Question about Windows MultiPoint Server with VNC

Similar Questions

• Windows Multipoint Server 2011, several stations does not.

  WINDOWS MULTIPOINT SERVER 2011, SEVERAL STATIONS DOES NOT

  I USE WINDOWS MULTIPOINT SERVER 2011, TWO STATIONS OR MORE ARE NOT ABLE TO IMPLEMENT.

  I INSTALLED 20 CAL DEVICE

  HOW TO INSTALL SEVERAL STATIONS? ANY OTHER LICENSE, I NEED AGAIN?

  Help me. .

  CONTACT ME: * address email is removed from the privacy *

  Hello

  Because the problem is with Windows Multipoint Server, I recommend you post this question in the Forums of Windows Server.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Windows Multipoint server 2012

  Hi all

  I am facing this problem in Windows Multipoint Server"

  The number of connections to this computer is limited and all connections are in use right now. Try connection again later or contact your system administrator. I want to connect through a single server 20 clients but when seven users are connected to other people can not connect. I need some help on how I can solve this problem.

  Thank you

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your question in the Multipoint Server Technet Forums.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsmultipointserver

  See you soon.

• picture of windows multipoint server premium edition 2011

  Hello

  need urgent image of windows multipoint server premium edition 2011

  I download the same support of https://www.microsoft.com/licensing/servicecenter/

  download media is wrong (it's the image of windows server 2008 r2 edition)

  the name of the image download is [SW_DVD5_Win_MultiPoint_Svr_Prem_2011_64Bit_English_MLF_X17-35077]

  Please someone do what is necessary for the same

  Hello

  I had a call with vlsc Center, 0008004401555. the Executive said to post an email and he tried to reslove the issue.

  then I look on the net. I got my answer in wikipedia

  "Windows MultiPoint Server 2011, based on Windows Server 2008 R2 SP1"

  When we install the software we get first installation screen "windows server 2008 R2" because it is based on windows server 2008 R2. »

  When the installation is complete we have windows multipoint Server 2011

  and we also get the "windows server 2012" screen when we install mulitpoint 2012

  It's the first version of the MultiPoint rest on Windows Server 2012 ,

  Please visit: http://en.wikipedia.org/wiki/Windows_MultiPoint_Server

  THE PROBLEM IS SOLVED

• How to connect to a Windows 2003 server with a domain from a Win7 pc

  How to connect to a Windows 2003 server with a domain from a Win7 pc

  Hello MikeYoungblood,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Question of illegality leading to Windows 2008 Server with more than 80 updates that will not be updated and a pilot for the series it won't install

  From of the CBS.log journal:

  2016-01-07 16:55:10, enforcement operations 1 CSI Info 0000085f; 1 will not lock/unlock and follow:
  Installation (5): flags: 0 tlc: [2f8866815daa89b0e3664a874948093e, Version = 6.0.6002.19439, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:150 {75}] "' Package_2_for_KB3075220 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0.3075220 - 5_neutral_GDR ' ncdata: [2] {1} '2'") print: (null)
  2016-01-07 16:55:10, the change of information CSI 00000860 list components: {(null)-> 6.0.6002.19439 2f8866815daa89b0e3664a874948093e, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  {6.0.6002.18356-> 6.0.6002.19439 Microsoft-Windows-TerminalServices-ClientActiveXCore, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  2016-01-07 16:55:10, error CSI 00000861@2016/1/7:08:55:10.470 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:20, error CSI 00000862 (F) STATUS_ILLEGAL_CHARACTER #4243867 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000863 (F) STATUS_ILLEGAL_CHARACTER #4243866 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, info CSI 00000321 SMI primitive installer [completed]

  2016-01-07 16:55:20, error CSI 00000864 (F) STATUS_ILLEGAL_CHARACTER #4242866 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000865 (F) STATUS_ILLEGAL_CHARACTER #4242865 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000866 (F) STATUS_ILLEGAL_CHARACTER #4242864 # to CCSDirectTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000867 (F) STATUS_ILLEGAL_CHARACTER #4242863 # to CCSDirectTransaction_IRtlTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, d:\longhorn\base\lstring\lblob.cpp(2217) 00000868@2016/1/7:08:55:20.757 (F) CSI of the error: error STATUS_ILLEGAL_CHARACTER from the RtlTranscodeLBlobs expression function: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:38, error CSI 00000869 (F) STATUS_ILLEGAL_CHARACTER #4244511 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 a (F) STATUS_ILLEGAL_CHARACTER #4244510 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, info CSI 00000322 SMI primitive installer [completed]

