Question about updating map of RAM and graphics on Equium A100-027

Similar Questions

• Updated map of RAM and graphics on Satellite 2450

  I want to upgrade the RAM and graphics card on my Satellite 2450-101. I wondered if any body has tried to do and is it worth to do. I've been to the Brazil and anywhere with this computer and you want to buy a new one.
  I added a new drive hard 80 GB and an additional 30 GB and can do all the shooting, I want. I want to upgrade to the best graphic card for my model or if anyone knows anything which would be compatible.

  I have a nvidia 4 400 to go now with Pentium 4 processor, if anyone has any advice, it would be much appreciated.

  Hello James

  Unfortunately the graphic card cannot be updated. Buy more RAM is a good idea.
  The maximum memory that your device can handle with is 1024 MB. Compatible memory module are:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  Good bye

• Upgrading RAM and HDD on Equium A100-027

  Hello

  I have an Equim A100-027 and I already upgraded the two 512 MB to 2 GB 2 memory chips which is the maximum I can get?

  I've also already installed a hard drive over a 350GB one, but I'm looking to install a high - what is the maximum size that I could install? I guess that there must be a limit, but I was hoping that 750 GB to 1 TB would be OK.

  I appreciate all the answers - thanks in advance.

  Hello

  I'm afraid that 2 GB RAM ist the value of memory as possible which is supported by Equium A100-027 Mr. I have this chipset limitation.

  Upgrading the HARD drive must be possible from the controller SATA isn't limited to a certain size.
  That's why I think that 750Go should be possible

  Please share the news with us after finishing these updates.

• Question about updating the driver for the graphics card Intel HD on satellite C series

  This keeps coming up when I use the 2.5 Update utility driver Intel (r)

  "A custom computer manufacturer driver is installed on your computer.
  The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver
  instead of the custom computer manufacturer driver may cause technical problems.
  Contact your computer manufacturer for the latest driver for your computer.

  Should I change "Driver from the computer manufacturer custom" for the generic last by (a "driver Intel) - https://downloadcenter.intel.com/

  I'm looking for the option that gives the best fps

  Intel HD Graphics Info:
  http://prntscr.com/b6ujgb
  System information:
  http://prntscr.com/b6ukbs

  I have to install the driver manually, with exe it will not work.

  http://www.Intel.com/content/www/us/...000005629.html

  1. Download the graphics driver ZIP file. Unzip the file to a designated location or folder.
  2. Open the Device Manager:
  3. For Windows 8 and 8.1 Windows: press the Windows and X keys simultaneously.
  4. For Windows 10: Right mouse click on the Windows Start icon
  5. Click Yes when you are prompted for permission to the user account control.
  6. Expand the display of the maps section.
  7. Right click on the entry of Intel® graphics and select Update driver software.
  8. Click Browse my computer for driver software.
  9. Click Browse and select the directory where the driver files.
  10. Click Next. Drivers are being installed.
  11. Restart the computer when you are prompted.

• Need direction for the upgrade RAM and graphics card in my all-in-one Center B320 Office idea.

  Hello

  I want to level of Ram and graphics card I have my all in one ideacenter B320 Office.

  current specification of my office:

  CPU - 2nd gen cor i3 (3.10 ghz)

  RAM - 3 GB

  Graphics - 1 GB (AMD)

  can I put at 1.5 GB or 6 GB and 2 GB graphics card ram level.

  orientation need help pls...

  Thanks to adwance...

  Hi Mahendranaik63

  Welcome to the Community Forums of Lenovo!

  I guess these B320 data can help you with updates.

  Data sheet B320of Lenovo. (The information you are looking for 'KEY FEATURES' statement).

  Also check this personal reference guide under Lenovo B320 page.

  I hope this helps.
  See you soon!

• Can I change CPU, RAM AND graphics in HP Commpac D220?

  Hello! Thanks to the time to read this topic, I have a question on my hp compac D220 pc so I hope you will tell me the answer!
  IM runing windows 7 now and try to install windows 8.1 but IE NX unsupported. So I decided to change my processor and the extra ram of 1 GB ad, and the new graphics card but I don't know that the graphics card & CPU (last) support my pc.
  Here is my pc in detail.
  1.80 ghz, 180 GB HARD drive and 1 GB of ram, motherboard AMIBOIS, Windows 7 running. So suggest
  me that I buy a new pc or
  change cpu, ram and graphics card.

  Hello

  As it is an OEM machine, you will not be able to replace the CPU this processor is specifically compatible with OEM motherboard. If you are looking to change the CPU, RAM and GPU, you really can both do you a favor and buy a new machine all together, or build your own.

  Kind regards

  Patrick

• Questions about a relationship between InDesign and S1000D specification

  Hi I have a few questions about a relationship between InDesign and S1000D specification. First, InDesign does not meet an S1000D standard? If so, what questions are supported in InDesign as "S1000D issue 4.1'?." In addition, inflicts InDesign interconnected with CSDB through any creative or other module. I'm looking forward to get useful answers and thank you in advance.

