Question in the reading of a binary file, with data "flatten to a string.

Similar Questions

• Write to the Cluster size in binary files

  I have a group of data, I am writing to you in a file (all different types of numeric values) and some paintings of U8. I write the cluster to the binary file with a size of array prepend, set to false. However, it seems that there are a few additional data included (probably so LabVIEW can unflatten on a cluster). I have proven by dissociation each item and type casting of each, then get the lengths of chain for individual items and summing all. The result is the correct number of bytes. But, if I flattened the cluster for string and get this length, it is largest of 48 bytes and corresponds to the size of the file. Am I correct assuming that LabVIEW is the addition of the additional metadata for unflattening the binary file on a cluster and is it possible to get LabVIEW to not do that?

  Really, I would rather not have to write all the elements of the cluster of 30 individually. Another application is reading this and he expects the data without any extra bytes.

  At this neglected in context-sensitive help:

  Tables and chains in types of hierarchical data such as clusters always include information on the size.

  Well, it's a pain.

• The default value for a property with data of type boolean

  Hi all

  Is it a system preference setting, where the default value for a property with data of type boolean can be a Virgin? I want to keep the value by default in a vacuum, but every time I save the property even after empty selection, the default value changes to FALSE.

  

  In this case Boolean doesn't help you, you mayneed to create a chain of ownership and have true/false / "" as your list of values

• opening a binary file with the right extension

  Hello world

  I developed a real simple VI which allows me to read the first five bytes of a binary file for signature (ASCII) and check if its signature match with planned extensions. If Yes, another VI is called and that not one 2 button error message appears: If the user selects OK, a new dialog box opens to choose another file. and if the user chooses cancel, the same dialog box opens instead of escape from the VI.

  This is because while loop (VI below), but I don't see how I can handle this without him. Until the user has not chosen the right extension, he cannot escape from what is a problem! The real case is to call one another VI, and the first step of the stacked sequence is to display an error of two buttons.

  If you have any ideas, I'm a bit new! Thank you!!

  

  Hi..., christoph

  See the image as an attachment.

  The case of false contains only a true constant connected to any State.

  Mike

• Question about the "reading list" in the left pane of Safari

  'Reading list' in the left pane of Safari do not download and store videos to youtube (real video), it lists the location (URL).   Y at - it App, or an extension that will download youtube videos so I can watch them offline when I can't get internet connection?

  (I know that Google Chrome has one or several extensions to save youtube content - but I prefer not to download and install Chrome just to do this)

  Second related issue-

  If the playlist cannot download and store video files, what peut download and register to view or read it later when there is no internet connection?   Just plain text?

  Seems to me that Safari needs something that can actually download multimedia files.

  Thank you

  The role of the reading list is not store actual media, but only links to content in the destination, like the other favorites do. With attention to the copyright and other original content restrictions, you can copy and paste a video link to YouTube in the VLC media player and record the video on the spot.

• I am trying to remove the read-only in a file of windows vista program

  Hello

  I'm having a problem with the program files in Windows Vista. I have a file that I need to be able to write to and I can't get out of the read-only mode. Can someone help me with this please?

  Thank you.

  You really shouldn't be messing around in the Program Files folder unless you REALLY know what you are doing, because the wrong action can cause a lot of damage to your programs (more than one in some cases).  You experience trouble intentionally caused by Vista.

  But assuming you want to do anyway for some reason, the said problem as a Teen geek is ownership and permissions.  They are particularly tight on the programs folder (and hard to get around even for people experienced in this sort of thing).

  You must you give full permissions and take ownership of the files or the folders that you intend to work with.  You may need to change the permissions of the parent due to inherited permissions folders.  You may also use the advanced permissions option to deal with special permissions (maybe change some while they are not inherited or others in order to provide the right permissions as well as the main permissions screen.  I don't know how long until you go to appropriating, but start with everything that you need and work upward only when necessary.  Here are a few guidelines for permissions and lines taken possession that should help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Question about the opening of JavaScript (.js) files in Windows Explorer...

  Hello.

  I write web pages with external JavaScript files.

  When I right click on a file in Windows Explorer .js, I get a choice when selecting menu "open with...". » :

  -Microsoft (R) Windows Based Script Host

  -Microsoft Visual Studio

  -Notepad

  Nothing happens if I select the first. What is the first listed selection? Is this something that should have come with Vista?

