Question about upgrading RAM on Satellite A200-1CR
I have the Satellite A200-1CR, PSAE0E-02G01TSK
I have 2 GB of RAM
I can install 4 GB of RAM (because I try 2x2Gb 800 MHz) and don t work.
Do I only 667 MHz or my laptop supports only 2 GB?
Your laptop can be upgraded to 2 GB top only and for the upgrade you must use 667 MHz compatible modules.
To correctly update I recommend 2 X 1 GB DDR2-667 with PA3512U-1M1G part number.
My laptop model is Satellite U400-138, part number: PSU44E-00500JG3
type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
Clock speed: 2.26 GHz
Front Side Bus: 1066 MHz
level 2: 3 MB cache
Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)
standard: 3 072 (2 048 + 1 024) MB
maximum extension: 8 192 MB
technology: DDR2 RAM (800 MHz)
In intel webside one writes the following on my motherboard laptop specifications:
"1.2 Intel GM45 Express Chipset supported feature
All features supported by the Intel PM45 Express Chipset supported by Intel GM45
Express Chipset unless otherwise stated below. Additional features are listed below. "
1.2.2 memory system «»
-Support to 667 MHz DDR3 then FSB 667 MHz isn't that. "
"1.1 Intel PM45 Express Chipset supported feature
1.1.2 storage system
-Support for DDR2 and DDR3 SDRAM
-Support for DDR2 667 MHz and 800 MHz
-667, 800, and 1066 MHz DDR3 support
-One SO-DIMM connector (or memory) per channel
-Channel memory supported two Configurations
-Double-channel symmetrical (with Interleaved access)
-Dual-channel asymmetrical (with or without Intel Flex memory technology)
-Support for 8 GB of maximum memory
-scale 64 - bit per channel
-Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
-Support for DDR2 and DDR3, x 8 and x 16 devices
-Support for DDR2/DDR3 termination on chip (ODT)
-Supported partial written memory using data signals mask (DM)
-No support for chip quick selection mode
-No support for ECC
-No support for operation 1N. "
The question is...
I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?
In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:
Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
Type of module - SO-DIMM
So if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.
If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).
I have a Satellite Pro A100 PSAACE I want to upgrade. I currently have 1 GB of RAM in two 512 MB modules. I looked on Crucial.com and he says I need DDR2 PC2 4200 module (240 pin DIMM), but of course, they want to sell their own stuff that only comes in 1 GB modules.
So, what is the maximum amount of RAM my computer can take? I would like to have more than 2 GB in order to make my page file smaller. Is 2 GB maximum I can put in?
To be honest, I read several threads where people were not so happy with the RAMs from crucial. In my opinion, you should spend your laptop with 2 x 1 GB RAM. With 2 GB of RAM, your laptop will work fine and I'm sure you'll be happy with it.
As recommendable modules, you must use either 1 GB (PA3411U-2M1G) or module recommended by Kingston.
can someone reassure me I'll buy the correct RAM and the best for my 2 Satellites. One is the P100-423.
The other is Satellite Pro P100.
(1) can I use modules of PC2 5300 DDR2 SO-DIMM 200 pin - 667 Mhz on both computers.
I want to buy chips to 4 x 1 GB (all the same), so both will have 2 Gig ram PC.
(2) I saw the bullets above with 533 Mhz, but told me I can use or 667 Mhz. Is this correct?
667 Mhz would be faster and better is not it?
(3) some chips are also designated PC2 - 4200 - instead of PC2-5300. Again, I can use either?
(4) Finally, I always thought that it was better for if adapt to 2 memory chips to live the same size - that is why I want to use 2 x 1 GB chips.
Yet, I was recommended to mount 1 x 1 and 1 x 2 GB in each pc.
I know that IE a total of 4 GB is theoretical only 3.25 GB is possible.
But asymmetric training will offer much greater performance on balance training 2 x 1 GB. ?
Thank you very much for all the advice offered
With the help of RAM slower is possible. I have another laptop to work with the iso 4200 5300. It works ok.
However, using the exact speed is better because it gives the best performance. Your system calendar is set on those memories.
However slower modules, but more RAM still will give you better performance.
