Question Express/Extreme Cox Communications and airport

Similar Questions

• Airport Extreme and Airport Express remove blackheads effectively.  The Eeco seems a better solution.

  Airport Extreme and Airport Express do a bad job to expand the WiFi connection in a House.  The Ethernet port on the Airport Express doesn't seem to work.  The Eeco product seems to have done a better job to extend a Wi - Fi network in a home.

  You posted your comments as an issue. You have a question or a problem that you want to get help related to Apple network so that we can try to help you to?

• AirPort Extreme and airport express bought in Europe will work in the United States?

  AirPort Extreme and airport express bought in Europe will work in the United States?

  Airports will work on 100-240 Volts and 50/60 Hz, so they'll work wise power, about anywhere in the world, assuming that you have a power adapter to change the European plug to a US plug.  A voltage converter is not necessary.

  European wireless operated from 1-13 and the United States channels 1-11, so you will need to make sure that you use 1-11 If you want other users to be able to connect to the wireless signal.

• Can iTunes be listened to using non-Apple (Airport Express/Extreme example) devices?

  Hi guys, my first question to the forum and hope you can offer some advice.

  One of my friends would like to extend his network wi - fi wireless and listen to their iTunes library throughout the House. It has a large router broadband modem/hub and BT Infinity2. I was going to suggest linking an Airport Express and Airport Extreme solution to install broadband from BT, but in the case where it is costly to use non-Apple devices to stream music from iTunes?

  Any help greatly received.

  All my best

  Wuidar

  can I use non-Apple devices to stream music from iTunes?

  Much would depend on what device you want to listen to music to. Is - this AirPlay device is capable?

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• Airport Express had not cooperated and TC?

  I got my TC and Airport Express for a few years now without any problems.  Recently, no known changes, I could no longer connect to my wifi/internet. After that everything in that I can get troubleshooting, it's when the TC and AE are physically connected to my my wifi internet network and stop working.  When I have either connected by themselves the internet and wifi works very well.  My setup as follows:

  Router & Verizon Fios Internet Service

  Airport Express hard wired to the Fios router

  Time Capsule hard wired to the Fios router

  I have updated firmware on TC and AE today and no luck.  Any ideas on what might be the cause?

  Thank you!

  Reset both the TC and Express to plant and restore the configuration.

  Make sure that both are in bridge mode... and get IP address valid for the FIOS router.

  If you are roaming network then both TC and Express needs to create a wireless network of the same name and same level of security / password.

  If you still have questions, post screenshots of the installation.

• Extend the reach of the WiFi with airport Time Capsule and Airport Express

  I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

  What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

  Help, please.

  If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

  We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• using hotspot as a provider of Internet services to delay questions express airport

  I have an Airport Express 2nd generation. I've set up as a home network with no ISP due the fact that I can't get an ISP where I live. I use it for connectivity to all my other apple and mac products, over some generic devices. I go through the implementation of change the settings to ignore the Internet LAN Ethernet, allowing me to have my network. So this is where it gets me confused after a few hours or a device is disconnected. So to continue. Then I take my Netgear wntce2001 streaming single channel device/path/device that I bought. now only available as a wntce2003 dealer local. I go into my menu of the hotspot browser, (Netgear 779 s aircard) and access my WPS in place. The Netgear wntce2001 at this stage only powered with one reset fees, like its new. Push button WPS on my Netgear select wntce2001 WP / parring on my browser and let them connect. At this point the Airport express will amber. Using AirPort Utility I get the double NAT message with options to switch to bridge mode. It all works very well. Now I can use all my Apple products to get on the line and play my generation 4 Apple tv, etc etc. Here's the problem when I remove my Hotspot or it turns off. I'm locked out/unable to join my ISP network wireless access point, that I created.  my book pro Mac will recognize is no longer the Hotspot may not use a web browser to access my hotspot and any other personal devices or belonging to my friends can see or access the HotSpot. Until I drive a half-mile away with her. Or perform a Factory reset fresh out of the box on my Airport express. Even if I remove the hotspot (short drive) then back it's always invisible until I get back from the Airport express. Once I reset the AirPort Express and reset all my other devices. I can rebuild the network and use it as I'm writing this Question (letter). Is anyone know why and how I can solve this problem. In short having a provider. Hotspot demographically impossible only internet access...  Thanks to an old man persisted.

  If I were in your situation... the first thing I would do, is check the wireless internet provider, which is an ISP btw... If they can sell you or recommend a router Ethernet instead of a hotspot. An access point has loads of limits and is not very well at all apple hardware.

  I confess that reading your description of how make you it work, it does not look good.

  I suspect that one of the main issues is the limited number of intellectual property which generally offer wireless ISPS... 5 is the common number.

  You are really not on the express of all... the devices are connect to the hotspot... and when something happens, you have exhausted all of the IP addresses.

  In any case we can begin to do some tests to prove it.

  Please post screenshots of the current configuration of the express with all this work to your satisfaction,

  I need the page summary of airport utility. That is to say it.

  

  Click on the button to edit, and then give me the Internet tab, tab wireless and Network tab screenshots.

