Question connects to the password reset on Tablet

I forgot the password for my tablet. Apparently, this requires a password reset disk to change it, but since I obviously can't log my tablet, I had to create it from my laptop. This does not seem to have worked, and the steps seem to imply that, in order to change the password, I need to create a password reset disk for the Tablet, and the password reset disk I created on the laptop can be used only to reset the password on the laptop. These two options are obviously really stupid. My question is, how do I reset my password?

Andy

What password?  If you're referring to your ID from Microsoft, you must go to the secure online form, because they are the only ones who have access to your account

Given that the account of emissions contain confidential information, you must use the below secure support portal. They are the only ones who have access to your account information, we simply don't have.


The forum has Microsoft has been removed and all associated accounts must now wonder online by using the Microsoft online form


Select the error you must help with and fill in the information requested on the next page.  You must be connected to a Microsoft account to access the form.
If you are unable to access your main account, you can use another account (if you have one) or create a new one https://signup.live.com/

Tags: Windows

Similar Questions

  • A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

    Community salvation.

    Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

    A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

    Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

    I searched and found several articles with similar questions, so I chose a course of action

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

    http://communities.VMware.com/message/1168241

    As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

    So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

    Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

    Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

    If - goes here - any ideas? I can give other details or screen caputres

    ESX3:

    #%PAM-1.0

    1. Automatically generated by esxcfg-auth

    /lib/security/$ISA/pam_unix.so account required

    AUTH required /lib/security/$ISA/pam_env.so

    AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

    AUTH required /lib/security/$ISA/pam_deny.so

    attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

    shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

    /lib/security/$ISA/pam_deny.so password required

    session required /lib/security/$ISA/pam_limits.so

    session required /lib/security/$ISA/pam_unix.so

    ESX4

    #%PAM-1.0

    account required pam_per_user.so /etc/pam.d/login.map

    AUTH required pam_per_user.so /etc/pam.d/login.map

    /etc/pam.d/login.map pam_per_user.so password required

    /etc/pam.d/login.map pam_per_user.so sign in required

    -KjB

  • reset the password reset disk

    Watch to see how rest the password on a Pavilion slimline desktop p 3521

    Juvenal wrote:

    Watch to see how rest the password on a Pavilion slimline desktop p 3521

    You would have needed to make the password reset disk before you have forgotten the password.

  • Live ID questions I forgot the password, can't reset it.

    I have a live e-mail account I created for me and my son XboxLIVEConditions tags player. I never use the e-mail account and set it up only because of the requirement of the xbox. As I put in place, I forgot the password, can't reset it, or get hotmail to help me in any way. The functionality to post a question or reply to another email not brought results. Xbox live will not help and my son is locked out of his account live xbox until obtaining a password. Is it possible to get help for this problem, beyond their hotmail wrong online help site?
    I spent hours with the xbox live customer service and try to get this resolved through Live.com. I'm so disgusted with this whole thing, where the customer has disappeared?

    Hello ChristianSheehan,

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • After the password reset. Able to connect with the old and the new OAM password.

    Hi all

    I have it here's the installation program.

    OAM - 10.1.4.2.0 (BP08)
    OVD - User store
    Advertising - Store configuration and policy.

    Here's the scenario.

    I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.

    But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.

    Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?

    But, it allows to connect to the User Manager with the old password and the new password.

    Please let me know your comments.

    Thank you and best regards,

    Siva NAKI.

    Hi Siva,

    If the announcement is you user store (even through OVD) then this could be a function of Microsoft:

    http://support.Microsoft.com/kb/906305/en-us

    Kind regards
    Colin

  • BlackBerry smartphones, how can I recover the password reset email to Blackberry ID

    I am currently locked for access applications to a blackberry ID. I used the links to reset the password and got a message to say that an email was sent to my e-mail address of blackberry but for safety it will not be sent to my phone. I don't know how I can retrieve this e-mail message. I just want to reset my password ID, all the solutions?

    Yes, is not good, because those email accounts are not available on the smart phone BlackBerry itself; in other words, you cannot connect to an account webmail from a PC and a view.

