QUESTION by RV180W: All traffic through the router is considered to be the router IP
Beta Firmware: 1.0.2.3
Of Web server log showing the problem:
2013-03-08 05:39:21 192.168.1.102 POST /somewebpage/somefile.htm - 80 - 192.168.1.1 - 404 0 0 6098 410 457
QUESTION: 100% of the traffic transmitted via the router takes the IP address of the router when it arrives at the web server level. In this case, 192.168.1.1
My mail server and FTP servers have adjustments because of the anti-hammering problem this creates.
Has anyone seen this problem and know of a fix for this?
@Cisco... Before you suggest that I have to call tech support, I already have. I just had the race and they told me to call level 2 support and do not provide me with a phone number. For some reason, he refused to escalate the call. He simply told me to contact a person of a previous issue, in which they gave me the beta firmware to download and I spent a lot of time on the phone to get there. I don't want to talk to the same person who spoke to my last question.
Yes, I have seen this problem and reported it. Should have the Bug ID CSCue49377, but I can't verify this, because I don't have access to the bugs database.
See https://supportforums.cisco.com/thread/2196509
Tags: Cisco Support
Similar Questions
-
Send all traffic through the vpn tunnel
Does anyone know how to send all traffic through the tunnel vpn on both sides? I have a server EZVpn on one side and one EZVpn client on the other. I'm not natting on each side. I use the value default 'tunnelall' for the attributes of group policy. On the client side all traffic, even if not intended for the subnet of the side server, seems to pass through the tunnel. But if I ping the side server, the same rules don't seem to apply. Traffic destined for rates aside customer through the tunnel, but the traffic that is not pumped on the external interface in the clear. That's not cool.
Hello
Clinet traffic to server through tunnel, that's right, right?
Traffic from server to client through tunnel, but the rest of the traffic is not, no?
This works as expected because in ezvpn, politics of "tunnel all ' is for traffic is coming from the client., do not leave the server.
Side server, customer traffic will pass through tunnel, the rest used.
Sian
-
How to send all traffic through the VPN, RV082 material v3
Hello
I found this guide to send all traffic to RV042 branch to the RV082 of central office:
But this guide is for the material of v2. I tried and did not work, so I wonder if there are new modules for hardware v3 (firmware v4.2)
I have a RV042 brach office connected through the VPN Tunnel work to a central office RV082. I want to route all traffic
Office of brach in the RV082 from the central office.
Thank you very much
Oliver
Hi Oliver, this is called esp wildcard forwarding (full tunnel).
Here are a few useful topics
https://supportforums.Cisco.com/message/3766661
https://supportforums.Cisco.com/message/3816181
-Tom
Please mark replied messages useful -
Tunnel of RV042 V3 that routes all traffic to the VPN
Hi all
I use Cisco Linksys RV-042 with V2 hardware to set up a VPN tunnel that route all traffic to the remote gateway (a Cisco ASA 5510). This configuration works very well, and I can access the local router and other resources to the central site.
I'm doing the same thing with Cisco RV042 with version V3 of the material, but I can't access the local router until the VPN breaks down. I can ' ping, SNMP the local router, or access but I can access the central site. Very strange.
Do you know what can I do to access the router local (for example, hardware V2) with connected VPN?
Thank you
Rafael
Just a hunch, but in the remote network you agree with what the network and subnet?
I've seen this symptom before.
LAN on the RV series.
10.10.2.0 255.255.255.0
Trust remote networks
10.10.1.0 255.255.248.0
It is traffic destined to the router on the 10.10.2.1 ip address is through the tunnel forward. So, for this purpose, you can only access the router LAN interface when the tunnel is out of service. I'm not sure why ping works but it does. I'm looking into this symptom on a different device, but the device has a similar graphical interface.
I would like to know if you have a similar setup.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - security
-
High utilization of the processor in Mode VSS when traffic through the internet.
Hi all
I have a problem with the installation of VSS. The VSS service install act as a central office switch of transit for internet traffic and the problem arises when there are about 600 Mbps of traffic through the switch. We notice that there are a lot of packages being softswitch and the rate is quite high, almost like 100 to 200 k per second.
The VSS switch manages ospf and BGP and have plenty of internet routing. After investigation of high CPU usage, I noticed that the AAGR switch is full and has tried to set the course of max mls to the maximum cef and restarted the VSS service.
Unfortunately, the problem persists after restarting.
