question of 6.6 and Hyper-v vFoglight

Similar Questions

• Ping issues - Windows 2008 R2 and Hyper v2008

  Hello

  I'm looking for a few windows networking procedure of experts here to solve these 2 problems.

  I'm very good in Linux but not in windows, networks than some basics on windows of course.

  I installed Windows 2008 R2 and Hyper-v 2008 on two machines different level of "WORKING group" because I'm small laboratory

  I done the settting up the ip addresses static, of the hostname (s) on those computers.

  Windows 2008 R2 => 192.168.1.60 - obiee

  Hyper-v 2008 => 192.168.1.61 - hyperv2008

  I have DNS running on 192.168.1.10 server and my linux local dns host: narayana.local

  I can ping linux boxes ping, ping hyperv2008 obiee hostnames - works perfectly

  I have a few problems in the windows operating system

  (1) i cannot set my computer full qualified domain name say obiee.narayana.local, hyperv2008.narayana.local - it can be a low priority

  (2) i don't can't ping using host names of these 2 machines - priority issue, I get a message

  C:\Users\Administrators > ping hyperv2008

  Ping request could not find the hyperv2008 of the host. Please check the name and try again

  = I can ping IP_address - works perfectly =

  (3) in view of these questions I can't control my hyper-v to obiee machine.

  Waiting for your early resolution

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  I forgot my security question answer Apple ID and my recovery email address has since been deleted and disabled. How to get answers to security questions and or change my email recovery?

  Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

• Question about Powerconnect M6220 and out-of-band/management 8024-K connection

  I'm sorry if this question belongs to another section, but with regard to the functionality of these switches I thought I would start here.

  My question is, the M6220 and 8024-K out-of-band connection are going through the connections on Board (for example port 18 for example) or through connection of the M1000e CMC?

  The reason for this question. We recently vlaned our network and CMC modules are VLAN 8 (10.100.8.0 255.255.248.0) and management of our switches is supposed to be on the VLAN 1 (10.100.1.0 255.255.255.0). I can't ping on the affected IPS (IE 10.100.1.15), but our CMC modules are fully accessible (IE10.100.9.120). Our blades are fully accessible and can access all the VLANS on them (they are the ESX host).

  Finally, I'm sorry if all necessary information has been provided, I'm not so much a networking guru.

  Thoughts?

  Thanks for your help

  The OOB interface is connected to the chassis management controller by the median plane of the chassis. Traffic on this

  port is separated from network traffic operating on the switch ports and cannot be lit or routed to the operational network.

• Exclude the host and guests of vFoglight

  I would like to know if there is an easy way to exclude a single ESX host and guests of vFoglight. I have a crowd noisy lab (w / 40 guests) I want to exclude from dashboards, alerts, reports, etc.
  Is there a simple way to do this?
  We run vFoglight Pro 6.1, build 5.5.4.4
  Thank you very much
  Tristan

  The response of a search engineer - Administration - power outages.

  Here you can configure a power failure permanent alarm or data collection in cluster or datacenter (or many other types of target.)

• What is the difference between containers and hyper-v server windows?

  Hello

  What is the difference between containers and hyper-v server windows?

  Thank you

  http://windowsitpro.com/Windows-Server-2016/differences-between-Windows-containers-and-hyper-v-containers-Windows-Server-201

  PS: Where's your homework due?

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements.  I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to foru

  I'm lost here.  I left a message in the discussions [4 years PS E7 problems developing -?] and he was moved to the "Forum elements. Yes, I was wrong. I come here and there are about a dozen question back 4 hours and no sign of page numbers.  Not a total newbie to forums, but I'm lost.  8-)

  I searched "4 years PS E7 developing problems...» "and couldn't find even in Discussions and notifications that it has been moved.  I would have thought that a search would have led me on the Forum of items with notes as to how much, if any, had read it.  This is what I'm used to.  As I said, I'm lost.  Sorry if it should be obvious, and if I look like a whiner.

  Viewerx wrote:

  Oh, so it has been moved, but still listed in the Discussions?  You could say that.

  When a thread is moved, it will also appear in its place of origin for a short period in order to allow the original poster to find.

  I didn't know where it was posted.  I'm not a moderator and couldn't have moved it.  Only, I went to your profile and watched your activity:

  

• VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.

  This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.

  Can I make for happy? (Hyper V might have to win here... sigh).

  VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system.  It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM.  With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.

  So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM.  It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.

• I have a question? credit card and paypal are the only way to pay?

  I have a question? credit card and paypal are the only way to pay?

  Yes, the command line options are

  Adobe store	Supported countries	Payment options
  North America	To the United States, Puerto Rico, Guam, other U.S. territories, Mexico, and Canada	MasterCard, Visa, American Express PayPal for purchases of software, book, support and fonts. (You can not use PayPal to purchase subscriptions).

  You can buy retailers such as staples, amazon the redemption code or key card subscription. You'll have the linerty to choose the method of payment then.

  Concerning

  Baudier

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Comparison between ESX 4, Xen and Hyper-V

  Hello!

  Someone at - it a (new) comparison between ESX 4, Xen and Hyper V? Management performance, stability, cost and so on.

  Thank you to

  Hello

  Visit this link for the last comparison http://www.it20.info/misc/virtualizationscomparison.htm

  http://ctistrategy.com/2009/08/18/VMware-vSphere-Microsoft-HyperV-whitepaper/

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.