3G seems to be the max for Vista-32. The imbalance is obviously not optimal, but I expect that the performance is better with 2 GB.
I need to change (upgrade) my RAM from 1 GB to 4 GB in my laptop with the part number PSAE0E-02G00YAR and I need to know if it works or not.
Guys please I need to know as soon as POSSIBLE.
Thank you in advance.
Your laptop can be upgraded up to 2 GB only. The compatible RAM modules are:
1 GB DDR2-667
2 GB DDR2-667
I have a Satellite A200-13O with 120 GB HDD, 1.8 GHz Intel Centrino Duo, 1 GB of ram, but there 2 512 chips installed.
If I upgrad 2 1 GB ram is it possible to improve performance...?
and what happens if I switch to 2 GB dual channel...?
It has Windows Vista Ultimate...!
Do you mean that you would use a single module of ram of 1 GB?
Well, you would still have 1 GB of RAM, but the dual channel cannot be used due to lack of second module.
So, if you can, try to use exactly the same 2 modules for best performance of the memory.
The laptop supports two memory locations so you can't do anything wrong insert 2 modules in slots 2 to run dual channel modules
How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.
I have a laptop Satellite A200 - 1 DR (with 1 GB of DDR2 RAM) and it is 5 days old. I bought an another 1 GB of Corsair RAM (DDR2 PC5300 5-5-5-12 as the first). The problem is that with both submissions the laptop not boots or boot boxes when the quiet boot option is enabled in the BIOS but windows Vista refuse to go or to restore.
I also tested the memory only Corair on the first location of memory of the laptop, and it works perfectly (vista and memtest86).
So I tried only two submissions on the second slot of memory of the laptop, and the two do not work: quiet Boot option on vista cannot go and memtest86 freeze after 1 sec. When the quiet boot option is disabled, the bios memory test freeze to 256 MB (with 2 memories it freezes at 512 MB).
To me there seems to be a bug in the BIOS, you have any information on these bugs?
Thanks in advance
a man who is not a bug in the bios. Have you ever heard of compatibility problems between the memory modules? The strange thing is that the memory modules can have the same features should not work together when they are not compatible with each other.
You have two different manufacturers using different modules and pcb´s (printed circuit board).
So if you're going to tell me what manufacturer's stock module I'll tell you that they are not compatible because I really know that privateers work right and good when you install corsair two modules (or how I want to say. TWO MODULES OF THE SAME MANUFACTURER).
This is it and it s the same story in desktop computers. I have two desktop computers in my office at home and one of this for overclocking. I had a lot of modules in my machine, so I had a lot of problems at the time of the twinning of the two different modules. And that's the thing why I tell you this, because I really have knowledge about this thingys. :)
Just buy an another corsair modules and put your stock on ebay module. You will see how your machine will work. Or better, bring back the corsair, sell your stock on ebay module and buy a pair of the best modules from kingston, you can get since the modules have absolutely no problems with compatibility.
That's my opinion. And nothing to do with a few bugs of bios or something else...
I want to buy an internal memory of my A200 Satellite Pro Mod no, PSAE1E, but I can't find my model in the drop-down lists, what memory do I need, I want to switch using two sticks of 1 GB memory, at the present time, I have two sticks of 512 MB installed.
Compatible modules are: * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM *.
As far as I know all the A200 series laptops can evolve until * 2 GB *.
This means that a memory would support module of RAM 1 GB max.
As the previous user have already said, the Kingston modules are not bad.
I also use it in my book and so far, the modules are ok.
See you soon
I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...
Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
But someone has tried successfully to put in PC133 memory? And if so, to were the limit?
And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
Or would it be easier to exchange the whole motherboard?
I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...
I would be delighted if someone could give me some positive feedback on these issues...
You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
If you use 133 Mhz modules, they will work only at 100 Mhz.
You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard
Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the
I have a Toshiba Satellite A60 S-131, bought 2 years ago.
I want to know is it possible for me to upgrade (internal) for a superior ability to HDD 40 GB HARD drive and update my RAM to 512 MB on the rise.
Also I already inserted a 256 MB DDR RAM in the empty memory slot almost 1 year ago.