We had planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.
If I fail the next step is to return to autonomous mode and hope that the processor will not pull up.
My Question: These step will prevent the issue? Suggestions or the reference similar to the problem I am facing in?
Hello Sophie,.
unless you have a PFC 3CXL and all the DFCs the AAGR 3CXL can manage only 256 000 IP prefixes and nowdays that complete a table is in order or 310-320 000 routes.
See
See table 1 in the second link it tells what I wrote in the first line.
> We planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.
You should not need the device after accepting only the default route in OSPF or BGP AAGR use will be greatly reduced this is just wait a few minutes (unless there is an underlying SW bug) for the MSFC to update CFP and then all DFCs
Hope to help
Giuseppe
-
Impossible to pass traffic through the VPN tunnel
I have an ASA 5505 9.1 running. I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.
Here is my config
LN-BLF-ASA5505 > en
Password: *.
ASA5505-BLF-LN # sho run
: Saved
:
: Serial number: JMX1216Z0SM
: Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
:
ASA 5,0000 Version 21
!
LN-BLF-ASA5505 hostname
domain lopeznegrete.com
activate the password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.116.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP 50.201.218.69 255.255.255.224
OSPF cost 10
!
boot system Disk0: / asa915-21 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain lopeznegrete.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
the LNC_Local_TX_Nets object-group network
Description of internal networks Negrete Lopez (Texas)
object-network 192.168.1.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
object-network 192.168.4.0 255.255.255.0
object-network 192.168.5.0 255.255.255.0
object-network 192.168.51.0 255.255.255.0
object-network 192.168.55.0 255.255.255.0
object-network 192.168.52.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.56.0 255.255.255.0
object-network 192.168.59.0 255.255.255.0
object-network 10.111.14.0 255.255.255.0
object-network 10.111.19.0 255.255.255.0
the LNC_Blueleaf_Nets object-group network
object-network 192.168.116.0 255.255.255.0
access outside the permitted scope icmp any4 any4 list
extended outdoor access allowed icmp a whole list
outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 741.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
outside access-group in external interface
!
router ospf 1
255.255.255.255 network 192.168.116.254 area 0
Journal-adj-changes
default-information originate always
!
Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.201.218.93
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
no use of validation
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
crypto isakmp identity address
Crypto isakmp nat-traversal 1500
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access insidea basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
username
username
tunnel-group 50.201.218.93 type ipsec-l2l
IPSec-attributes tunnel-group 50.201.218.93
IKEv1 pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e519f212867755f697101394f40d9ed7
: end
LN-BLF-ASA5505 #.Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:
packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail
(simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)
-
I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!
Hello
Troubleshooting with the monitor speakers sound problems
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01289551&LC=en&cc=us&DLC=en&product=3770742
Also try to update the drivers of his last.
I hope this helps.
-
Premiere Pro is not read all the video content in my AVCHD video. I know this because my computer plays all content through the Preview, so that the information is on the card. How the first to read all the content?
The first thing to do is to copy all the contents of your memory card to your computer and then import them into the body using the media browser in the body. Does it work?
-
route all traffic through wrt openVpn 1900ac Server
Hi all
I have been on this issue for a while now and I did not see any thread here who could help me
so, if this has been asked before I'm sorry...
so my question are as follows:
1 is it still possible to route all traffic to my (and get my public ip address of router) when it is connected to its virtual private network?
2. If possible, please explain how.
3. If is not possible with the can firmware OEM I use others supporting it?
Thank you very much in advance
Liran
The firmware Linksys OpenVPN solution allows access to your network resources, but there is no Internet connection.
Instead, you need to use OpenWRT firmware:
-
RV 320 won't internet traffic through the SMC modems
We have recently installed a RV320 to use primarily as a gateway for FTP traffic. The router is installed power 2 60/10 circuits of our Internet service provider who provided 2 edge of the MSC devices and which have Wifi capabilities and router. When connect on modems in factory default state the RV320 connects but does not take advantage of the double connections in terms of speed. When disable us the wifi modems and router running the RV 320 connects but do not traffic through to the modems.
Since the two modems are identical, we get the same news IP and gateway of each. I would prefer not to have the modem in router mode. Is there a setting on the RV that will connect and pass internet traffic with modems in mode 'dumbed down '.