    It must be remembered the BlackBerryID password or secret answer to the question. Without either, you're stuck.
    Your choice is:
    -Use a different e-mail account to create a new BlackBerryID (with which you will lose access to all apps purchased using the 'forgotten' first BlackBerryID, or)
    -Find the initial email you have been sent to confirm the initial BlackBerryID and there are a link to click to cancel and delete the account. Click on this, delete the account and then you can use that same e-mail to create a new account.
    Good luck.

  • My password does not work and I do not receive the password reset email.

    I tried to set up Firefox sync and set up a username and password. I received the email to check and checked. When I tried to access my account in firefox, it says that the password is wrong. When asked to reset the password, I don't have the reset password email. I tried to set up a new account, but Firefox has said that there is already an account with my email address. So, what to do next?

    Are you talking about this web site, the site of the add-on, sync? Each is a separate
    account. If you connect with others, only one password, not good.

  • I can't connect using the password I created

    I bought my kids a touchsmart 520 for Christmas with windows 7 installed, which was installed by my son and it was YouTube that day.  The next day he tried to connection and the message that the password is not recognized I tried to reset and it asks me to insert a disk or a flash drive which I did not and I can not find were the diskette goes, I tried a blank dvd disc and nothing happens.  I tried to get the password in lowercase, uppercase and with and without spaces, with keyboard and screen and nothing, if I don't know how to get into the machine to create a new password, I have to take back to the store

    As it is brand new and you do not have the files saved, you could just do a reinstall of the operating system by typing away at the F11 key after turning on, as soon as the HP logo screen appears. Who will put it to factory.

  • HP OfficeJet Pro 8610: 8610 does not connect to the password protected network (but connects to the unprotected network)

    I had a HP 8600 that connected to my WiFi at home.  It broke and I replaced it with a HP 8610.  When I try to connect the new printer to my WiFi at home, it is not identifying the printer in the search process.  I have searched the forums and tried to correct the problem and nothing works.

    HOWEVER, I've set up a WiFi comments without password protection and when I am connected to this network, the HP software recognizes the 8610 and I can install it.

    I hope that the foregoing will provide enough information to identify the source of the problem and a solution (easy) (?).

    Thanks in advance for your help.

    -JW

    Hi @JDWUser,

    I'd love to help you with your 8610 replacement printer. I understand that you had the 8600 on your network, but the 8610 will configure not to password protected network. I recommend you to go through this guide How to find the WEP or WPA key or the password of your wireless network, just to check your wireless password.

    Is your password contains special characters that maybe the printer does not? Are adjust you upper and lower case? I know that you explained that your password has not changed and that the printer has been configured successfully on the network before, I'm just trying to isolate a potential cause.

    Restore the default network on the printer then rerun the wireless Assistant might help.

    What is your type of encryption, and who is your supplier of router?  I saw a problem recently with WPA2 secret codes, but this issue seems to be from some routers and firmware updates.

    Please do not forget to keep me informed of the outcome of your efforts in order to contact you, and don't forget to post back with the asnwer the questions I asked. Thanks, I look forward to hear from you.

  • You have attempted to connect with the password wrong too many times. Please try again later.

    I think I tried something like 4 - 5 times. Then I reset the pwd. After the reboot, the message appeared (the counter needs to be reset too once I reset the pwd). If only the system would have said e more soon as I have a few attempts I would have been more careful when you type in the pwd (I could remember, so I tried a bit of my common pwd).

    Now I can't use my account, and I would like to know what "try again later" means exactly. Next time? Tomorrow? Next month? I have a kind of urgent need of making an international phone call. Unfortunately with a motive to the Japan is bit tricky and I could still not managed to get a. I was hoping to use Skype, but it seems that the only option I have is to find somewhere near a public phone in the room.

    OK, I was able to post so the password worked now.

    Can delete the whole post.

  • How can I reset my password without the password reset disk?

    because I can't reset my password on my brand new computer, what should I do with it, just throw it away?

    Hello

    The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

    Keep secure passwords - Microsoft strategy on move the passwords
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    Microsoft's strategy concerning password lost or forgotten (KB189126) - has the help
    http://support.Microsoft.com/kb/189126

    What to do if you forget your Windows password (Vista and Windows 7) doesn't help
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

    What to do if you forget your Windows password (Windows 8 and 8.1)
    http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Computer HP model # DV7-3162NR, cannot connect when the password is entered

    After typing the password is a statement saying, "can't logon user profile Service service". What can be done to correct and go to the line.