  What to keep in mind, is that JavaScript is coded in the web pages, for example in HTML format.

  Go to a web page, right click on the white space and choose View Source and you will see the words such as JavaScript and function. If you look at the coding of the function, you should be able to recognize the commands.

  Good luck with the coding.

• A few questions about the use of a XML file to add text in a component defined in HTML TextArea

  I use AS2 in Flash CS3.

  I have a TextArea component in the scene that load its XML text and I was able to use the ul and li tags to create lists. However, when I try to include a nested list, he inserts just a line break between the nested list and the main list rather than he dash away. Is there a solution for this problem?

  Otherwise, how would I be able to add spaces nonbreaking in the XML so that they will be inside the TextArea element? I tried and & #160; without success. I've been searching the net for some help with this and find information about the change of the incorporation of xml file with a new entry for the non-breaking space of police and that has not worked either, which leaves me a bit confused.

  Flash does not support nested lists (as you know).  You can work around this limitation by using css and create your own styles of dash.  CSS have a property marginLeft, that you can use.

• binary file with line break

  Hello

  Today, I need to import data from a binary file / mixed text. The structure is

  CH1 octet1 Ch1 Ch2 Ch2 octet2 CrLf octet1 octet2

  CH1 octet1 Ch1 Ch2 Ch2 octet2 CrLf octet1 octet2

  CH1 octet1 Ch1 Ch2 Ch2 octet2 CrLf octet1 octet2

  My first attempt was a DataPluginExample3.VBS updated the

  Void ReadStore (File)

  Sun block: SetBlock = File.GetBinaryBlock)

  Dim Channel1: Set channel 1 = Block.Channels.Add ("Low-Timer", eU16)

  Canal2 Dim: Set Canal2 = Block.Channels.Add ("High-Timer", Ue16)

  Dim canal3: Canal3 Set = Block.Channels.Add ("CrLf", Ue16)

  Dim ChannelGroup: Set ChannelGroup = Root.Channelgroups.Add ("ESR_Timing")

  ChannelGroup.Channels.AddDirectAccessChannel (Channel1)

  ChannelGroup.Channels.AddDirectAccessChannel (Channel2)

  ChannelGroup.Channels.AddDirectAccessChannel (Channel3)
  "(Kanal 3 ist nur $OD$ OA CrLf)"

  End Sub

  Unfortunately, each odd sample, the data are corrupted and then become misaligned. And the beginning of data entry does not exactly start a new line.

  So I would use the CrLF to re-sync.

  How can I mix the approach of the ASCII-readline with binary data?

  The following does not work: I try to tell the trainer to use vbNewLine (= CrLf = $0D $0) to separate lines and use the channels of direct access with the data type of U16. But when you use the line break, apparently the import filter also expects the delimiters instead of raw binary values.

  Void ReadStore (File)

  File.Formatter.LineFeeds = vbNewLine

  File.SkipLine () ' Sicherstellen, dass erste wird ignoriert line unvollstandige

  Sun block: SetBlock = File.GetStringBlock()

  Dim Channel1: Set channel 1 = Block.Channels.Add ("Low-Timer", eU16)

  Canal2 Dim: Set Canal2 = Block.Channels.Add ("High-Timer", Ue16)

  ' Dim canal3: canal3 Set = Block.Channels.Add ("CrLf", Ue16)

  Dim ChannelGroup: Set ChannelGroup = Root.Channelgroups.Add ("ESR_Timing")

  ChannelGroup.Channels.AddDirectAccessChannel (Channel1)

  ChannelGroup.Channels.AddDirectAccessChannel (Channel2)

  End Sub

  Thank you for your comments.

  Michael

  Hi Michael,

  I think this use made the rounds.  I had to ignore all partial to the first row of values in order to keep the correspondence of the line of the high and low timer values.  Also note that by default the U16s are read with LittleEndian byte order - you can change that with File.Formatter.ByteOrder = eBigEndian.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Conversion of SSD drive for the reader to boot on m7 with Win8

  I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

  The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

  The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

  So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

  I don't know what the problem is.

  What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

  I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

  Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

  Any ideas out there in the land of the experts?

  Vachsen wrote:
  

  Thank you, erico, for advice.

  I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

  So far, I've done everything suggested this that caramel:

  -Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

  -Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

  -Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

  -The series 160 GB 320 firmware was up to date.

  -Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

  -Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

  -Enabled secure boot.

  Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.