Graham Saywell
Wanted to sound and image
Toronto
Hi Graham,
The best scenario is to have both SMC routers on bridge mode and configure both on RV320 WAN interface with (PPPE, static IP, DHCP... He expense of your WAN connection)
Can you please share with us what kind of WAN connection you use in the SMC routers?
-Ensure the RV320 you have the latest firmware 1.1.0.09, otherwise you can download it from this link:
-On RV320 under the management of the system--> Dual WAN and check Load Balance
-After that, you set up the RV320 with the same type of WAN connection as a router SMC and SMC router mode Bridge and in this case, you should see the two public IP on RV320 of audit system summary
If you do these steps and still you can not the public IP address RV320 and the SMC router in Bridge mode, please share with us the configuration file RV320 and screenshots of two CMS about the WAN configuration
If in the case the SMC router does not have the option of working in Bridge mode, in this case, you will need to have the local of the SCM with subnet different e.g. 192.168.1.1/24 and other a 192.168.2.1/24
on RV320 you can leave the configuration in DHCP on both WAN Ondaaah (if you have the DHCP Server enable SMC router) or you can configure the static IP address on the two wan
* Please answer question mark or note the fact other users can benefit from the TI *.
Thank you
Mehdi
-
PIX stops passing all traffic at the entrance to command crypto
I have a strange problem with a PIX 515 6.1 (2).
I have 3 VPN tunnels already implemented. While trying to set up a 4th the PIX stops passing all traffic. He arrives precisely when I enter ANY command "crypto map.
cancellation of the order by using "no card crypto...". ' or "clear xlate" is no help either. The PIX must be restarted before the traffic going on again. The CPU usage drops to zero and my telnet for the PIX session remains connected.
Anyone have any ideas?
I put the relevant configuration below:
172.50.0.0 IP Access-list sheep 255.255.0.0 allow 192.168.0.0 255.255.0.0
172.50.0.0 IP Access-list sheep 255.255.0.0 allow 10.0.0.0 255.0.0.0
acl_vpn1 ip 172.50.0.0 access list allow 255.255.255.0 192.168.0.0 255.255.0.0
acl_vpn2 ip 172.50.0.0 access list allow 255.255.255.0 10.0.0.0 255.255.255.0
acl_vpn3 ip 172.50.0.0 access list allow 255.255.255.0 10.50.0.0 255.255.255.0
NAT (inside) 0 access-list sheep
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac support
toVPNs 10 ipsec-isakmp crypto map
card crypto toVPNs 10 correspondence address acl_vpn1
card crypto toVPNs 10 peers set 1xx.xxx.xxx.xxx
support toVPNs 10 transform-set card crypto
toVPNs 12 ipsec-isakmp crypto map
card crypto toVPNs 12 match address acl_vpn2
card crypto toVPNs 12 peers set 2xx.xxx.xxx.xxx
support toVPNs 12 transform-set card crypto
toVPNs 14 ipsec-isakmp crypto map
card crypto toVPNs 14 correspondence address acl_vpn3
card crypto toVPNs 14 peers set 3xx.xxx.xxx.xxx
support toVPNs 14 transform-set card crypto
toVPNs interface card crypto outside
ISAKMP allows outside
ISAKMP key * address 1xx.xxx.xxx.xxx netmask 255.255.255.255
ISAKMP key * address 2xx.xxx.xxx.xxx netmask 255.255.255.255
ISAKMP key * address 3xx.xxx.xxx.xxx netmask 255.255.255.255
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
1 1 ISAKMP policy group
ISAKMP policy 1 life 43200
Hi Ishaq,
Please make sure you remove the card "Crypto" off the coast of the Interface by doing a ' no card crypto toVPNs no interface out ' and then add the necessary commands before reconnecting the Crypto map. Usually when we add a new command "toVPNs xx ipsec-isakmp crypto map" without removing the Crypto Card it starts encrypt all traffic passing through the PIX. After you make the required changes, reapply card Cryptography.
Hope this helps,
Kind regards
Abdelouahed
-=-=-
-
Tunnel traffic through the Access Point
I "tunnelenabled" in the parameters of Access Points of JSON: true;
And on the Access Point associated connection servers config guide recommends not allowing the tunneling.
The end result is that the traffic is going through the Access Point and not crossing does not connect to the server. The client wants to keep the absolute minimum for the ports open between the objects, so I want to tunnel traffic from the Access Points through the connection to the server, and then click the virtual and physical machines internal who installed the agent to view. Even when I check the options of tunnel on the login server it always appears as if traffic is bypassing the broker for the connections and go straight to the agents.
