze

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  Rocket-4-Life says:

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  OK two records don't matter to you. SMC (or any other program) place the files in there, so you don't need to worry. VOB files are not compatible with SMC, so when you rip the DVD, you must use a program like Any-Video-Converter to create an AVI file or a mpge (my recommendations). Rhapsody will also add videos to the "rocket" as well.

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• A few questions about the video control integrated

  I'm preparing a booklet with lots of embedded videos. I have found that Acrobat does very well integrated and reliable video. The videos are large physical size, so they are activated from a small thumbnail and run in a window. The documents that I've done in the past have had only one item on a page and I put the music to turn off when the current page is not visible. Some videos are more than a minute if the player is moving another page while the video is running the clip window disappears.

  The brochure requires several video clips per page, so I need to make it easy for the user to close a window clip with what they have done. Any settings window that I use to clip the Windows Close button (upper-right) is very small, and I fear readers don't notice or have trouble using. The options 'Disable when' in the video edit dialog box are very limited, ideally I want a turn off when the user clicks anywhere outside the clip window, because it is not possible, I'm looking for an alternative. I have considered the following, but it seems that none of them are possible or practical:

  Dedicated 'Close video' button there appears to be no command available in the buttons of the user to do.

  Put all the clips on their own dedicated page and when the user clicks on the "clip" icon, it navigates to the clip video page which as a «back "button that navigates back.» It would only work reliably if the user is obliged to use the documents page navigation and prevented from using the acrobat page navigation. Even if you disable the display of the acrobat navigation buttons, it still meets the arrows on the keyboard.

  Any suggestions?

  Also when I embed the clip I draw a small rectangle and use 'recover media poster' sometimes, it puts a small "play"icon on the poster and, sometimes, it is not, it is not clear to me how to control this.»

  Thank you very much

  Murray

  Please Watch my tutorial on the AUC, which covers this idea of the 'thumbnail' using a decorative script button, so click on it opens the video and clicking it rejects the new. Scan at 7:30 if you are in a hurry.

  The icon of a poster frame is inserted by Acrobat when the image of the poster is created by the media, but if you add your own image of the poster, is not. In a few rare cases, it may not added, but we cannot reproduce this effect in tests.

• Question about the common Modules on Satellite Pro A60

  HI - first post!

  Looks like it's a bit a 'common' (see what I did there;)... too bad..) fault - but what driver file has these "common modules"? There is nothing in the list for the A60 Pro Sat that says "common Modules".

  Can someone point me in the right direction? Or is it just a case that they've got to be in the order of some? Will I have to uninstall all then repeat? Can I ask more questions?

  Thank you very much in advance,
  Phill

  Hello Phil

  Common modules is a kind of base for the other Toshiba application designed tools and utilities, and it must be preinstalled in a first time. Is very important that the common modules is not available for each laptop model. Why is that I can't tell you.

  I checked Toshiba download page and I didn t find listed common modules for your device, but I found the instructions facilities document. If you want to install the operating system on your own please install things in the right order.

  If you have any other questions, please write again.

  Good bye

• Questions about the video card upgrade

  I have a t HPE-310 (CTO) with an Intel i7 processor and an AMD/ATI HD5450 graphics card.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4242292&CC=CA&DLC=en&LC=en&JumpID=reg_R1002_USEN _...

  I want to upgrade the graphics card to better manage the Guild Wars 2.

  I am looking to buy an AMD/ATI HD6850 and a CS600 Corsair for power.

  Is this a reasonable combination for my computer? Are there other combinations you would sugget instead?

  Also, there are other problems, I need to be careful?

  SteveW44,

  If you meant the CX600 Corsair, I anticipate no problems. Enjoy!

• How to correct striping of the questions about the videos?

  I have some images taken with a canon 6 d camera.  Screenshot of one of them shows that there is an interlacing problem.  Is it possible to fix it first?

  John

  Top Yes means first interlaced.

  Go back to the original film, if you can and make a corresponding sequence in the first.

• Why the fan on my macbook pro continue to run at a fast pace for long periods?

  The MacBook Pro mid-2010

  OS X El Capitan, 10.11.3 version

  Processor: 2.4 GHz Intel Core 2 duo

  Memory: 4 GB 1067 MHz DDR3

  Graphics card: NVIDIA GeForce 320 M 256 MB

  163 GB available

  iWorks ' 09 has been upgraded to the latest versions

  No new upgrade is available for the system.

  My Question: Why the fan on my macbook pro continues to run at a fast pace for long periods?

  I guess that the fan runs constantly, because the CPU is working at a high rate. I rebooted several times but without any resolution systems. At the bottom of the computer is very hot at times so place the laptop on an object that allows good air circulation. This problem occurs intermittently every few weeks or more. I wonder if it is downloading an important upgrade, do a scan of viruses, or by working as a bot. Lights for hours. Currently, I estimate that it has worked rapidly to possible 6 hours. Thank you.

  It will usually be to dissipate internal heat from running resource intensive applications.

  Download and install a temperature/speed control application.

  Open the activity monitor all THE PROCESSES and CPU to display values between high and low.

  When the fan speeds up, post pictures of both for review.

