Question: how to assign the VPN IP VPN client user using 5.4 ACS?

I'm new to ACS5.4.  What I want to achieve is to leave the ACS5.4 to assign IP addresses to users who are connecting to our ASA using the Cisco VPN client.  ASA runs as a Radius of ACS5.4 client, and we have tested successfully for Radius Authentication.  But users always get "unknown error" in the client VPN, after to be authenticated successfully.  I think I used probably incorrect RADIUS attributes to an authorization policy.  Here's what I did:

1. in the elements of the policy-> authorization permissions->-> authorization of network access profiles, I created a new profile and this profile is called the Radius CVPN3000/ASA/PIX7.x-DHCP-Network-Scope attribute.  An IP address is entered under this attribute as a static value.

2. then, in access policies-> services-> client VPN IPSec with RADIUS Access (it's politics that I created)-> permission, I created an authorization policy allowing RADIUS previously created profile in order to be used.

I missed something?  Maybe I got the wrong RADIUS attribute?  Thanks in advance for any help!

ACS 5 doesn't have the ability to provide the IP addresses between the pools of IP addresses defined in ACS.

You must assign static users on basis by user on ACS 5. You can also create a pool on the SAA and tap the name of the ACS 5 pool

http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/release/notes/acs_53_rn.html#wp216411

Jatin kone
-Does the rate of useful messages-

Tags: Cisco Security

Similar Questions

  • How to install the VPN Client and the tunnel from site to site on Cisco 831

    How can I configure a Cisco 831 router (Branch Office) so that it will accept incoming VPN Client connections and initiate tunneling IPSec site to site on our hub site that uses a VPN 3005 concentrator?  I could get the tunnel to work by configuring it in a dynamic encryption card, but interesting traffic side Cisco 831 would not bring the tunnel upward.  I could only put on the side of the hub.  If I use a static encryption card and apply it to the external interface of the 831 I can get this working but then I couldn't get the VPN Client to work.

    Thank you.

    The dynamic map is called clientmap
    The static map is called mymap

    You should have:

    no card crypto not outmap 10-isakmp ipsec dynamic dynmap
    map mymap 10-isakmp ipsec crypto dynamic clientmap

    interface Ethernet1
    crypto mymap map

    Federico.

  • The VPN client user authentication

    When users connect to our network remotely via VPN user name field is already filled with the last person who logged. I know that they just delete the username and enter their own, but is there a way the client can be configured to where the username field will be always empty for all those who want access to the network via VPN? We have an ASA 5510 with version 7.0 (8) and a windows 2003 with IAS server for windows authentication. Thank you!

    Hello

    In FCP, you can configure a single line is not editable by the user (or the vpn client).

    Simply insert an attack! Like this

    ! Username =

    ! SaveUserPassword = 0

    ! UserPassword =

    ! enc_UserPassword =

    Subsequently the vpn client will not save registrations for these settings more.

  • Assign the PMP license to specific users without TMS

    Hello guys,.

    IM development environment of videoconferencing on my client with this specification:

    -Worm CUCM 11.x

    -Telepresence conductor XC4.0 (only 1)

    -vTelepresence Server ver 4.2 (only 1)

    My problem is im using PMP licenses, no screen. So I really confuse how to assign the license PMP to specific users.

    I already insert the driver's license, like the image below:

    the multiparty license on driver State said: I already have 25 license PMP but assign 0. and he said: if I did a conference call, he used license SMP, so the lack of SMP license error always come. So I need 1 license PMP connection to my user / ext to remove the error warning.

    I can do without TMS?

    If can, please help me with this.

    Thank you all.

    Best regards

    Christophe.

    The recommendation is to use use AD to import users in CUCM and TMSPE to make sure that all the same users are added.  However, you may manually create users in CUCM and TMSPE as long as the details between the two systems are the same, including the address of the video as that will identify the user as long as the host of the CMR.

  • Routing problem between the VPN Client and the router's Ethernet device

    Hello

    I have a Cisco 1721 in a test environment.

    A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

    The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

    The configuration was inspired form the sample Configuration

    "Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

    and the output of the ConfigMaker configuration.

    Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

    side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

    Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

    (customer has a correct route and return ICMP packets to the router).