  2016-01-07 16:55:38, error CSI 0000086 b (F) STATUS_ILLEGAL_CHARACTER #4243994 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 c (F) STATUS_ILLEGAL_CHARACTER #4243993 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 d (F) STATUS_ILLEGAL_CHARACTER #4243992 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086e (F) STATUS_ILLEGAL_CHARACTER #4243991 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086f (F) HRESULT_FROM_WIN32 (582) #4242712 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000870 (F) HRESULT_FROM_WIN32 (582) #4242527 # to Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_102_(0x00000066), pSink = NULL, disp = disp, coldpatching = FALSE) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000871 (F) HRESULT_FROM_WIN32 (582) #4242526 # 34399459 us by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x00000066,_pSink_=_NULL,_disp_=_0)
  [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CBS Exec: could not validate transaction CSI to run changes. HR: 0 x 80070246
  2016-01-07 16:55:38, Info CSI CSI Transaction 00000872@2016/1/7:08:55:38.994 @ destroyed 0x1b9b710

  CheckSUR.log:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.23186
  Version of the package 25.0
  2016-01-07 13:00

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1308
  No error detected

  Control CoreOS key to repairing the corruptions.
  Winner version: 6.0.6002.18005.
  The architecture of the processor: x 86.
  Check the key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18005&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers \metadata\elements\ComputerName
  Recreated the value: @_type.
  Recreated the value: @dataOnly.
  Recreated the value: @default.
  Recreated value: @description.
  Recreated the value: @displayName.
  Recreated the value: @handler.
  Recreated the value: @legacyName.
  Recreated the value: @legacyType.
  Recreated the value: @migrate.
  Recreated value: @scope.
  Recreated the value: @xsd: type

  I tried following https://support.microsoft.com/en-us/kb/942968

  The GlobalInstallOrder.xml both the install.wim from the disk image of Windows Web Server 2008 x 86 and for KB955430 files under %winroot%/winsms both starting.

  Any ideas on how to determine what is the cause, updates do not?

  In addition, I have a lot of lines like these:

  2016-01-07 17:03:02, info CBS Plan: jump package since its start State and the target State are both missing for the package: Package_for_KB2654428_client ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0, current: 0, pending:-16, start: 0, there is: 0, oriented: 0, limit: 4

  Please post your query to the Technet forums as linked server

  TechNet - Microsoft forums

• Wireless can be used in windows multipoint server 2010

  I work on a HP Multipoint Server (MS6000) with a standard operating system (Microsoft Windows Server 2008) and has a router (WNDR3400) in another computer which is about 40 feet of the HP Multipoint server. I also have a wireless Internet adapter WiFi (WNCE2001) universal I want to install on the server of Multipoint from HP. My Question is, will this work on this HP's Multipoint server.

  Rangel SAL

  Hi El Salvador Rangel,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Questions about migration on server 1 for win 7 PC temporarily

  Hello, I am charged with moving that customers 2 of our current of 2 to VMware host separate Windows 7 64-bit PCs TEMPORARILY so that I can install for free ESXi 5.1 as the new host (replacing the current host, which is a Standard operating system Windows Server 2003 on a server Dell Poweredge 2950 using VMware Server 1.0.10).  After the ESXi installation on the server, I intend to spend both clients as they exist now to the new ESXi host.

  I have a few questions about this project, and I hope I can pull your knowledge to help me.  My question is:

  (1) is this a feasible plan?

  (2) what methods would you recommend using?

  (3) should what tools I use?

  (4) can what version of VMware (free) I use on the 2 Windows 7 workstations to serve temporary guest?  A customer is our Standard Windows 2003 domain controller, and the 2nd is an email server and Linux-based web.  I intended to put each on a separate office.

  Any help you offer is greatly appreciated!

  Thank you

  D. Pichard

  You can use vmware player as a free virtual machine player.

  Use vmware converter to convert your servers.

  Is not recommneded for convert DCs however, what you might do, it is to build a new one. However, it is possible.

  the dell 2950: your host in the HCL as compatible uses 5.x

• Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key

  I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system.

  Before I just go further, HRE are some information about my particular system.