What the configuration change that I do have all the traffic goes through the access points and associated connection servers?
Thanks in advance for any help or suggestion-
J
After a lot of trial and error reduced us to certificates that we created for Access Points. HTML5 Blast Bridge did not have other names of the object in the cert. Once we gave them a cert that had the URL and not the SAN (subject alternative names) with the real access Point server names that Blast started working again.
-
Why cfstat still poster reqs qued even when it is not all traffic to the site?
I try to use cfstat to help understand some performance issues with our production server. Its CF 10 Ent on a Windows 2008 VM. I'm also 10 ColdFusion installed on a local Windows VM.
I run cfstat with a 1 Refresh second on the local production and the VM server. The local VM Reqs Q column ' ed shows a constant 10 even if I'm not hitting all sites on the server. The production server shows a constant 20-Reqs Q'ed and some Run Reqs'g.
Is this normal? I have to make some adjustments to the CF or the JVM?
Thank you
Hi Phil,
CF10 CFSTAT seems not to be as convenient as CF9 or earlier version.
Requests queued seems to be displaying the value of tomcat for minSpareThreads connector. Tomcat minSpareThreads is the minimum number of threads still kept running. If not specified, the default value of 10 is used.
HTH, Carl.
-
No traffic through the VPN tunnel but at the same time
Hey everybody,
Good enough at the end of my VPN configuration but I have a question. The VPN connection is established and the remote computer can set up a VPN with my router (phases 1 and 2 are ok) but I can't ping all devices on both sides. I think it might be something about the acl. I created an acl that I linked with my group of vpn, what should I do something with the card?
Here is the configuration of the router
AAA new-model
!
!
local AuthentVPN AAA authentication login
local AuthorizVPN AAA authorization network
!
AAA - the id of the joint session
clock timezone GMT 1 0
clock summer-time recurring GMT
!
IP cef
!
DHCP excluded-address IP 192.168.0.1 192.168.0.99
!
Authenticated MultiLink bundle-name Panel
!
VPDN enable
!
VPDN-group MyGroup
!
!
model virtual Network1
!
username admin privilege 15 secret 4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
!
redundancy
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
life 3600
!
ISAKMP crypto client configuration group myVPN
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx key
DNS 192.168.0.254
pool IPPoolVPN
ACL 100
!
!
Crypto ipsec transform-set esp - aes esp-sha-hmac T1
tunnel mode
!
!
!
crypto dynamic-map 10 DynMap
game of transformation-T1
market arriere-route
!
!
list of authentication of crypto client myMap AuthentVPN map
card crypto myMap AuthorizVPN isakmp authorization list
client configuration address map myMap crypto answer
card crypto myMap 100-isakmp dynamic ipsec DynMap
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
no ip address
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
No mop enabled
!
interface GigabitEthernet0/1
LAN description
no ip address
automatic duplex
automatic speed
No mop enabled
!
interface GigabitEthernet0/1.1
LAN description
encapsulation dot1Q 1 native
IP 192.168.0.254 255.255.255.0
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
interface Dialer1
MTU 1492
the negotiated IP address
IP access-group RESTRICT_ENTRY_INTERNET in
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP chap hostname xxxx
PPP chap password 0 xxxx
PPP pap sent-name of user password xxxxx xxxx 0
crypto myMap map
!
IP pool local IPPoolVPN 192.168.10.0 192.168.10.100
IP forward-Protocol ND
!
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
The dns server IP
IP dns primary GVA. SOA INTRA NS. GUAM INTRA [email protected] / * / 21600 900 7776000 86400
IP nat inside source list 10 interface Dialer1 overload
overload of IP nat inside source list 11 interface Dialer1
overload of IP nat inside source list 20 interface Dialer1
overload of IP nat inside source list 30 interface Dialer1
overload of IP nat inside source list 110 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1
Route IP 192.168.0.0 255.255.255.0 GigabitEthernet0/1.1
IP route 192.168.1.0 255.255.255.0 GigabitEthernet0/1.2
!
RESTRICT_ENTRY_INTERNET extended IP access list
TCP refuse any any eq telnet
TCP refuse any any eq 22
TCP refuse any any eq www
TCP refuse any any eq 443
TCP refuse any any eq field
allow udp any any eq 50
allow an ip
!