    The question now is:

    How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

    conf of the router is attached - hope that's not too...

    Thanks & cordially

    Thomas Schmidt

    -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

    !

    version 12.2

    horodateurs service debug uptime

    Log service timestamps uptime

    encryption password service

    !

    !

    host name * moderator edit *.

    !

    enable secret 5 * moderator edit *.

    !

    !

    AAA new-model

    AAA authentication login userauthen local

    AAA authorization groupauthor LAN

    !

    ! only for the test...

    !

    username cisco password 0 * moderator edit *.

    !

    IP subnet zero

    !

    audit of IP notify Journal

    Max-events of po verification IP 100

    !

    crypto ISAKMP policy 3

    3des encryption

    preshared authentication

    Group 2

    !

    ISAKMP crypto client configuration group 3000client

    key cisco123

    pool ippool

    !

    ! We do not want to divide the tunnel

    ! ACL 108

    !

    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

    !

    Crypto-map dynamic dynmap 10

    Set transform-set RIGHT

    !

    map clientmap client to authenticate crypto list userauthen

    card crypto clientmap isakmp authorization list groupauthor

    client configuration address map clientmap crypto answer

    10 ipsec-isakmp crypto map clientmap Dynamics dynmap

    !

    interface Ethernet0

    no downtime

    Description connected to VPN

    IP 192.168.1.1 255.255.255.0

    full-duplex

    IP access-group 101 in

    IP access-group 101 out

    KeepAlive 10

    No cdp enable

    !

    interface Ethernet1

    no downtime

    address 192.168.3.1 IP 255.255.255.0

    IP access-group 101 in

    IP access-group 101 out

    full-duplex

    KeepAlive 10

    No cdp enable

    !

    interface FastEthernet0

    no downtime

    Description connected to the Internet

    IP 172.16.12.20 255.255.224.0

    automatic speed

    KeepAlive 10

    No cdp enable

    !

    ! This access group is also only for test cases!

    !

    no access list 101

    access list 101 ip allow a whole

    !

    local pool IP 192.168.10.1 ippool 192.168.10.10

    IP classless

    IP route 0.0.0.0 0.0.0.0 172.16.12.20

    enable IP pim Bennett

    !

    Line con 0

    exec-timeout 0 0

    password 7 * edit from moderator *.

    line to 0

    line vty 0 4

    !

    end

    ^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

    Thomas,

    Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

    Kurtis Durrett

  • The VPN client VPN connection behind other PIX PIX

    I have the following problem:

    I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).

    So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5

    I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.

    Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.

    If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:

    305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x

    194.x.x.x is our customer s address IP PIX

    I understand that somewhere access list is missing, but I can not understand.

    Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.

    Can you please help me?

    Thank you in advan

    The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.

    I've cut and pasted here for you to read, I think that the problem mentioned below:

    Question:

    Hi Glenn,.

    Following is possible?

    I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.

    The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?

    My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.

    Thank you very much for any help provided in advance.

    Response from Glenn:

    First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:

    fixup protocol esp-ike

    See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.

    If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:

    ISAKMP nat-traversal

    See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.

    NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.

    ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.

    A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.

    NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.

    Hope that helps.

  • Itineraries other nets will be lost when using the vpn client?

    I have a very general question. I intend to implement a security solution for the extranet partners to connect to our intranet using VPN client. IPSec will close on the external interface of the Cisco PIX firewall v6.3.

    Now, my consirn is, I downloaded the vpn client to test but I saw no advance settings to define what network traffic will pass through the IPSec tunnel and which will be routed normally. Is it by default all traffic passing through VPN? Is that what it means if there are other networks using their default route, they will not be able to achieve? (i.e. the Internet).

    Thank you.

    That would depend on how you set up the PIX. You can allow the VPN to your site and access to the Internet at the same time. This is called the split tunneling. It is configurable on the PIX, not the customer.

    This link might help you get started, but I'm sure that there stronger links.

    http://www.Cisco.com/en/us/customer/products/sw/secursw/ps2120/products_command_reference_chapter09186a00800ec9ec.html

  • IP address connection sets using the VPN Client

    Hello world. I'm using a VPN Client when I establish a VPN Tunnel with a 1600 router, and I have a question.