  Lenovo ThinkPad T450

  Model: 20BV00BUS

  CPU: Intel Core i5-4300U

  RAM: 4 GB

  Under the product description, it was stated "Windows 8.1 DG Windows 7 Pro 64." My understnading, the ThiknPad has been installed with Windows 8.1, but downgraded to Windows 7. There is also a Windows 8 Pro badge sticker at the bottom of the matchine.

  Is it possible, at the end of the user/consumer, to alter the functioning ti repressive back Windows 8.1?

  Can I create a recovery with Windows 8.1 disk?

  A separate but related matter relates to the Windows product key.

  I noticed the Ultrabook do not come with a sticker / label with the Windows product key (i.e. COST). Some quick research indicated that the Windows key is programmed into the BIOS.

  This indeed true (I wish an audit)?

  The key is visible in some way (for when you need to reinstall the operating system. I have not tried to enter the BIOS at the moment)?

  Thank you for taking the time to consider my question.

  Kind regards

  Victor L.

  Hi Victor,

  I'm in the same boat as you type, but want to keep the facilities of Windows 7 rather than pass them to 8. Just like you, I buy our Lenovo from different retailers and they come with windows 7 installed through the Windows 8 lower upgrade program.

  We had one or two laptops come with a recovery media (for windows 8/8.1 only) but have noticed that all laptops now come with no physical media or codes for the recovery. WIN8 stickers, you described is more came with the license key on the sticker (it comes to stop you using the same license again and again, microsoft will get more money if you buy another license etc.). I also saw that the key is essentially located in the BIOS but were not able to test what we use any of windows 8. I use it even at home!

  To answer your question, you can get a recovery of Lenovo for Windows 8 media!

  Go to the following link: https://support.lenovo.com/us/en/lenovorecovery

  (It help you understand why this method is used on this page as well)

  Select Start,

  Please have your serial number of your laptop, (to find it go to this link: https://support.lenovo.com/us/en/find-product-name)

  If you qualify (which you will very probably) Lenovo will ship for free, recovery disks give it a go, took me 2 minutes.

  I hope this helps.

  Best regards, Max.

• Question about windows theme and display of Web pages

  I have everything, I'm new here, I've had my laptop for about 8 months, but it was stored for the 6 months, so he had only 3 months of use, and that was 99% for watching movies as was my laptop backup (my girlfriends, which was never used)...
  Well I just got my laptop storage and started using it again as I want now to do that my main work computer, it's a Satellite A100 Series. Running Win XP Pro SP2. Well, now I used it for about 1 week now and this is a fantastic computer, expecially the swipe away feature, I'm usually one XP Home Edition, but I do with Pro, just did not have any experience with it...

  Now, here's the problem, and this has always been the problem since bought, when we first bought it and connected to the internet with IE7 fonts have been massive, I figured out how to fix this in the display after a few hours to play settings and also noticed Web pages if there is a background image, it does not appear... (I also found this week is the same for any application on the PC that uses a Web page as Set up, or something, just sectain things... as I open the Security Center in the control panel and everything is white, and background images aren't there (which is white) and even corners which are background pictures are not displayed and comparing to) my other computer, there should be a green and red, background color etc.
  With Windows Media Player buttons should be as purple and black in WMP11, and they like a white background style html on buttons with links to them at the top and playback, stop, etc buttons have a back outside and the inside is white...

  Basically what I'm saying, is that she appears not CSS style WC3 content on some pages and applications on the laptop, and with regard to Web pages that they are exactly the same, I tried IE7, FireFox, front Browser, and still, the only one that displays pages almost as it should is Opera 9.2, but I really need to solve this problem... it is something simple to do with display obioussly , or settings, but I have tried literally every single different way of doing things last week, tried everything in the Control Panel, all toools Toshiba and no results.

  I'm not a beginner, or whatever it is, I can't get this problem, I can't even think of a setting that would do this let alone in trying to resolve this... I have all the Windows updates (although as I said, he did this from the first day of purchase)...

  If I could post a screenhot here I could show you... what Web pages look like in IE7 and FireFox and before (the only difference is Internet Explorer pages is mostly gray and firefox is white, gray is also.)

  Another question, when I was messing with the settings in the Control Panel, under Performace I changed it to something like 'make optimal display for performace' rather than 'Best to display' and it is then my control panel simple with a white background, and everything is not how I'm used, even the categories are made for each section , they are just all grouped together here, and my house Windows on my other laptop is positioned like this, but it at least has a sidebar on the left with a button to change it back...
  now I am at a loss to find the Performace button, as it is there is more, and I want to change it to 'show better for display' not the persomance... so if someone knows how to do this, please let me know... I took a screenshot of my control panel... and it's not naked, I use the Zune Windows (the black buttons and backgrounds theme ), so he used to be a gray background with a status bar on the side with all the links and details dark just like folders etc... So yes, it is another thing that I want to fix.