  
  

  When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

  A number of things, I noticed I did upgrades:

  -The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

  -The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

  Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

  Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

  The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

  The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

  You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

  The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

  Dan

  Intel also recommends the free use of third parties such as cloning utilities

  http://www.EASEUS.com/disk-copy/

  http://Clonezilla.org/downloads.php

  http://www.partitionwizard.com/products.html

  EASEUS is, in my opinion, the best of the three.

• Get the table to an XML file with several bays

  Hello

  So I was faced with this program I have for the past few months but I'm almost there. I have a program that creates several berries and place one after the other in an xml file, and each table has its unique name. Now, I would create a VI that takes this XML file and when the user enters the name of the table specific they are seeking it goes into the xml file concludes the table in its entirety under this name and displays in an indicator of output to be read on the VI. A sample of my xml file and the VI that creates this xml file is attached.

  Thank you

  dlovell

  Something like this should work for you.

  

• How to write the xml content of a file (Blob data Type) with other columns in file system

  Team,
  We are currently working on oracle 11 g. Suppose that we consider the SCOTT. EMP table for our creation of the table.
  All existing columns of SCOTT along. EMP table allows to assume that this table has an additional column name emp_xml, which is of TYpe of BLOB data and it holds xml data.
  the size of the data blob for each record in this col is greater than 32 KB (normally about 1 GB), now I want to write the contents of this column along
  with enmae, empno, hiredate into an external file. Assume that if we are only to the BLOB column that is emp_xml then the code below works

  Start

  for c in (select emp_xml from your_table)

  loop

  dbms_xslprocessor.clob2file (emp_xml.getclobval (), 'YOUR_LOCATION', 'YOUR_DYNAMIC_FILENAME')
  end loop;
  end;

  but I want empno, enmae, hiredate with blob emp_xml written in the external file. Any assistance in this case welcome.

  Concerning

  max_linesize

  Maximum number of characters for each line, including the newline character, for this file (minimum 1, maximum value 32767). If not specified, Oracle provides a default value of 1024.

  Defines how much you can read or write to a single call. I have to loop through the clob object and I write a pieces of 1024. So there is no limit to how much she can write. Just test it, IT will WORK!

• Can't empty the trash due to a file with the filename of garbage

  MacBook Pro El Capitan - Trash has a/b/folder with a file with Chinese characters of garbage looking like file name which can not be changed or done something with. Trash does not open. sudo rm - rf don't get rid of it either. Any ideas?

  Thank you.

  Check SystemPreferences-> users & groups-> LoginItems, to see if there is something that has to do with this file, if so, remove it with the sign, if not, the next step:

  Restart the mac and then empty the trash.

• Question about the implementation of VLAN automatic voice with Polycom phones on a SF 300 - 24 p

  Someone at - it Setup successfully a SF 300 - 24 p to automatically assign a VLAN voice for traffic from an IP of Polycom phone? We have activated with LLDP-MED policy assigned to the port, as well as the interface configured as a trunk with the PVID defined on the VLAN data and Auto VLAN enabled.

  Hello

  Thank you for using the Cisco support community. My name is Nico Muselle and I work for Cisco Small Business Support Center.

  In response to your question, the only additional thing required on your switch is the choice of one of the below configurations:

  1. Affect the phone VLAN statically to ports connection of phones.

     or

  2. Turn them on Vlan voice (and change CoS affecting 5), and add telephony YES Polycom phones (the first 3 bytes of the MAC). You may need to add a few different Yes. This way the switch detects the phone YES and add the switchport to the Vlan voice.

  LLDP-MED network strategy as you have defined it, on the other hand, will be used to assign the VLAN on the phone automatically if you do not have to configure it manually on all phones.

  In short, you can choose one of the methods above, in combination with the LLDP-MED policy so everythings should work just fine. If it is not, please let me know.

  Kind regards

  Nico glacier
  Cisco Small Business Support Center.

• How to prohibit check-in if the folder has already main file with such a name?

  In Folders_g if you tried to insert 2 files with the same name in a folder, you got an error, that there is already a file with such name. In the context of records will be inserted the second file, but it will be renamed "copy of...» ». Is there an easy way to return same functionality as part of records, who was with Folders_g and simply ban chek-ins?

  It should be available in the workbook

  <@dynamichtml std_checkin_form_start_extra@="">

  <$include super.std_checkin_form_start_extra$="">

  <@end@>