    Can I assign a fixed IP address in the client, instead the router send to random addresses from customer?

    What I would he do this?

    It would be in the configuration of the VPN client, or in the configuration of the router?

    If so, I'm doing this?

    Do I need another tool, or other software or hardware to do?

    any help is hope...

    Thank you...

    Hello

    I don't think that there is a simple way to do this.

    However, if you create a different groupname for the user who needs a static IP address, I think you should be good to go

    So what you need to do, create a new pool of addresses. Make the start and end ip address be the same (this is the address to which you want to assign to the VPN user)

    Configure another ipsec on the router group and bind the new pool to this group

    Ask your VPN client to connect to this group

    Hope that helps

    Jean Marc

  • The VPN Clients cannot Ping hosts

    I'll include a post my config. I have clients that connect through the VPN tunnel on the 180.0.0.0/24 network, 192.168.1.0/24 is the main network for the office.

    I can connect to the VPN, and I received a correct address assignment. I belive tunneling can be configured correctly in the aspect that I can always connect to the internet then on the VPN, but I can't ping all hosts on the 192.168.1.0 network. In the journal of the ASDM debugging, I see pings to the ASA, but no response is received on the client.

    6 February 21, 2013 21:54:26 180.0.0.1 53508 192.168.1.1 0 Built of ICMP incoming connections for faddr gaddr laddr 192.168.1.1/0 (christopher) 192.168.1.1/0 180.0.0.1/53508

    Any help would be greatly appreciated, I'm currently presuring my CCNP so I would get a deeper understanding of how to resolve these issues.

    -Chris

    hostname RegencyRE - ASA

    domain regencyrealestate.info

    activate 2/VA7dRFkv6fjd1X of encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    name 180.0.0.0 Regency

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    link to the description of REGENCYSERVER

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    link to the description of RegencyRE-AP

    !

    interface Vlan1

    nameif inside

    security-level 100

    192.168.1.120 IP address 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP x.x.x.x 255.255.255.248

    !

    passive FTP mode

    clock timezone PST - 8

    clock summer-time recurring PDT

    DNS lookup field inside

    DNS domain-lookup outside

    DNS server-group DefaultDNS

    Server name 208.67.220.220

    name-server 208.67.222.222

    domain regencyrealestate.info

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 Regency 255.255.255.224

    RegencyRE_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

    outside_access_in list extended access permit icmp any one

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    mask Regency 180.0.0.1 - 180.0.0.20 255.255.255.0 IP local pool

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM 255.255.255.0 inside Regency location

    ASDM location 192.168.0.0 255.255.0.0 inside

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 12.186.110.2 1

    Route inside 192.0.0.0 255.0.0.0 192.168.1.102 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    the ssh LOCAL console AAA authentication

    LOCAL AAA authentication serial console

    http server enable 8443

    http 0.0.0.0 0.0.0.0 outdoors

    http 0.0.0.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH 0.0.0.0 0.0.0.0 inside

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH timeout 15

    SSH version 2

    Console timeout 0

    dhcprelay Server 192.168.1.102 inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    NTP server 69.25.96.13 prefer external source

    NTP server 216.171.124.36 prefer external source

    WebVPN

    internal RegencyRE group strategy

    attributes of Group Policy RegencyRE

    value of server DNS 208.67.220.220 208.67.222.222

    Protocol-tunnel-VPN IPSec

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list RegencyRE_splitTunnelAcl

    username password encrypted adriana privilege 0

    christopher encrypted privilege 15 password username

    irene encrypted password privilege 0 username

    type tunnel-group RegencyRE remote access

    attributes global-tunnel-group RegencyRE

    Regency address pool

    Group Policy - by default-RegencyRE

    IPSec-attributes tunnel-group RegencyRE

    pre-shared key R3 & eNcY1.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    Review the ip options

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    call-home

    Profile of CiscoTAC-1

    no active account

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory

    monthly periodicals to subscribe to alert-group configuration

    daily periodic subscribe to alert-group telemetry

    Cryptochecksum:35bc3a41701f7f8e9dde5fa35532896d

    : end

    Hello

    -be sure that the destination host 192.168.1.x has a route towards 180.0.0.0 by the ASA gateway.