  I agree with the screen name of Test in this regard. Technical publications represent only a small percentage of the market of InDesign. And it is likely that the authors of these publications InDesign may not have heard of the S1000D specification.

• Equium A100-027: is it possible to update the graphics card?

  I recently received an Equium A100-027 for my birthday. Overall I am very happy with it, but the only problem I have is with the graphics card. I'm a gamer, and the graphics card just can't handle more modern games.

  I am looking how to change, how much it cost etc. However I don't want to buy a graphics card just to realize that inside is locked. Since it's only a week I want to take a hammer to it right away ;-)

  Can someone tell me how it is difficult to upgrade the graphics card? It is locked, or easily accessible?

  Hello Eamonn

  Unfortunately, upgrading the graphics card is not possible. I'm don't know if you're familiar with cell phone technology, but you should know that graphics cards installed on laptop motherboards are not same as the GPU for desktop PC s s.

  The map is fixed and there is no way for an upgrade!
  You can upgrade the memory or HARD drive on laptop computers but not the graphics card!

  I also have a player m and I m a laptop owner but I don t use this device for games, but for a typical use like the internet, programming, members, etc.
  I have a second game machine and it s a desktop PC. It s supports a map of water cooling module and a really great graphics, but I'll change it to the a newer NVIDIA supports the directX10.
  It is a future and all new games will this DrectX10!

• Equium A100-027 - Question about the installation of Win 7:32-bit or 64-bit

  Hello

  I have an Equium A100-027
  I have just ordered an upgrade to 2 GB RAM and want to do a new install of WINDOWS 7 on Vista.

  Should I go for the 32-bit version or 64 - not sure if I need one over the other based on the processor?

  Thanks in advance

  David

  Hello

  Windows 7 32 bit supports max 3.2 GB of RAM
  In case you want to upgrade the RAM to 4 GB of RAM, I recommend to choose Windows 7 64-bit to be able to use all 4 GB of RAM

  The processor is an Intel Pentium T2060 that supports 32-bit but physical address Extensions is based on 32 bits, which allows x 86 processors to access more than 4 GB of physical memory

• 2 GB of RAM for Equium A100-027

  Hi guys,.

  Can I install 2 GB of ram or 2x2gb even in my Equium A100-027

  Thank you very much.

  According to the specifications of the laptop, your laptop can handle with 4 GB of RAM.
  For example, you can use 2 x 1 GB (PA3411U-2M1G) or 2 x 2 GB modules.

  Before buying RAMs pick up info on compatibility and copy the Rams of high quality.

• Need information about HDD upgrade on Equium A100-027

  HI people :-)

  Can I change the HARD disk drive in my Equium a100 027 for one with a speed of 7200 RPM?

  If not what is the largest size of HARD drive I can put in?

  It is also useful to do a lot to make a dual boot with Vista and XP or get one with Vista and the other drive with XP

  Someone can also point me in the direction of the place where to buy the right type of player with the correct connection... its SATA I think

  Thanks in advance for your help

  In my opinion, you can use the HARD drive with the speed of 7200 RPM. I put t really see no reason why this should not be possible!

  It is important that you buy a HARD drive with the interface supported and the size of the HARD drive.

  You are right; Equium A100 supports SATA HDD interface.
  You must not use SATA and IDE hard drives!

  According to some internet sites, the laptop came with 80 GB HARD drive.
  I presume that you should be able to upgrade the 120 GB HARD drive, but this is just a suggestion because Toshiba does not have any official information on the maximum size of HARD drive.

  Best regards

• Question about the extension of RAM on Satellite M30X 163

  Hello

  I can install it as an extension of RAM on my laptop model?
  I have now 2 x 256 MB (default factory equipment).
  I'd appreciate any help about my question:
  Type, frequency, the maximum capacity for each of the 2 slots?

  Thank you very much.

  Hello

  According to the specification for laptop, your laptop can handle with 2 GB of RAM and 1 GB of RAM followed the part number - PA3313U-1M1G. Put this number in Google and you will find info on this compatible RAM module.

  To avoid compatibility problems, I recommend using the compatible RAM only.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• 3647 Inspiron small office limit of RAM and graphics upgrade card limit

  Hello world

  I thought about upgrading RAM on my Inspiron 3647 small office and graphics for a while now, and I would ask if she can handle 16 GB of RAM (8GBx2) and for all of the suggestions for an upgrade of a 625 GT that would go in his case. The computer has 2 DIMM slots, so I don't think that the 16 GB of ram should be a problem. He already has 4 GB pre-installed.

  Thanks in advance.

  It supports 16 gigs.

  http://www.crucial.com/USA/en/compatible-upgrade-for/Dell/Inspiron-3647

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.