Question about upgrade disk for Tecra M1

Similar Questions

• Question about CD recovery for Tecra M2

  Maybe it's a stupid to ask question, but the recovery for Tecra M2 CD comes with windows XP? I need to reformat my laptop, as it is infected by spyware unerasable. When I bought the laptop it only comes with the recovery CD.

  Hello

  There is no question beast just dumb response. The recovery CD with Windows XP Professional and all the necessary drivers, tools and utilities.

  You can install it on two tracks with the help of an installation standard and expertise. If you have only a partition there is possibility to do both by using expert mode. If you have more questions please write again.

  Good bye

• Question about updating drivers for Tecra A9

  Hello

  I noticed that support Toshiba updates drivers for Tecra A9 very slowly even if they introduce important features. For example, the display driver for 965 graphics worm 15 is much better than 14 worm distributed by Toshiba. I know that pilots are tuned and Toshiba has many models to take care, but several months of waiting seems to be too long. I do not expect that all minor versions are updated, but the most important should be!

  Kind regards
  Marek

  Having the latest drivers would be nice, but its different for laptops. Motorists need to be customized for the features of the laptop, and they probably need to go through quality control, testing too although I guess.

  However there may be a solution, you can try to install the drivers later on newer models such as the Tecra A10 and M10 :)

• Question about updating Bios for Tecra M5

  I bought the new tecra as M5 on May 12, 2006. I found the following bios updates.

  16/05/06 update BIOS Toshiba 1.50 - TRAD
  16/05/06 update BIOS Toshiba 1.50 - WIN

  Should I go for this upgrade? Please recommend me.

  Hello

  I na? don't know why you want to update the BIOS.
  Your device is fairly new in this case I na? t see any direction update the BIOS.
  Please note that the update of the BIOS is not without risk.
  If you use a bad BIOS or bad BIOS procedure if you may damage the card and these laptop parts are not very cheap.

  I agree with Flo. If your laptop computer is operating properly you shouldn't? t make the updates to the BIOS.

• Question about upgrading CPU for Satellite A30 104?

  Hello

  My Satellite A30 104 recently came at the end of its warranty and had to open the heatsink for cleaning, and seeing that the CPU was available, I wonder if there should be (likely) to upgrade.

  The processor is a Celeron 2.6 GHz (Northwood). I'm no more grunt, I would prefer a more low-power chip, while the cache L2 much bigger of a Pentium 4 is also desirable. I would be very grateful if someone could give advice if upgrades are likely available, and if so the chips would be appropriate? If I can give any more useful technical information, please ask.

  Thanks in advance.

  Hello

  Usually it s not advisable to upgrade the CPU on laptops, because no one can tell if the laptop runs correctly and stable after the upgrade.
  The heat and the temperature inside the laptop could be a serious problem.

  In any case, I think that the laptop supports an Intel 852GME chipset.
  http://www.Intel.com/products/chipsets/852GME/index.htm

  The Intel 852GME chipset is optimized for the Mobile Intel Pentium 4 processor, has a main bus at 533 MHz and up to 2 GB memory DDR 266/333/200 at high speed.

  But I'm not sure about m making it s 479 or 478

• Question about upgrading RAM for a Satellite A110-133

  The following ram would work on the laptop mentioned above?

  Kingston KVR533D2S4 / 2 G 2048 mb so-dimm, 200 pin

  Thank you.
  Any input would be appreciated

  Hello

  This page might be useful for you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24868&ft=m&St=3

  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM barrettes.

  But I doubt that the Kingston KVR533D2S4 / 2G 2048 mb would be fine because the A110 can be upgraded up to 2 GB, and in this case, you can only use 2 x 1 GB RAM modules

• Question about upgrading CPU for Satellite L30-101

  Is it possible to upgrade my processor from a 1.44 to what higher?

  No, there is no way because:

  -It s too expensive
  -It s complicated Exchange when you´re no technician for laptop
  -you won´t win any show (especially when the performance vs price comparison)

  Instead update your RAM and your HARD drive since that these components are comp. evolutionary and better will give you better performance.

  Welcome them

• Question about upgrading processor on Tecra A9 (PTS52E)

  Is an X 9000 compatible with this laptop?

  Thank you

  It should be straight Tecra A9?