  Also run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Questions new installation HD SSD for MacBook Pro

  I followed the online instructions how to install the SSD for my MacBook Pro. I then rebooted by Mac in recovery mode and formatted the drive in Mac OS extended (journaled). It was a little bit tricky message sometimes giving such as erasure of disk failures, but eventually it worked. I selected to install the OS on this HD. The image of the OS were first shown on OS X Lion, but my current OS is El Capitan. I just figured that he was installing the original operating system provided with the mac. The installation went well but then we he had finished wen timer back to 1 hour, 46 minutes. He made several times and after 6 hours, I decided to leave and start over. The second time after erasing HD and formatting again the OS that came was El Capitan for installation so I continued. This time, the installation has been completed and at the end says "OS could not be installed on my computer, reboot and try again." On the third attempt has received a similar message from the failed to install ' year error occurred during extraction of the files in the package "Essentials.pkg." " »

  Anyone has any idea why this doesn't work or suggestions please?

  About 2 months ago I reformatted my HD original as installed latest OS El Capitan as the mac has been slow. Does have a report with questions I get on doing the same thing with another HD?

  What model of MacBook Pro?

  Which SSD model?

  You have another Mac?

  Possible causes:

  -Incompatibility of your Mac with this specific SSD. Recently, some users have reported what appears to be these incompatibilities

  -You damaged the cable flex between the drive and the system board.  It is a common problem and causes intermittent problems initially and if it's even worse the Mac will see is even more disk

  -You have an another hardware problem as RAM bad or other component.

  I'd do it

  -Run Apple Hardware Test

  Using Apple Hardware Test - Apple Support

  -Connect an external drive and install OSX on this disc and boot from this facility and see if you have any problems

  -If you have another Mac download a compatible OS x Installer for the Mac App Store and create a USB bootable using device

  http://liondiskmaker.com/

  and install OSX on the SSD.

  This is the Office Mac Pro forum. I asked that your post moved to the appropriate forum.

• How to optimize the battery in my MacBook Pro?

  Hey,.

  I just bought a new MacBook Pro 2015 13 inches and I love it so far! Mainly, I bought it for use at the University since I am a student in Architecture and I was told that the MacBook Pro are great for this.

  Anyway, as I always take careful care of my business, I want to know how to maximize the battery in my MacBook Pro? Is it true that whenever I have my MacBook Pro connected to the charger and it reaches the max (100%), the charger stops charging? Also, should I turn off or put to sleep when I'm not using it?

  I have read online some tips, but I want to just make sure that all of its clear. I have a lot of questions to be honest, but if someone can give a brief explanation I would really appreciate it!

  Thanks in advance.

  Hi Josetroti:

  When you leave your MacBook Pro is plugged, it stops to load automatically when it reaches 100%. There's no need to unplug it.

  I turn on my Macbook Pro in the morning and left running unless I'm going out for a few hours in this case, I if it turned off.

  In the night I turned off it. I don't use mode 'sleep', as with the SSD climbing boots Macbook very quickly. But that's just my preference.

  I heard that if you leave your computer connected permanently, a once a month, you must let sink to about 30% and then recharge.

  It is not good to let it drop below 10%.

  Here are some tips on using the battery. Batteries for laptops on Mac - Apple Support

• Question about installing windows on a Macbook Air

  Hello!

  I was just wondering if I would be able to use the student updated Windows Upgrade Pro 8 (the http://www.microsoftstore.com/store/msapac/en_GB/pdp/Windows-8-Pro-Upgrade---Student-Offer/productID.282175100) to install Windows 8 on my Macbook with BootCamp. Or Windows products 8 student updated only applies for machines with existing versions of Windows installed?

  Thank you!

  Hi Tatiana,

  If you are still looking for more details here is what, in my view, could help you.

  As Shenan Stanley says, if you do not have a qualifying previous OS such as Windows XP, Vista or Windows 7, you can not use the Windows 8 Pro Upgrade. Also, here is a link that talks about

  Boot Camp: Frequently asked questions about the installation of Windows 8

  I hope this helps.

• ICloud emails disappear at the time of my Macbook Pro when I delete a message from iCloud of one of them?

  I'm an old Geezer Mac, but a Newbie iCloud. I just put on my two Macbook Pro iCloud email addresses and access e-mail through Apple Mail on both computers. Here are my two questions:

  (1) iCloud emails disappear at the time of my Macbook Pro when I delete a message from iCloud of one of them?

  (2) if I move an e-mail message to iCloud Inbox Mail at Mail Archive on a Macbook, can I delete the message from the second Macbook without losing the archived message?

  Yes, that is what is supposed to happen with an IMAP e-mail account.

  If you move it to a folder on the Mac, not in the iCloud account, you can remove safely icloud.

• cleaning the dust inside my MacBook pro

  I opened the bottom of my MacBook Pro recently and was shocked to discover how the dust (and a few dead gnats) was there. It is mostly around the perimeter. Is there a way I can safely clean or do I need to take it to a professional?

  I apologize if this is a question repeated on this forum. I was just trying to look for an existing thread, but the guarded site bring me back 'post' a new question.

  Thank you.

  You can use a suction pipe.  Computer, please land on outer case.

  Compressed air can.

  You can google for "compressed air for cleaning mac.