Question motherboard regarding V570

Similar Questions

• I asked a question yesterday regarding the update of microsoft to the community, how do I access the answer

  I tried to install a critical update regarding sp1 on my system xp without success: RE, microsoft.net framework 3.5 service pack 1 and update family net framework 3.5 for versions of .net 2.0 to 3.5; Update (KB 8951847) x 86 No.: whenever I try to install it it returns me an error code 0 x 643 and the installation fails: can someone help me to install this update to stop constantly to send me reminders to download: my mental health is in your hands!

  You will receive an email with the answer, or you can also return to this (answers.microsoft.com) Web site and click on your name in the top right of the page.  When you click on your name, you will see your profile page, as well as any questions you never asked and the answers.

  I just looked at your profile page, and for your convenience, here is a direct link to your other question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/im-trying-to-install-update-KB951847-x86-for-the/fccbeb0c-8446-45D6-BA56-420cd1bb8717

• Question in regards to the script for automatic filling check box

  Hello everyone.  First of all, let me say a big thank you to all the users, but also the admins of this forum.  As a user of LiveCycle newbie, I learned an incredible amount of research on the forum and reading of others.  Now, to my current question...

  I use a custom form created in LiveCycle ES 8.2 and wonder how to empower a checkbox to fill automatically (IE. 'on') based on a number entered in a numeric field by using a range of criteria.  To be more precise, I have (5) checkboxes that will be labeled as follows:

  Name: CheckBox1 < 500

  Name: CheckBox2 500-999

  Name: CheckBox3 1 000-1 499

  Name: CheckBox4 > 1 500

  Name: Checkbox5 no

  I don't want only a SINGLE checkbox auto fill based on a certain number I enter the numeric field (called "NumericField1").  For example, if I enter "889" number, I want only CheckBox2 AutoComplete in.  Not sure what script to use in the Script Editor for this.  Any help would be greatly appreciated.  Thank you very much in advance.

  MJ

  You are welcome. I added a second numeric field. NF1 is entered by the user option. NF2 is calculated field read-only to mimic your form. NF2 simply takes the value of nf1. I moved the logic of radio button in the radio button exclusion group calculate event to produce the results below. I think that's what you're after. The updated form is attached.

  

  Steve

• Question: with regard to a fill object

  I am a Mac user.  I'm newish to Photoshop.  For several years I did very simple things with him.  I would like to take a jpeg of the State of New York in photoshop and fill it with a color ranging from light to dark.  I looked for steps to do online and in a book, but were unsuccessful.

  Anyone would be able to tell me the steps or point me to directions?

  Thank you for your help.

  Barb

  Looks like your file is in grayscale mode.  Change it to RGB.

• Pavilion dv7 - 1243cl: Questions of compensation for the motherboard component

  I have the following related material two 2 for hp experts, and both issues are with respect to the same JBK00 - 4091 P Rev 1 a motherboard, which is installed in a computer hp Pavilion dv7 - 1243 cl laptop:

  Below, I've included a picture that relates to both of my questions.

  QUESTION #1: I accidentally lost a resistance in repair motherboard of my friend. None of the experts know the ohm value of resistance R610?

  As you can probably tell from the image, below, I accidentally ripped out all the pads of twelve 12 pins on the motherboard for FFC connector JP36 (pictured below), so I have to fill each of the connections with wire 30AWG pin connector FFC (JP36). That said, I have been unable to trace the pin #10 connector FFC to any component on the motherboard, so my last question is the following:

  QUESTION #2: Regarding the twelve 12-pin FFC connector as shown in the image below (component no. PCB: JP36), which component pin #10 connects to the motherboard?

  Any help would be DEEPLY appreciated!

  

  I thought about it, so I thought I'd post the answer just in case someone else has the same problem in the future.

  R611 = 0.1 Ω

  R610 = 0.1 Ω

• ACL VPN question

  I have two questions that regarding ACL is used in the instructions on the Card Crypto:

  1. the two devices VPN should have the same ACE in the ACL? I know that without the second ACE site B below will not see as interesting udp traffic, but the will of the vpn tunnel fails because the ACL is not the same ACE?

  That is to say...

  Site has

  Access-list 110 permit tcp 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  Access-list 110 permit udp 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  Site B

  Access-list 110 permit tcp 10.0.2.0 255.255.255.0 10.0.1.0 255.255.255.0

  2. once a tunnel is established it will send ANY/ALL traffic destined to the remote network through this tunnel. If the first ACE in the ACL 110 to Site A list is used to bring up the tunnel, only tcp from to 10.0.2.0/24 10.0.1.0/24 traffic will use the tunnel or all traffic from 10.0.1.0/24 intended for the remote network to cross the tunnel?