• Question about upgrade DDR2 for X 200

  I want to improve my PC2 DDR2 memory up to 4GB (2 GB-implementation to date) and I don't know if I could do it anywhere I want (to people who know how it works) so I first look in my computer laptop-description and then I'll go to the 'compatible accessories' > there I found the upgrade memory : 2 GB memory - DDR2 PC2. (Model nr. PA3513S-1M2G)

  Is this a good offer?
  On this site, they say: 'Toshiba shop is not a Toshiba offer himself, but an offer of a trader. So what? I couldn't install it and I think that if I would, the warranty is broken! (break)?

  What could I do? Only go to an electronics market and get this installed and the warranty is still active, or what? I put t know what to do!

  My system: X 200-21 L - work this update on my laptop?

  OPTIONS PAGE

  Hello

  I don't really understand you. Page 141 of user s manuals you can find the description on RAM upgrade. It that what is described in the public document which means this can be done by the owner of the laptop.

  So what you need to do is buy the compatible module, follow this manuals and RAM upgrade. All that s!

• Question about upgrading BIOS for Satellite P30 145

  Hi all, first post!

  I have just received notification that there is an update of the BIOS for my laptop, Satellite P30-145, I downloaded and tried to install it but I get this message "the size of the rom file is incorrect" ideas?

  Hello

  Seems Toshiba has released and document technical support for this newsletter.
  I found this useful statement from Toshiba:

  I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows.
  I always get an error message: the size of the ROM file is incorrect.

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  I hope it helps.

  But note; The update of the BIOS is always risky! If you have any problems with your laptop you n don't need to update the BIOS.
  The bad BIOS or bad BIOS update procedure may damage the cell Board!
  So take my advice and never change a running system ;)

  Greetings

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.

• 1700-500 pictures satellite images: Questions about upgrades

  Hello
  I have a computer laptop 'satellite 1700-500' with Windows XP Home SP2 operating system installed and wish to update.
  1. thesis topic:
  My wish is to extend more than 512 MB memory, if possible. The user manual mentions that the maximum ram is 192 MB so added a module of memory of 128 MB (64 MB of non-removable memory). But the program "SiSoftware Sandra Pro 2005" detects and indicates:
  "Number of memory slots: 3.
  "Bank0(64M), Bank1(64MB), Bank2 (empty).
  "Maximum Installable memory 1 GB.

  I see only a single slot in the memory compartment. Where is "Bank2?
  According to data of Sandra, I install a module of 512 MB increasing memory in a total of 576 MB? What do you suggest for me? Finally, what is the maximum memory extension of this machine? What types, models and brands of memory I can install? buffered or not?

  2. on the hard disk:
  Can I install a 120 GB ATA-100 drive? Otherwise, what is the maximum size that can be installed?
  BIOS have been updated (v 1.30 (a)

  Please tell me details in both cases.
  Thank you very much.

  Hello

  The 1700-500dvd Satellite has an internal memory of 64 MB. According to the user manual it of not possible to remove it. In addition you can upgrade memory for max 192 MB (64 MB + 128 MB). There is a max value.

  In addition, these modules are supported:
  32 MB PA3003U memory
  PA3004U 64 MB of memory
  PA3005U 128 MB of memory

• I can't find drivers for 64 bit Vista Protection disk for Tecra M5

  I can't find the vista driver 64 bits for the hdd protection modul, when toshiba update all the drivers for the 64-bit operating system?
  It's amazing, that no support 64-bit for tecra M5 and the machine has a 64-bit processor.

  I hope that the quick news, thanks a lot

  Abel manzanera
  University autonomous of barcelona

  You are right. At the moment there is no support for Vista 64-bit, but it will be supported in the future. I phoned with guys from Toshiba which cares about notebooks in my company. He told us that Vista 64-bit support should begin this summer.

  We'll see when drivers will be available on the support page.

• New disk for Tecra M2

  Hello

  I want to install a new drive HARD 80 GB on my Tecra M2 1.8 GHz, purchased dec 2004. At this time a new 80 GB HARD drive has been the product of PA3230U - 1: 80. A new HDD of 80 GB for Tecra M2 is now under the name of PA3407 - 2 80 H. Can I use it in my Tecra M2 (from 2004)?
  Thanks in advance.
  Dr. Weekx R

  Hello

  To my knowledge the Tecra M2 accepts the 30 GB; 40 GB; 60 GB; 80 GB and, therefore, you can install the 80 GB HARD drive with no problems.
  I think that it s no matter if it s a PA3230U - 1: 80-PA3407 - 2 H 80.

  The laptop supports an interface Enhanced IDE (ATA-6) and Enhanced IDE (ATA-5)
  Thus, you can use a disk HARD 5400 RPM 80 GB, size memory buffer of 8 MB, which takes in charge an EIDE (ATA-6) interface.