    -Configure the following figure:

    capture capin interface inside match icmp 192.168.1.x host 180.0.0.x

    capture ASP asp type - drop all

    then make a continuous ping and get 'show capin cap' and 'asp cap.

    -then check the ping, the 'encrypted' counter is increasing in the VPN client statistics

    I would like to know about it, hope this helps

    ----

    Mashal

  • Need a guide to configure the VPN Client

    Hello...

    I vpn in my 506th pix and I have ver.4.0.1 software vpn client installed on the other pc (on the outside). In the firewall, there are two types of vpn; VPN site to site and remote vpn access. We use vpn for remote access to allow the vpn client to access our server right?

    This is all new to me and could you give an example how to configure vpn inside my firewall in CLI or PDM command and how to configure the software vpn client.

    Please help us beginners cisco

    Tonny

    Tony,

    Try chanigng a cisco and see if it solves... but otherwise, since you changed the PIX outside IP now, you will be able to make VPN connections to the new public IP address now, if it is routed on the internet.

    can you please try to connect now and let us know what is happening?

  • The VPN client connection

    Is it possible to configure the VPN client to set up some sort of login and password so when you run, connects automatically without writing the user name and password.

    This must be the vpn client without making any changes on the vpn server.

    No idea how to do this?

    Kind regards

    to 4.0.2 4.6 & 4.8 Yes - in the profile .pcf file, make sure that

    SaveUserPassword = 1

    This will keep the user name & password in the profile, when you click on it - it should fine connection.

    You must also activate the user store password: -.

    In the pix / asa - under the client VPN profile:-

    allow password-storage

    HTH.

  • field of the authentication of the vpn client

    Hi, I would like to remove the domain in the authentication of the vpn client. How?

    Could the password-management, command force the presence of the domain?

    Thank you

    Yes, once you add password management, domain field appears. If you do not need password management, you could remove it and field will disappear.

  • Terminating the VPN client on 871W

    Hello

    I tried to install EasyVPN on a cisco 871W by SDM. The goal is to finish the VPN client with authentication with an external RADIUS/advertising (on a local subnet). I implemented the IAS on a win2003 Server advertising and checked the accounts.

    SDM was missing the 'crypto map' piece of config. After you add this in the CLI it still didn't work. Thus, EasyVPN is not as easy at is sounds...

    Could someone with some knowledge of VPN and IPsec and so forth please look at this config? Maybe it gives me an idea of what I did wrong (which, without a doubt, must be the case).