  Also I do not have the CD to fix it, not more that I think that she needs, but I have a standard out of the box disk Win Xp Pro, I was seriusosly do a fresh install, but I know I'll lose all modules of toshiba and all the extras that it is came up with, that's the only reason for which I don't have as it has Protector Suite QL, that I would have to pay to settle down to do a cleanup, and I really want to do because there is obviously something missing, its as simple as that, there is nothing wrong with the system it is just not set up correctly.

  Here are some screenshots of how I see Web pages, my Security Center Page and my control panel because I messed up he do "Get the best performace of" upward and the screen turned to the basic white and half things in the control panel is now missing, it has been setup in the previous categories... ahhhhh When I try to solve the original problem, I've done another...

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_01-1.jpg

  {It is the Security Center screen when I click in the Panel, that was before I did it fade)

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_02Sep3021.54.jpg

  ("it's now my control panel once I went in ' Premformance and display ' (I think. it was certainly performace in the name of the category)... and I changed a parameter of performance and display which actually use less resources... now I can't change it back, as the button performace is no more :())

  Thanks for reading and I hope although there, can anyone help me cos I hate having to do a fresh install on something as small as this, it is not many programs Add on on my laptop, as I said, it has probably beeen used 20 times ever, and especially for watching movies up to 1 week where it sat in storage for 6 months ago ,,

  Any help would be greatly appreciated... I tried all the Options of the Internet, all the Display Options, all variants, I need something specific, it is not only perform the internet, but the global programs with html style links, etc. and certainly CSS style sheets and the background image in the HTML feature.

  Thanks in advance.

  Hi Jay

  Very impressive display! I can see after 4 days, nobody wrote anything to give you the solution for your problem. I read your announcement with a lot of attention and I have to say that it was not easy to figure out your problem exactly (perhaps because English is not my native language).

  I know very well that new OS install is radical and last solution but I recommend you to check some forums Microsoft WXP because issue described is, in my opinion, more for OS forums for Toshiba forum.

  If you display the same thing in forum Microsoft please post the link, and we can follow the discussion here.

  I wish you good luck and I hope you will find answers soon.

• Question about hosting a SERVER BUKKIT

  Original title:

  Minecraft

  I heard recently that MICROSOFT bought MOJANG so I have a question about minecraft

  I am an a BUKKIT SERVER hosting and I can not get money on the server I can not make/ender_man_killer 9999999 cause he said I have enough, BUT I'm the owner of pay

  No idea. All that I know is, I read there were some concerns of servers BUKKIT peacekeeping under the

  new regime. Can't imagine MS will prevent them, but...

  It is only a community forum. It is doubtful that anyone with responsibilities to the monopoly$ oft running Minecraft servers will see your message, so unless a member of the forum, which has been involved in Minecraft, and BUKKIT servers comes, you'd probably better on a forum dedicated to Minecraft.

  Or, maybe the bukkit below - forum

  http://bukkit.org/

  .

• Where should I post questions about Windows 8?

  I intend to install the Windows 8 consumer overview once it is published next week. What forum is used for questions about W8?

  Noel

  Thanks for all the suggestions. Just for the sake of the of the cleanliness, here's the answer:

  Overview of Windows 8 consumer

  Noel

• Looking for Windows Multipoint Server 2012 Standard

  Hello

  I can't find the standard version of the Multipoint Server 2012. I found a 180-day trial, but it can only be upgraded to Premium and I have a Standard version product key.

  Also, I see that the standard version a well-off 10 landmark. This means that I can use the server in station mode and have also 10 connected on terminals, or the server is considered to be a terminal and only 9 that more terminals will work?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Question about windows 7 Ipx Protocol

  Original title: Protocol Ipx in Windows 7

  I have a Question regarding windows 7 Ipx Protocol.

  I know that from windows 7 to windows 10 there is no ipx Protocol, so my question is:

  Can someone tell me if I can take a program or something that could help me?

  IPX/Spx was introduced more than 32 years ago.  The last support for Novell Netware years clients there.  Care to tell us why you need?

  https://en.Wikipedia.org/wiki/IPX/SPX