  I guess my thought is this. The ACL is only used to determine valuable traffic and once the tunnel is up it is a free for all. Or the ACL only allows traffic that meets the criteria specified in the ACL list to flow once the tunnel is established?

  Thank you

  Brian

  Brian,

  Your statement

  'Or the ACL allows only traffic that meets the criteria specified in the ACL list to flow after the tunnel is established'

  Is correct, only the traffic that meets the ACL crypto will go through the vpn tunnel and all other traffic will be denied. If you need UDP traffic to travel through the tunnel, you need crypto ACL on both sides and not only on one side, that is, SITE A.

  Hope this helps,

  Jay

• [Issue] [CS5] With the help of. send() and some other questions

  Hi guys in these last days I made research Stratus in CS5 hoping to be able to reproduce some kind of multiplayer game of him. The main problem that I ran in use. send(), I can't understand how to use the correctly. This is what I understood would work, but it doesn't seem to register that something happened:

  var myString:String;

  function sendmsg(2) (event: MouseEvent): void
  {
  myString = textInput.text;
  outgoingStream.send ("msg", myString);
  }

  function msg (myMsg:String): void

  {

  myLog.text += myMsg;

  }

  Any help to do this would be greatly appreciated.

  Just a few small questions about Stratus I want good answer:

  1. Use. more faster/more efficient send() then post where a fraction of a second account (sending players positions) where there are 4-8 people?
     
  2. When you use a NetStream with an attached how GroupSpecifier know when a person has joined or left?

  Note: All questions are regarding the CS5, not Flash Builder as I am not very aware if there is any difference in coding.

  NetStream.send () should generally be faster than NetGroup.post (), especially when using NetStreams 1:1 (vs. Group NetStreams).

  When groups are great, there is no average liabilities to say when members join or leave.  However, for small groups (less than 15 members), they will be "full mesh", meaning that each Member is a direct connection to every other Member.  When this is the case, you can see the events of NetGroup.Neighbor.Connect/Disconnect on a NetGroup.  to receive people, you create a network group with the same groupspec than your NetStream and listen for events from NetStatusEvent.NET_STATUS.

  your "msg" function must be a method on the 'customer' object of the NetStream subscribed to receive the NetStream.send (s) of the editor.

  It's all generic ActionScript stuff.  I don't know how to use Flash CS5, but such things should all be the same in Flash and Flash Builder.

  -mike

• Before wiring to two packplanes on RD650

  Hello!

  We have two backplaces installed in our RD650 fron, but the wiring for them is a little funky. In the original game to the top, the power supply cord (yellow) is connected to the motherboard. When we added the second room, it was supposed to plug at the rear of the power supply in place. There are two slots on the back of the power supply and the other on the motherboard. Should pass us the original power supply motherboard or anyway does it work? One way works best?

  Thank you!

  Hello

  Thanks for your question! Regarding power, it does not matter where it is plugged. You can choose as well plug in the ports of the PSU, or 1 on the system board and the other in the port on power supply. Either way should work and they both work to her even as it is just feeding the bottom of basket; No data is passed through the power cables.

• After my wife 5 iphone update ios 10.0.2, ringtone sounds is more when a call comes in.  What should I do?

  After the update my wife 5 iPhone and my iPhone 6 ios 10.0.2, we met problems.  His phone will not ring when a call comes in, and my phone does not sound an alert when a message arrives.

  Hi MikeDallos,

  I understand that after your wife 5 iPhone update and your iPhone 6 the new iOS, you both know questions in regards the phone doesn't ring do not or may not alert you to the alert notifications when you receive a message. I use my iPhone all the time and I count on the possibility of having my phone alert me for incoming calls and messages. We'll see what we can do.

  The first thing I want you to do is to restart the two iPhones. Make sure that your wife's iPhone has the ring/silent switch on mute.

  Restart your iPhone, iPad or iPod touch

  Here is an article that goes on measures to be taken for this issue:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker

  For your iPhone you did not give a warning sound with message notifications, you'll also want to review this article as well:

  Use the Notifications on your iPhone, iPad and iPod touch

  Please tender back if you still have problems.

  Have a great day.

• How can I turn pop-up blocker on or off in the browser?

  my email will not let me view attachments

  You have 2 different questions and it is difficult to answer without develop you. Is your question in regards to Firefox OS (the operating system mobile) or Firefox for desktop computers? You posted your question under the Firefox OS product.