    Thank you

    Erik

    ==

    AAA new-model
    !
    AAA rad_eap radius server group
    auth-port 1645 10.128.7.5 Server acct-port 1646
    !
    AAA rad_mac radius server group
    !
    AAA rad_acct radius server group
    !
    AAA rad_admin radius server group
    !
    AAA server Ganymede group + tac_admin
    !
    AAA rad_pmip radius server group
    !
    RADIUS server AAA dummy group
    !
    AAA authentication login default local
    AAA authentication login eap_methods group rad_eap
    AAA authentication login mac_methods local
    AAA authentication login sdm_vpn_xauth_ml_1 local
    AAA authorization exec default local
    AAA authorization ipmobile default group rad_pmip
    AAA authorization sdm_vpn_group_ml_1 LAN
    AAA accounting network acct_methods
    action-type market / stop
    Group rad_acct
    !
    !
    !
    AAA - the id of the joint session
    clock timezone MET 1
    clock to DST DST PUTS recurring last Sun Mar 02:00 last Sun Oct 02:00
    !
    Crypto pki trustpoint TP-self-signed-1278336536
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 1278336536
    revocation checking no
    rsakeypair TP-self-signed-1278336536
    !
    !
    TP-self-signed-1278336536 crypto pki certificate chain
    certificate self-signed 01
    3082024A 308201B 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
    2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
    69666963 31323738 33333635 6174652D 3336301E 170 3039 31303237 32313237
    32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
    4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 32373833 65642D
    33363533 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
    81008B 56 5902F5DF FCE1A56E 3A63350E 45956514 1767EF73 FEC6CD16 7E982A82
    B0AF8546 ABB3D35A B7C3A7E3 3ACCB34A 8B655C97 F103DBD5 9AAEFEFC 37A 02103
    4EFC398B 0C8B6BE5 AD3E568E 6CB69F87 CBCA0785 EAED0A28 726F2F0A B0B0453E
    32E6B3B7 861F87FA 222197DD 3410D8A9 35939E9B CBF95F20 B8DA6ADE BF460F5C
    BF8F0203 010001A 3 72307030 130101 1 FF040530 030101FF 301D 0603 0F060355
    551 1104 16301482 12444341 4E495430 302E6361 6E2D6974 2E657530 1F060355
    1 230418 30168014 84C9223E 661B2EB4 5BAB0B0E 1BE3A27A 64B3AEB0 301D 0603
    551D0E04 16041484 C9111E66 1B2EB45B AB0B0E1B E3A27A64 B3AEB030 0D06092A
    010104 05000381 8693B 599 70EC1F1A D2995276 F3E4AF9D 81002F4A 0D 864886F7
    17E3583A 46C749F9 38743E6F F5E60478 5B9B5091 E944C689 7BA6DCA2 94D2FBD3
    AFDE4500 A0A3644E 603A852D 55ED7A87 93501D5C 1662DAED 3FFFEC5A F1C38ED4
    E0787561 BA5C14A3 6D065FCF 7DBDEBB6 9186C2D9 AA253FBF A9E38BC3 342C3AC9
    2BEF6821 E4C50277 493AD5B6 2AFE
    quit smoking
    dot11 syslog
    !
    IP source-route
    !
    !
    DHCP excluded-address IP 10.128.1.250 10.128.1.254
    DHCP excluded-address IP 10.128.150.250 10.128.150.254
    DHCP excluded-address IP 10.128.7.0 10.128.7.100
    DHCP excluded-address IP 10.128.7.250 10.128.7.254
    !
    pool IP dhcp VLAN30-COMMENTS
    import all
    Network 10.128.1.0 255.255.255.0
    router by default - 10.128.1.254
    10.128.7.5 DNS server
    -10.128.7.5 NetBIOS name server
    aaa.com domain name
    4 rental
    !
    IP dhcp VLAN20-STAFF pool
    import all
    Network 10.128.150.0 255.255.255.0
    router by default - 10.128.150.254
    10.128.7.5 DNS server
    -10.128.7.5 NetBIOS name server
    aaa.com domain name
    4 rental
    !
    IP dhcp SERVERS VLAN10 pool
    import all
    Network 10.128.7.0 255.255.255.0
    router by default - 10.128.7.254
    10.128.7.5 DNS server
    -10.128.7.5 NetBIOS name server
    aaa.com domain name
    4 rental
    !
    !
    IP cef
    no ip domain search
    IP domain name aaa.com
    inspect the tcp IP MYFW name
    inspect the IP udp MYFW name
    No ipv6 cef
    !
    Authenticated MultiLink bundle-name Panel
    !
    VPDN enable
    !
    !
    !
    username privilege 15 secret 5 xxxx xxxx
    !
    !
    crypto ISAKMP policy 1
    BA 3des
    preshared authentication
    Group 2
    !
    ISAKMP crypto client configuration group vpn
    key xxxx
    pool SDM_POOL_1
    netmask 255.255.255.0
    !
    !
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    !