    Thank you

    Hello

    You can try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • How do I erase all user accounts when the admin password forgotten and lost the password reset disk?

    Me and my girlfriend bought someone's Office to his work and the admin has forgotten his password and the user to reactivate remind her and we have been able to remove his password and we can not get his password reset.

    Frankly - regardless of the many ways of hacking, it - format (I would even zero-write of disc/low level format her) and install the operating system and all applications that you PROPERLY.  You have no way of knowing what he remained there from the previous user and probably don't want to know/take the chance.

  • IOM 11 GR 2 - way to propagate the password reset to target resources

    Hi experts,

    While during the creation of the account, IOM login ID and password are correctly used to set up accounts,

    I've done a few passwords reset on users of the IOM, and I found that the new passwords are not automatically propagated to resource accounts.

    These resources are provisioned by standard STANDARD connectors as DBUM.

    How can I work, so all the passwords on all resource accounts are synchronized down to resources of the IOM during password reset?

    AAMT

    Looks like change it user password process task is not defined for this STANDARD connector.
    As a solution, we can:

    1. create an adapter named ValueCopyAdapter of type "process task.

    2. in the adapter, add a string named 'pass' variable and set it as resolve at run time

    3. Add a 'logic' task in the adapter of type 'SET the VARIABLE.

    4. map of the "return value of adapter" to the variable 'pass '.

    5. build the adapter

    6 open the definition of process "Oracle DB User", add a conditional 'Change User Password"process task, and plug the adapter (adpVALUECOPYADAPTER) created earlier on the integration tab.

    7. also need to check "allow multiple Instances".

    8. on the integration tab, map the adapter of the variables as follows:

    Map the input value 'pass' to the qualification of the definition of the user password.

    Map the return value to the qualification of password process data.

    9 save the task in process

    HTH

  • problem connecting via the password file

    Hi all

    I'm using oracle 11g release 1 on CENTOS LINUX 5.
    I have a problem with the connection AS

    connection on OS authentication is successful

    SQL > connect sys as sysdba
    Enter the password:
    Connected.
    SQL >

    but when I connect from the file of passwords as
    SQL > connect sys/oracle@stan as sysdba
    ERROR:
    ORA-01031: insufficient privileges


    SQL >

    I created the new file password as

    orapwd file=$ORACLE_HOME/dbs/orapwSTAN.ora password = entries = 5 oracle

    opertaing authentication system are given as

    [oracle@testserver ~] $ id
    UID = 500 (Oracle) gid = 500 (oinstall) groups = 500 (oinstall), 501 (dba) context = user_u:system_r:unconfined_t

    any help is appreciated

    The name of the password file is not random.
    The SID is case-sensitive, and the UNIX password file has No extension!
    So if we're not the file name, the passwordfile will not be used.
    This file name looks bad, at least the .ora bit should be removed.

    -----------
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for

  • connection Keyring

    I was watching the keychain in Keychain Access logon and there are more than 500 key signature imessage looks demi-prive and half public. My question is - is this normal? I've only used messageing text 10 or so times.

  • Need to access Mac files

    I don't have my MacBook Air more, but I need to get the files. I only have 10 Windows allotted to me. Is there anyway that I can get the files without the Mac needed?

  • Problem with installation 7520 - drivers missing and scanner does not

    I have a HP Photosmart 7520.  The scanner has stopped working.  I uninstalled and reinstalled the drivers and full software features.  It still does not work.  I ran the HP print and Scan doctor.  He said pilots were missing and reinstall.  I've made

  • My screen freezes and turns different colors?

    My computer has been freezing for a while now. The screen of the monitor turns of different color, for example in my training a photo of a Tiger so I when it freezes my screen turns orange. If I watch a video or something, it turns out whatever color

  • Why the shortcut for Pogo on my desktop to open my google home page?

    I don't know why the shortcut on my desktop is no longer open Pogo. Now the yahoo home page opens when I click on pogo. What can I do to fix this?