Dialer-list 1 ip protocol allow
!
!
SNMP - server RO G community
public RO SNMP-server community
entity-sensor threshold traps SNMP-server enable
access-list 10 permit 192.168.0.0 0.0.0.255
access-list 11 permit 192.168.1.0 0.0.0.255
access-list 20 allow 192.168.2.0 0.0.0.255
access-list 30 allow 192.168.3.0 0.0.0.255
access-list 100 permit ip 0.0.0.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
access ip-list 110 permit a whole
I don't know if it useful, but here is the view the crypto ipsec command his:
Interface: Dialer1
Tag crypto map: myMap, local addr 213.3.1.13
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.10.12/255.255.255.255/0/0)
current_peer 109.164.161.35 port 49170
LICENCE, flags is {}
#pkts program: 5, #pkts encrypt: 5, #pkts digest: 5
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors
local crypto endpt. : 213.3.1.13, remote Start crypto. : 109.164.161.35
Path mtu 1492 mtu 1492 ip, ip mtu BID Dialer1
current outbound SPI: 0x54631F8B (1415782283)
PFS (Y/N): N, Diffie-Hellman group: no
SAS of the esp on arrival:
SPI: 0x8C432353 (2353210195)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2033, flow_id: VPN:33 on board, sibling_flags 80000040, crypto card: myMap
calendar of his: service life remaining (k/s) key: (4212355/1423)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x54631F8B (1415782283)
transform: aes - esp esp-sha-hmac.
running parameters = {Tunnel UDP-program}
Conn ID: 2034, flow_id: VPN:34 on board, sibling_flags 80000040, crypto card: myMap
calendar of his: service life remaining (k/s) key: (4212354/1423)
Size IV: 16 bytes
support for replay detection: Y
Status: ACTIVE (ACTIVE)
outgoing ah sas:
outgoing CFP sas:
And on the side of the customer, when I go to the status of--> statistics, all packages have been circumvented, nobody is encrypted
Thanks for your help!
Sylvain,
Let me explain again:
IP nat inside source list 10 interface Dialer1 overload
overload of IP nat inside source list 110 interface Dialer1
Here you are from two ACL, but they are the same with the difference, that NAT 10 110 also but WITHOUT user VPN and everything inside. Problem is that 10 matches first, if the connection will not work. You can disable entry NAT with 10 110 because that will also:
no nat ip inside the source list 10 interface Dialer1 overload
That should be enough.
Michael
Please note all useful posts
-
Problem passing traffic through the VPN tunnel
With well over 150 VPN lan-to-lan tunnels configured, I can usually get tunnels upward. However, this one is stumping me, unless the ISP is to give false information. Using a router Cisco 871 on-site a Cisco 3005 concentrator in my data center, I have set up my tunnel. The tunnel will go up but won't traffic. I am sure that the configurations on both devices are correct because I use a lot of "cut-and - paste." So, the only question seems to be the modem/router provided by your ISP. Usually, when this happens, the problem is with NAT enabled on their equipment. According to them, that it is not enabled on their NAT router. Where can else I check? Any ideas?
Check access lists and a static route
Try these links: >
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a00800949c5.shtml
Maybe you are looking for
-
used to synchronize my Ipod in windows 10
-
What are the SSD models used in T440/T440s? I see that the options are: 128 GB SSD180GB SSD OpalEDrive SSD 256Go240GB SSD Opal512 GB SSD I would be grateful if someone could list the specific brands/models for each SSD option. Also, it would be good
-
Bad Windows 7 Upgrade Advisor program
Do NOT RUN THIS PROGRAM - Windows 7 Upgrade Advisor http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor I ran this for 2 1/2 hours, he never finished, basically hung up yesterday, so I cancelled it. Launch Windows XP Pro. Then when
-
HP Envy 13 t-1000 CTO Notebook: upgrade memory for VK918AV (HP Envy 13 t-1000 CTO Notebook PC)
Is it possible to (reasonably) to upgrade the memory on these laptops? The guide of the online maintenance I found indicates that there is 1 GB on the system board and supported a location of memory that supports up to 4 GB, but it is referenced as
-
I installed a media player from a third party, and when I uninstalled it, I clicked YES to delete all files attached to it. After that, I am unable to open all the files or upload files to try to solve the problem. Can anyone help? Thank you