    crypto dynamic-map SDM_DYNMAP_1 1
    market arriere-route
    !
    !
    card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
    map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
    client configuration address map SDM_CMAP_1 crypto answer
    map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
    !
    Crypto ctcp port 10000
    Archives
    The config log
    hidekeys
    !
    !
    !
    Bridge IRB
    !
    !
    interface Loopback0
    10.128.201.1 the IP 255.255.255.255
    map SDM_CMAP_1 crypto
    !
    interface FastEthernet0
    switchport access vlan 10
    !
    interface FastEthernet1
    switchport access vlan 20
    !
    interface FastEthernet2
    switchport access vlan 10
    !
    interface FastEthernet3
    switchport access vlan 30
    !
    interface FastEthernet4
    no ip address
    Speed 100
    full-duplex
    PPPoE enable global group
    PPPoE-client dial-pool-number 1
    No cdp enable
    !
    interface Dot11Radio0
    no ip address
    Shutdown
    No dot11 extensions aironet
    !
    interface Vlan1
    address IP AAA. BBB. CCC.177 255.255.255.240
    no ip redirection
    no ip proxy-arp
    NAT outside IP
    no ip virtual-reassembly
    No autostate
    Hold-queue 100 on
    !
    interface Vlan10
    SERVER description
    no ip address
    IP nat inside
    no ip virtual-reassembly
    No autostate
    Bridge-group 10
    Bridge-group of 10 disabled spanning
    !
    interface Vlan20
    Description of the STAFF
    no ip address
    IP nat inside
    no ip virtual-reassembly
    No autostate
    Bridge-group 20
    Bridge-group 20 covering people with reduced mobility
    !
    Vlan30 interface
    Description COMMENTS
    no ip address
    IP nat inside
    no ip virtual-reassembly
    No autostate
    Bridge-group 30
    Bridge-group 30 covering people with reduced mobility
    !
    interface Dialer1
    MTU 1492
    IP unnumbered Vlan1
    no ip redirection
    no ip proxy-arp
    NAT outside IP
    inspect the MYFW over IP
    IP virtual-reassembly
    encapsulation ppp
    Dialer pool 1
    Dialer-Group 1
    PPP authentication pap callin
    PPP pap sent-name of user password 7 xxxx xxxxx
    !
    interface BVI10
    Description the server network bridge
    IP 10.128.7.254 255.255.255.0
    IP nat inside
    IP virtual-reassembly
    !
    interface BVI20
    Description personal network bridge
    IP 10.128.150.254 255.255.255.0
    IP nat inside
    IP virtual-reassembly
    !
    interface BVI30
    Bridge network invited description
    IP 10.128.1.254 255.255.255.0
    IP access-group Guest-ACL in
    IP nat inside
    IP virtual-reassembly
    !
    pool of local SDM_POOL_1 192.168.2.1 IP 192.168.2.100
    IP forward-Protocol ND
    IP route 0.0.0.0 0.0.0.0 Dialer1
    IP http server
    access-class 2 IP http
    local IP http authentication
    IP http secure server
    IP http secure ciphersuite 3des-ede-cbc-sha
    IP http secure-client-auth
    IP http timeout policy slowed down 60 life 86400 request 10000
    !
    !
    overload of IP nat inside source list 101 interface Vlan1
    IP nat inside source static tcp 10.128.7.1 25 AAA. BBB. Expandable 25 CCC.178
    IP nat inside source static tcp 10.128.7.1 80 AAA. BBB. CCC.178 extensible 80
    IP nat inside source static tcp 10.128.7.1 443 AAA. BBB. CCC.178 extensible 443
    IP nat inside source static tcp 10.128.7.1 8333 AAA. BBB. CCC.178 extensible 8333
    IP nat inside source static tcp 10.128.7.2 25 AAA. BBB. Expandable 25 CCC.179
    IP nat inside source static tcp 10.128.7.2 80 AAA. BBB. CCC.179 extensible 80
    IP nat inside source static tcp 10.128.7.2 443 AAA. BBB. CCC.179 extensible 443
    IP nat inside source static tcp 10.128.7.2 8333 AAA. BBB. CCC.179 extensible 8333
    IP nat inside source static tcp 10.128.7.3 25 AAA. BBB. Expandable 25 CCC.180
    IP nat inside source static tcp 10.128.7.3 80 AAA. BBB. CCC.180 extensible 80
    IP nat inside source static tcp 10.128.7.3 443 AAA. BBB. CCC.180 extensible 443
    IP nat inside source static tcp 10.128.7.3 8333 AAA. BBB. CCC.180 extensible 8333
    IP nat inside source static tcp 10.128.7.4 25 AAA. BBB. Expandable 25 CCC.181
