Question about WLan and WEP configuration

I got Orange Broadband, which included a Livebox. I installed the bandwidth and he advised me to put up with wires and set up wireless eventually, so I did.

I tried to do wireless, but it does not work. He is told to go into network connections, click on wireless network connection or something and then type WEP key etc, but I can't find network connection wireless @ all on my XP, I need to implement?

On the taskbar, there is a "Config" button, search said to wireless devices, is it? I'm not sure

Thanks for any help

Hello

What model of laptop and wireless network card, you have?

Tags: Toshiba

Similar Questions

  • Question about WLAN and sleep

    Is it possible that I can stop my wireless disconnect when I put my laptop to sleep?

    Sorry but I do not understand your question. If the laptop goes to sleep which means that all hardware components will be OFF. How your WLAN is ON if the laptop lights OUT?

  • About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

    Hi Michael,

    If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

    One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

    Content

    To manage this content, you are currently subscribed and changing your preferences, select the content.

    Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

    You can select to terminate a subscription to a thread.

    Learn how to manage your subscriptions

    Take care.

  • Question about business and Service of Proxy

    Hi friends,
    I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

    If your question is only about the performance analysis,
    try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
    For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

    See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

  • Question about KB 2033173 - SNMP configuration

    Hi guys, I have a question about KB 2033173. It is said

    below is an example of the host SNMP Configuration profile:

    Port 161

    Community

    Community [email protected] receiver

    [...]

    Please note that the recipient's address contains a space, not a "/" as input to the command line.


    I wonder why the "[email protected]"? I think it should be "[email protected]" because the port number is 161. Thank you.



    Yes, you are correct and also keep in mind that there is a lot of difference with the SNMP agent without traps (use the port UDP/161) and SNMP agent with traps (use port UDP/162).

  • Windows 7 starts questions about mac and office 2010 following an installation

    It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

    Hello

    Thanks for posting your query in Microsoft Community.

    Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

    http://www.Apple.com/support/Bootcamp/

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • Question about snapshots and virtual machines

    Hi all

    I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

    I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Thanks for your help.

    Hello.

    What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

    That is right.

    After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

    Exactly the same thing for the upgrades of the OS.

    Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

    Good luck!

  • Question about CR and LF

    Hey guys,.

    Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

    However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

    Thank you

    Hi dora,

    read the Help for the WriteText function.

    There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

  • question about SQL and VMDK places

    Hello world. Im kinda new here so please be gentle

    I'm confused on the locations of the files for sql.

    At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

    My disks are as follows

    1 OPERATING SYSTEM

    2 DB

    3 newspapers

    They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

    It lies in a cluster HA/DRS and we use them both.

    The question boils down to performance.

    If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

    Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

    How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

    What do you do to get your SQL servers to run in vmware?

    Seems like a basic question.

    The answer seems easy. Separate disks so that they do not fight.

    'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

    Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

    Thank you all

    1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

    Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

    2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

    Yes, the virtual controller is correct.

    If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

    As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.

  • Questions about SPDIF cable, connection, configuration on Qosmio G20

    I would use my QOSMIO in my home theater equipment. But I don't know how to use the SPDIF output. This output is common with analog headset, so I think I should do a this port configuration (software)...
    My questions are:
    -Should what type of cable/connection I use?
    -How the correct configuration of this output to get the digital sound signal?

    Thank you for your advice.

    Hello

    Well, the S/PDIF Jack allows you to connect digital speakers or stereo headphones (minimum of 16 ohms). When you connect a digital speaker or the headphones the internal speakers is automatically disabled.

    Please visit this link. You will find the cable that you can use:
    http://www.impactacoustics.com/categories.asp?cat%5Fid=900

    Useful information on a S/PDIF cables and technology:
    http://www.epanorama.NET/documents/audio/SPDIF.html
    http://www.interfacebus.com/SPDIF_Audio_Interface.html

    Good bye

  • M30-832: Questions about memory and DVD player

    Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
    1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

    2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

    Thank you very much

    Hi Richard,

    From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

    You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

    Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

    You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

    HTH)

  • Question about phone and / or Android 1.5

    I have a question or a statement that needs confirmation. If someone could be good enough to help out I'd appreciate it.

    I am a heavy Texter and text on a daily basis, probably an average of about 250 + texts per day. Also, I noticed and I took County, after about 4 hours of texting the android keyboard and also the swype keyboard, affecting the time key to key response starts to slow down and get slow and ultimitely is unbearable to the text with. Even with the home screen and sliding screens from left to right, and as I said it doesn't happen only after some hours of use of the phone. So, I have to restart the phone and repeat for it keep to become lazy and unbearable to text with. I usually reset every morning or when I wake up. This is nothing compared to my sisters Mytouch, which is in fact older than my phone, it can affect his day at the time and not get done with the delayed touch response. I also noticed that his phone is running Android 1.6.