• Extend an AirPort Extreme with a Terminal AirPort Express increasing the number of users?

  I have an AirPort Extreme 2 years ago. Based on the technical page of the product, the router can theoretically connect up to 50 users. That's more than enough if used at home.

  However, I intend to deploy a network of airports in our new office building and we have more or less 50 employees. Because everyone has a smartphone that it needs to connect, I try to at least 100 users/devices. Which includes all the network printers. Obviously, an AirPort Extreme is not enough. Another thing, I have considered is that the office building is 2 floors and all the walls are made of concrete, which means the distribution of the wifi signals is affected.

  I thought to extend an AirPort extreme with 3 more AirPort Expressare (mobile network). It's 2 APs on each floor. That should solve the problem of distribution wifi. I'm not sure the first problem - 100 or more devices into a single network.

  So extending an AirPort Extreme with 3 more AirPort Expressare (making a roaming network with 4 access points) increases the number of potential users of 50 to 200 (assuming that each access point can connect to 50 users)?

  In theory, Yes.  But you must take this specification of 50 users with a grain of salt.  Once there are 20-25 users on the same airport access point, things will slow down significantly. The system will operate as of cold molasses with up to 50 users on the same access point.

  Quite frankly, in a business application, you need a software router. Apple routers are designed for home use.

  Another way to say the same thing, is that Apple does not routers Apple at the Apple Store. Who could tell more than anything whatsoever about the suitability of the products in your proposed network.

  My advice would be to get an IT professional in and review your needs... before you move further.

• Can I extend my Airport Extreme 6 with an Airport Express A1264?

  Can I extend my Airport Extreme 6 with an Airport Express A1264?

  I've just set up my new Airport Extreme 6.

  I used to have an Airport Extreme 1 (persist, but currently unused).

  • with an Airport Express base station 1 (A1264), which is connected to
    • My usb printer
    • a gadget of cisco to help my ATT cell service

  I can't understand how to add the Express on the network.

  Any suggestion would be appreciated.

  Thank you

  Brad

  The Airport express does not appear as a device listed to select.

• BDP-S570 and airport extreme

  Hello! Just hooked up my new player and can't join my wi - fi network. I have an Apple Airport Extreme (1st edition, 802. 11 g). The blu - ray player sees the end network, good signal strength, but when I put my password it says "the number of characters is invalid. Please check your entry and try again. »

  I use the same password I use to access the network on my computers, iPod touch etc. He uses it's WEP security protocol. ISP is Comcast, have the modem to bike and airport base station. Computer laptop connection very well etc. The player actually claims security WEP "key"; is it not my wireless password? Any ideas? Thank you!

  Santos L. Halper

  Solved. See messages in Apple Discussions:

  http://discussions.Apple.com/thread.jsp... 5 #12907765

• I look at apple tv in illinois, with service from comcast.  but, I'm moving to arizona for 3 months and cox communications is the cable operator. I always look at my apple tv?

  I look at apple tv in illinois with comcast as my ISP.  I'll be in arizona for three months.  Arizona cable provider is cox communications.  is it possible that I can watch apple tv on a big screen tv?

  As long as you have Wifi/ethernet your OK. Regardless of the name of the current provider.

• Airport extreme not recognized by airport utility

  Comcast serves intermittent internet Chronicle, which I think is part of the problem but not all that.  Their router is connected to my Time Capsule., which seems solid, but I've reconfigured several times due to my primary problem.  I bought a new wireless airport extreme (AEX) this year, model A1392 base low, but that has not helped, and in fact the question continues to worsen.  It almost ruined my Christmas day.   I use the AEX to listen to my itunes music on my stereo, as part of the network wifi househol, not a new configuration, and I have another in another room as an Extender that I speak of because it is less important, but has the same problem.  I want my music to work but the AEX continues to fall out of the network.  If I get the orange light flashes the only option I have given is to "Forget this device."  Of course, I wish that gave me the option edit and return to the network, but no.  Forget that the instrument is always bad, because Airport utility will NEVER recognize, any device I restarted many times.  If I go back to the factory settings, utility Airport will allow me to bring back the AEX in my wifi network, but comcast will then intermittent me the new AEX fell, this time with a green light fixed and Airport Utility NEVER acknowledges again.

  I don't know why it should be so difficult.  Apple isn't more fun.  My AEX should integrate easily and always in my wifi network at home.  What is the answer, please?

  What modem router do you have? Make and model please?

  What the Express installation?

  Please give me some screenshots of airport utility showing the contents page and the internet, wireless and network of the tabs.

  Since I understand what is wrong.

  Express does not and was never intended to be used as your main router. This is an auxiliary device to extend wireless, plug in the printer, airplay, etc..

  You more than probably a better router.

• Connect an Airport Express Terminal to a non - airport Cable Modem/Router wireless

  I want to use my Airport Express as a wireless adapter to connect my TV to my home wireless network. How to connect an Airport Express Terminal to a non Airport wireless router?

  Not sure I understand your question.

  If the AirPort Express Terminal will connect and 'join' the existing wireless network using a wireless connection... How the TV will connect to the AirPort Express?   Wireless?   Wired Ethernet connection?   USB connection?