    IP nat inside source static tcp 10.128.7.4 80 AAA. BBB. CCC.181 extensible 80
    IP nat inside source static tcp 10.128.7.4 443 AAA. BBB. CCC.181 extensible 443
    IP nat inside source static tcp 10.128.7.4 8333 AAA. BBB. CCC.181 extensible 8333
    IP nat inside source static tcp 10.128.7.5 25 AAA. BBB. Expandable 25 CCC.182
    IP nat inside source static tcp 10.128.7.5 80 AAA. BBB. CCC.182 extensible 80
    IP nat inside source static tcp 10.128.7.5 443 AAA. BBB. CCC.182 extensible 443
    IP nat inside source static tcp 10.128.7.5 8333 AAA. BBB. CCC.182 extensible 8333
    IP nat inside source static tcp 10.128.7.6 25 AAA. BBB. Expandable 25 CCC.183
    IP nat inside source static tcp 10.128.7.6 80 AAA. BBB. CCC.183 extensible 80
    IP nat inside source static tcp 10.128.7.6 443 AAA. BBB. CCC.183 extensible 443
    IP nat inside source static tcp 10.128.7.6 8333 AAA. BBB. CCC.183 extensible 8333
    IP nat inside source static tcp 10.128.7.7 25 AAA. BBB. Expandable 25 CCC.184
    IP nat inside source static tcp 10.128.7.7 80 AAA. BBB. CCC.184 extensible 80
    IP nat inside source static tcp 10.128.7.7 443 AAA. BBB. CCC.184 extensible 443
    IP nat inside source static tcp 10.128.7.7 8333 AAA. BBB. CCC.184 extensible 8333
    IP nat inside source static tcp 10.128.7.8 25 AAA. BBB. Expandable 25 CCC.185
    IP nat inside source static tcp 10.128.7.8 80 AAA. BBB. CCC.185 extensible 80
    IP nat inside source static tcp 10.128.7.8 443 AAA. BBB. CCC.185 extensible 443
    IP nat inside source static tcp 10.128.7.8 8333 AAA. BBB. CCC.185 extensible 8333
    IP nat inside source static tcp 10.128.7.9 25 AAA. BBB. Expandable 25 CCC.186
    IP nat inside source static tcp 10.128.7.9 80 AAA. BBB. CCC.186 extensible 80
    IP nat inside source static tcp 10.128.7.9 443 AAA. BBB. CCC.186 extensible 443
    IP nat inside source static tcp 10.128.7.9 8333 AAA. BBB. CCC.186 extensible 8333
    IP nat inside source static tcp 10.128.7.10 25 AAA. BBB. Expandable 25 CCC.187
    IP nat inside source static tcp 10.128.7.10 80 AAA. BBB. CCC.187 extensible 80
    IP nat inside source static tcp 10.128.7.10 443 AAA. BBB. CCC.187 extensible 443
    IP nat inside source static tcp 10.128.7.10 8333 AAA. BBB. CCC.187 extensible 8333
    IP nat inside source static tcp 10.128.7.11 25 AAA. BBB. Expandable 25 CCC.188
    IP nat inside source static tcp 10.128.7.11 80 AAA. BBB. CCC.188 extensible 80
    IP nat inside source static tcp 10.128.7.11 443 AAA. BBB. CCC.188 extensible 443
    IP nat inside source static tcp 10.128.7.11 8333 AAA. BBB. CCC.188 extensible 8333
    IP nat inside source static tcp 10.128.7.12 25 AAA. BBB. Expandable 25 CCC.189
    IP nat inside source static tcp 10.128.7.12 80 AAA. BBB. CCC.189 extensible 80
    IP nat inside source static tcp 10.128.7.12 443 AAA. BBB. CCC.189 extensible 443
    IP nat inside source static tcp 10.128.7.12 8333 AAA. BBB. CCC.189 extensible 8333
    !
    Guest-ACL extended IP access list
    deny ip any 10.128.7.0 0.0.0.255
    deny ip any 10.128.150.0 0.0.0.255
    allow an ip
    IP Internet traffic inbound-ACL extended access list
    allow udp any eq bootps any eq bootpc
    permit any any icmp echo
    permit any any icmp echo response
    permit icmp any any traceroute
    allow a gre
    allow an esp
    !
    access-list 1 permit 10.128.7.0 0.0.0.255
    access-list 1 permit 10.128.150.0 0.0.0.255
    access-list 1 permit 10.128.1.0 0.0.0.255
    access-list 2 allow 10.0.0.0 0.255.255.255
    access-list 2 refuse any
    access-list 101 permit ip 10.128.7.0 0.0.0.255 any
    access-list 101 permit ip 10.128.150.0 0.0.0.255 any
    access-list 101 permit ip 10.128.1.0 0.0.0.255 any
    Dialer-list 1 ip Protocol 1
    !
    !
    !
    !
    format of server RADIUS attribute 32 include-in-access-req hour
    RADIUS-server host 10.128.7.5 auth-port 1645 acct-port 1646 borders 7 xxxxx
    RADIUS vsa server send accounting
    !
    control plan
    !
    IP route 10 bridge
    IP road bridge 20
    IP road bridge 30
    Banner motd ^.
    Unauthorized access prohibited. *
    All access attempts are logged! ***************