    Now my concern is, if I'm the only one knows this or is it due to a defective phone. What is the Android obsolete 1.5 that many people are talking about who is performing on the phone in this way.

    Basically, it's because of 3 things.

    1. history - more history, more than it takes to load. (If you wipe all messages and try again, you'll see what I mean)

    2 android 1.5 - don't know what the reason, but even on 1.6 devices SMS language delay is AVERAGE less.

    3 Swype - if you have enabled, it tends trolling more than the default android.

    It is not your phone, it's all phones Cliq/Cliq XT... 1.5 hate text messaging.

    In addition, your phone will work more effectively without a task manager. They are nice to have if you need something CF or to extend the life of the battery (no), it actually takes your phone like some processes that would otherwise, and you also have the risk of frost on the phone all together because some group programs are essential and cause the home screen all recharged after their closure. I would like to refer to this site in order to better explain.

    http://tiny.cc/00s5a

  • A question about html5 and Tablet

    Hello I am new to the world of mobile programming, I participate in the blackberry challenge Colombia, my question is: for the playbook, what is the command to rotate the screen on my site? and I guess I have to set a new stylesheet CSS for this configuration, thank you

    What do you mean rotate your screen? The default value is auto rotation (depending on the angle of that user is holding). Settings in the config.xml file allow you to fix orientation landscape or portrait mode.

  • Question about Design and wireless controller

    Hello world

    Although I am not new to Cisco, I have some limited experience with Wireless in general.  I was hoping to get your help with the following:

    We currently have a total of 8 1130AG, 4 on each floor.  They have been set up a few years ago, and now we are looking to update the design a bit.  Each access point has its own SSID and just provide internet access.  Looking at the configuration, I noticed that they are not configured to use the appropriate channels, the channels just randomly (9, 10, 11, instead of 1, 6, 11, etc.).  I noticed that when I roam from one access point to another, I'm losing on 4-8 pings until I re - establish connectivity again.

    Here are my questions:

    1. do I need a controller in order to use one SSID for the entire installation instead of the seprate 8 of those currently?

    2 will be using controller providing a seamless transition when a customer places between AP?

    3. is it normal to lose connectivity around homelessness?

    4. can I reconfigure the current configuration to use one SSID and provide the best transition between the AP without the use of a controller?

    5. what controller that you would recommend?

    We didn't need anything fancy, I am aware that I can activate multiple SSID VLAN, etc..  Just tried to keep the simplest possible, even reliable.

    Your entry is appreciate.

    Thank you

    Need me a controller in order to to use one SSID for the entire installation instead of the seprate 8 of those currently?

    Yes a controllers will solve the problem. any case of autonomous ap try to use the feature "unique guest SSID broadcast.

    2 will be using controller providing a seamless transition when a customer places between AP?

    It will not solve the problem, but it depends on the type of config goes for the consolidation of the AP? Layer 2 roaming? Layer 3 roaming? etc.

    3. is it normal to lose connectivity around homelessness?

    No, you should same autonomous AP, check of overlapping channels

    4. can I reconfigure the current configuration to use one SSID and provide the best transition between the AP without the use of a controller?

    This can be a solution

    5. what controller that you would recommend?

    It depends on what is your need and how much access point you have? 4400 and WISN are most commonly used.

  • Adobe software, questions about upgrades and why creative suite 6 is not mentioned in my login?

    Hello

    1st question is why I can't find my creative suite 6 in the specifications of my account?

    2nd question, how can I upgrade my software, is it only possible by going cloud? or is it still possible the old way of mode as I'm used to go by downloading?

    concerning

    Philippe

    Hi Philippek,

    I'll try to answer your questions one by one:

    1: If you are not able to find your CS6 in your Adobe account, this means that you might not have saved it. In case you want to find your serial number, check this box. Quickly find your serial number

    2nd: CS6 is last & latest perpetual more offered by Adobe. Especially since you can choose our Creative Cloud products. To learn more about Creative Cloud, check this box. Software and services for creative professionals | Adobe Creative Cloud

    You can also view the available plans. Pricing and membership creative cloud plans | Adobe Creative Cloud

    Hope that answers your query.

    Concerning

    ~ David

Maybe you are looking for