• Disk is too slow or overloaded system

  In one of my projects, every time, he gets at the helm of the 9 it still gives me the "disk is too slow or overloaded system' warning. I have 24 GB of RAM, 6 core 3.33 ghz processor, my project running on an external hard drive, and I froze all my tracks with the exception of a few. I'm still all my bounced based vst tracks audio tracks as well. This message appears every time in the same exact spot of the song, which isn't even the most complicated part of the song. However, there is no problem to any other part of the song. I do everything at sampling frequency of 96 kHz, which I regret now and is probably the most problem, but nobody knows what I can do to fix this? Also, I have increased my buffer size, did know of course other programs were running and still nothing.

  Are there audio recorded into your song? If this isn't the case, you can set the 44.1 kHz sampling frequency. The question with regard to your question is: what happens at the bar 9? Try to mute the titles one by one until it clears up the question. A screenshot of your project can also help determine the problem.

• Satellite C660-155 - no sound with headphones, fair speakers

  Sound still come from the speakers when the headset is connected. I've been through all the settings in the sound Manager and cannot find that anything related to the headphone jack.

  I've seen quite a few similar questions in regard to other laptops Toshiba, but none of the C660.

  Any ideas?

  Hi Doris,.

  You use the preinstalled version of Windows 7 in Toshiba or your own installation of Windows?

  Normally if you plug in headphones a window should appear and ask you for headphones or line out output. You see this window?

  If this isn't the case, I recommend reinstalling the audio driver. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite P300 does not load

  Hello.

  I have Toshiba Satellite P300. It's almost 4 years.
  However, 3 months ago it started not not to charge the battery. I removed the battery and the computer left only with the adapter.
  Now it does not charge to one, I have to wait until electricity or sth will reach a level to start the computer.

  So, please help, if anyone has had similar problems or know the reason why and what to do.
  Maybe its adapter problem, or something wrong with the connection between the adapter and the pc. I don't know and have no money yet to check it out.

  Someone knows what's the problem? Thank you.

  Hello

  These issues can be related to different reasons;
  -AC adapter problem
  -Question-motherboard (I especially m thinking to provide electronic problem)

  But I don't think it could be malfunction AC adapter because the laptop can lights after either a specific power level reached or laptop can start after a longer time being connected to the power adapter. Is this good?

  Well, looks like a mobo problem but it's just a suggestion
  The parts must be checked first, before replacing

• Drop down address bar

  I don't know if the name 'bar' is right, so I describe first, which I'll talk.

  On the right side bar which is used to type in the URL is a yellow star to bookmark sites. On the right side of this star is an arrow pointing down. If you click on this button (without having anything typed in the address bar), a list of URLS appear. My questions are regarding the customization of this specific list.

  In Firefox 3, 10 URL was listed when I clicked on the arrow. Since I updated to Firefox 4, the list consists of only 4 URLs. How can I change back to 10 URLs?

  In addition to this, the list is not accurate. I think he should show my most visited URLs, but some sites I visit several times a day, are not listed. How can I add something to this list?

  I hope you understand what I'm talking about. Since it is quite specific, I have found no help on google. I use Firefox 4.0.

  Do you use the FastestFox extension?

  Bar 4 rental Web sites: FastestFox Options > general, uncheck the 'Awesomebar improving '.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Portege M600 - noise - No. audio output device

  I have a little problem with my Toshiba M600 too, it was fine until now, sometimes available noise, sometimes "no audio output device. Initially, I thought it was a driver problem that I cannot solve the earlier. So I thought to go ahead with the installation of Windows 7 to replace Windows Vista, I erase any of the recovery partition just a main. After that's done, the audio problem persist.

  I tried all of this, using windows generic drivers, Toshiba drivers for Windows 7 and Vista. Latest audio driver of the brand audio, the most recent to the old. Formatted several times, all done. Even made a full recovery of the system to the original with the recovery disk configuration, some time, sound works and sometimes does not.

  I can conclude that it's a hardware problem and not the driver.

  Just my 2 cents.

  > I tried all this, using windows generic drivers, Toshiba drivers for Windows 7 and Vista. Latest audio driver of the brand audio, the most recent to the old. Formatted several times, all done. Even made a full recovery of the system to the original with the recovery disk configuration, some time, sound works and sometimes does not.

  Strange. Very strange, I think it could be a hardware problem I m thinking about question motherboard because the sound chip is part of the mobo.
  If the problem persists even using the Toshiba Recovery then drive a hardware problem is more possible as only a software problem
  In addition, it is difficult to say which could be bad, since this question is not always, but sometimes only, which means that it would be difficult to reproduce this problem

  and that's why I think that this could be a mobo problem