    ^
    !
    Line con 0
    password 7 xxxx
    no activation of the modem
    line to 0
    line vty 0 4
    access-class 2
    privilege level 15
    transport input telnet ssh
    !
    max-task-time 5000 Planner
    AAA.BBB.CCC.ddd NTP server
    end

    Erik,

    The address pool you are talking about is to assign to the customer or the public router interface?  If you want to set up your vpn client software point a full domain name instead of an IP address that you can do it too long you can ensure the use of the name is resolved by a DNS SERVER.

    The range of addresses that you can be asigned to your Dialer interface will depend on your ISP.

    -Butterfly

  • Group to be installed on the VPN Client

    We run IOS 8.2 (2). We configure VPN groups to authenticate locally to the ASA.  We have about 10 different groups (marketing, engineering, accounting, technical support, etc.) that I need the installation which is no problem.  My problem is that I have to configure 10 different groups on the VPN client based on their user name.  Is it possible to set up a generic group such as everyone on the VPN client and the users will no longer have access to resources based on their user name when they connect to the VPN client?

    Please let me know if you have any questions or need additional information.

    Thank you.

    Laura

    Hi Laura,

    You can have all users that connect to the same group.

    Then, individually on each user, create a VPN filter...

    username test attributes

    VPN-filter...

    Federico.

  • The Vpn Client ASDM download

    I was trying to the vpn Wizard ASDM allows you to download the new client anyconnect 4.2 and I got errors saying that the file is not valid.

    Should which file I download in order for customers to download the vpn client.

    I have asa x 5506

    Hello

    You must use the anyconnect file you get from cisco.com or Cisco partner and download, the .pkg file extension

    for example:

    # poster run | grep anyconnect
    AnyConnect image disk0:/anyconnect-win-4.2.01022-k9.pkg 1

    HTH

    Samer.

Maybe you are looking for

  • Links Facebook redirects to ads and sites web app

    Hi all! I noticed a couple of weeks a few links on the application Facebook redirects to ad and app sites and it becomes really annoying! I recorded the video below for you to see what I mean: https://youtu.be/BsyGZY0oPmk I tried to keep the advertis

  • Satellite U - restarts and restarts so that the installer of Windows 7

    I just bought my new laptop Toshiba from Harvey Norman. When I try to put in place, it just restarts again and again and I can't do anything to stop it. It says installation configuration. Harvey Norman is trying to tell me that it will take hours fo

  • GSS108E: time to upgrade the firmware

    Hi all I tried to update the firmare of my GSS108E to version 1.0.0.1. The firmware is only about 40%. then the 'Prosafe Plus Configuration Utility"indicates a timeout. The "PPC utility" shows a look next to the name of the switch and always only wil

  • Best compatible blu ray burner for late 2013 iMac

    Hello everyone. I'm a little shy gun that I bought a LG BE14NU40, who is correctly identified, but has a strange error after it starts to burn DVD/BD. That is why I am reaching out to the community for those of you who have a USB 3.0 external BD reco

  • OfficeJet Pro 8610: 8610 printing problems - diagnosis will print but nothing else

    Nice day My printer does not print Office, PDF, images, etc.  However, it will display the diagnosis of the Toolbox page.  I don't know what to do.  I uninstalled and reinstalled, rebooted my computer and nothing worked.  It obviously becomes the inf