Help will be appreciated.
You can definitley upgrade your hard drive for a larger version. You should find that a 80 or 100 GB will work fine. You should make sure that you get you a new disc with the same physical characteristics as you existing. The following link will help you remove the hard drive.
You can also get a new hard drive with a more rapid rotation speed (5400 RPM or 7200 RPM).
I think that the maximum RAM for the A60 is 1.25 GB which includes 1 X fixed module (I presume yours is 256 MB, which means that you can install an additional module with a capacity up to 1 GB. Available in capacities of 256 MB, 512 MB and 1 GB of RAM modules.
I need a major update so I wanted to know if it is possible to upgrade the processor. I'm already playing Doom 3 ulra high with 4 X Ati and 1024 X 768.
He sent me some 46 frames per second, with 2 GB ddr 533.
Then I put the Satellite P100 - 188 T2400 T2500 or T2600 CPU and can I use ddr2 667 mhz Ram?
Any suggestions how much performance increase if you upgrade hard drive 5400 RPM to 7200 RPM with 8 MB of cache?
The CPU cannot be replaced. But you can expand the memory with the modules:
PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
PA3512U-1M1G(DDR2-667 1GB Memory Kit)
PA3513U-1M2G(DDR2-667 2GB Memory Kit)
DDR2-533 256 MB (PA3389U - 2M 25)
512 MB DDR2-533 PA3412U - 2 M (51)
1 GB OF DDR2-533 (PA3411U-2M1G)
The maximum memory that you can use this camera is 4 GB.
The following ram would work on the laptop mentioned above?
Kingston KVR533D2S4 / 2 G 2048 mb so-dimm, 200 pin
Any input would be appreciated
This page might be useful for you:
You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM barrettes.
But I doubt that the Kingston KVR533D2S4 / 2G 2048 mb would be fine because the A110 can be upgraded up to 2 GB, and in this case, you can only use 2 x 1 GB RAM modules
I want to upgrade my laptop (p100-240), where would I find the 2 GB of ram for this go to 667 mhz + can be you add another HD and you run a raid Setup?
Of course, you will notice an increase in performance. The upgrade from 1 GB to 2 GB is a lot.
I have much heavy app will load faster and you might be able to use more whole--> multitasking applications
Ok. i've got the Satego X 200-21 L (as the Satellite X 205 except the screen resolution) and I want to upgrade my memory to work up to 3 or 4 GB.
1 What is more profitable? An increase of 4 GB or 3 GB? I need it because Vista makes my Latptop very slowly sometimes, and for games.
I've heard Vista only detect / 3 GB (I have a 32 Bit system) - is this true?
2. where could I install and build in this helping hand storage work? What I have to go to a toshiba - authorized reseller or I could do in the next electronic market close to home?
3 should I know something important about him - as a guarantee - it could run out if I increase my working memory?
THANK YOU SO MUCH FOR YOUR ANSWERS!
You can upgrade your laptop up to 4 GB of RAM. The compatible RAM 2 GB module has PA3513U-1M2G part number. I heard that the problem in recognizing/3 GB should only be solved with SP1.
Upgrade of RAM do not negate the warranty valid. It is also described in the manuals page 123 s user document. Check it out.
Maybe you are looking for
I received a message on my Apple Iphone is "your Apple ID and phone number are currently used on a new Mac" what does that mean?
(a) I opened Firefox a totally blank page (without tab or anything like that), and a title bar (which I normally do not have) says "Mozilla Start Page.(b) I closed and reopened Firefox again, and my previous session was missing. The two places were y
Something resembling a spacer (but it does not turn white when I open customize it menus) appeared at the end of the right hand of my bookmarks toolbar today and more waste 25% of my bookmarks toolbar. It can be removed in the way spacers can normall
Series of Photosmart HP 6510 on Windows XP. During the system boot is looking to load HPPhotosmartEssential.msi but it can not be found. It may be in the Prefetch folder, but it isn't here now. I don't know where he is now, but I would like to get
When opening a new window and navigate to pages over the back button is still gray and does not work.When opening a new tab in the same window, and navigate to other pages it works correctly.Therefore, the problem is that when the opening of a new pa