Question: How can I format a PC running pre-installed windows Vista?

Similar Questions

• Question: How can I format Satellite A10 PSA10C - CD/DVD drive does not work

  Question: How can I format my laptop?

  The problem is that my CD-ROM does not work or it cannot read the CD.
  Help me guys and btw, is possible to format using USB Flash Disk?

  TNX in advance

  Model: PSA10C-035WM

  As much as I know with USB Flash Disk won't work.

  I really wonder why you don't buy replacement ODD. Compatible readers for this model of laptop old are more expensive. Replacement is very easy and you can do it alone.

  Wait a minute: you can remove the laptop HARD drive and connect to other PC / laptop as external one. If you can do what you want.

• question: How can I format my hp elitepad 900

  question: How can I format my hp elitepad 900

  Hello ahmapeace,

  Your ElitePad 900 is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• Question: How can I format my locked Windows 8 install USB?

  I got a USB key to install Windows 8 with my new laptop computer.

  Eventually put Windows 7 on it, if I want to use the drive for other things.

  Question: How can I format it?

  I see no unlocking switch.

  Thank you

  Mark,

  I can understand your situation.

  Given that these Dell USB, I wish that you contact them for assistance. You will also have options to upgrade to Windows 7.

• Question: How can I format a Jquerry file in DWCS6?

  Hola
  Question: How can I format a Jquerry file in DWCS6?

  I have a file Jquerry and is all the "crunch-up'

  I need to find something and change it.

  How is it is super hard to find.

  I know that it is a function on DW to do this, and I had

  Use it with CSS or HTML, but never with a file Jquerry

  Thanks a lot for your help

  Saludos

  Copy & paste your JS code in JSFiddle and press the TidyUp.

  http://jsfiddle.NET/

  Nancy O
  

• How can I disable smooth edges of fonts with Windows Vista?

  Please, please... I need help from someone obviously smarter than I am. I thought I was just on the pc, but I've proved very obviously I was mistaken.
  I would greatly appreciate any help someone could give me about the following question. I ' v tried the search with the help of Windows Vista, myself, but again, I'm obviously too stupid or slow down and have not been able to find the answer there either. He who can give me the answer, I would be so grateful, I got lov to reciprocate somehow I can, like research, graphics, or any work that I can because that would really mean a lot to me.
  So, here is my question:

  How can I disable smooth edges of fonts with Windows Vista?

  
  
  Bex

  Hello

  I suggest you to return the item and check if it helps:

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/ClearType-frequently-asked-questions

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I reset the time and date on Windows Vista?

  How can I reset the time and date on Windows Vista

  http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

  http://www.Vistax64.com/tutorials/114989-date-time-change.html

  Read the information in one of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get the old search wizard on windows vista/windows 7?

  Original title: bringing research research assistant, new bad engine

  Dear all.

  I like Windows XP search assistant as if worked as an engine of 'real' research, for example, bing, google and search keywords.
  The current one is too basic to windows vista and windows 7 is rubbish and doesn't like the old.

  How can I get the old search wizard on windows vista/windows 7?  If I can't do it, how I'd get that to happen?

  Your

  Tom2020

  HI Tom2020,

  If you want to leave comments about the research, please do so at:

  Windows 7 comments

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Question: How can I format drive C: / when Windows Vista is installed on it?

  I have hp pavilion dv2700 64-bit system with a hard drive of hitachi 250 GB with two type laptop were leaving c:, d: windows vista is installed on c: I want to format the c: drive and install windows 7 ultimate 32bit.tell me the steps to do this. Thank you

  Hello

  Bad forums

  These are some Vista Forums

  you start from the disc of windows 7:

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the disc, you

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  then proceed as follows:

  How to do a clean install with Windows 7

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  _______________________________________________________________

  and read this information

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  __________________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• How can I delete messages deleted from my computer Windows Vista + Windows Mail

  All old deleted messages are still on my hard drive.   I follow the procedure - deleting e-mail, empty deleted messages.  But all messages that are deleted for the last 2 years by using the 'search' in Windows, all deleted emails - still appear.   I have a used and right click the shred command and it deletes only the body

  and email, including address, remails etc.

  Hello

  rebuild the search index

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  http://www.TechRepublic.com/blog/window-on-Windows/how-do-i-rebuild-the-instant-search-index-in-Windows-Vista/628

• I can't dual boot my PC pre-installed Windows 7 with Windows XP?

  I created a primary partition on my Windows 7 PC preinstalled in freeing up space. When I start my PC the Windows XP installation CD, Windows XP will in the usual configuration process by displaying the F6 option on the screen blue etc and it unloads the controllers and disks required.  However, when the installation phase starts, an error message appears: "a problem has been detected and windows has shut down to prevent damage to your computer.  Continue displaying the error message "If this is the first time you've seen this stop error screen, restart your computer. If this screen appears the following steps - check for viruses, run Chkdsk.  It is followed by a time code error stop: 0X0000007B etc.  Please note that I checked my computer for any viruses and none have been reported.  I ran CHKDSK in guest of user privileges to administrator and windows has checked the file system had no problem.

  It is important to mention that since I managed to install a copy of Windows Vista on my PC pre-installed Windows 7 without any problem.  I can now now dual boot between the two OSs.  Unfortunately, I can not install a new genuine copy of Windows XP on my PC.  I get the same old error message after configuring setup blue screen whenever I try to install Windows XP.  Now, it seems that I have to buy another PC to install XP despite the fact that I have a lot of space on the hard drive of Windows 7 preinstalled PC.  I am aware of the fact that Windows XP uses a different startup for Windows 7/Vista file, but my computer must always allow Windows XP install.

  I am just totally baffled by the latter.   It is normally recommended to install Windows XP before Windows 7, but because my PC is preinstalled with Windows 7, this recommeded option has not been available to me.  I would appreciate any suggestion to this problem of people there.

  Thank you

  Martin

  "the SATA driver will be included in the Chipset Drivers?" - Yes they are generally at least that your SATA ports are connected to a separate SATA/RAID chip.

  There are two good utilities to create a "SlipStreamed" CD
  (1) Autostreamer - easy to use. (Only not for the integration of the drivers)
  (2) nLite - which is more complex, but you can integrate drivers
  and much more. http://www.nliteos.com/nLite.html
  nLite Guide: http://www.nliteos.com/guides.html

  J W Stuart: http://www.pagestart.com

• Question: How can I format external drive in exFAT? NOT in NTFS!

  OK, so frustrated that I had to go through the hedges to sign up here to ask a question like that. Why can I NOT format exFAT? I have many external HDDs that were formatted in exFAT under WIndows XP Pro but my new system, completely updated Windows 7 Professional, I can't format external drives of exFAT. The option is NOT available. In the Format window, file system, is the only option: NTFS (default), there is no other option. I googled the * on this issue and found no answer. This external hard drive MUST be formatted as a disc exFAT. Period. Someone please help.

  I'm surprised the research online increase this... You can do it from the command prompt, but not from this dialog box.  Here's how:

  -Open a command prompt by typing cmd in the start/search box, right click on the cmd search result and select "Run as Administrator"
  -Type format g: FS:exFAT , then press ENTER to start formatting the G drive as exFAT
  To view all other options, type format /? and press ENTER.

• Question: How can I format 10 systems at the same time through the connection to the LAN?

  install

  HI.i want to format 10 pc in lan .How can I .thank

  If you are the administrator of a such LAN, then you already know - if you are not the administrator, then you have no right to do.