Question of Admin RV120W - large scale deployment

Hello:

I've been doing demonstrations of the RV120W for review of deployment for a "large-scale SOHO deployment", maybe hundreds of sites. While I'm not a big fan because there is no CLI, to an interface web, the RV120W seems to do everything I need it to do on a basic level. However, since there is no CLI, is there a way to eat these for a large scale deployment? For example, is there a way to backup over the network configurations, or a way to make changes to configuration to all routers at once, on the automated plan, such as CiscoWorks, or another tool? I have not found or read anything that would be apt for this router...

There are no tools for mass deployment. Everything as it goes is to do a "master config' charge to each router and then adjust the unique attributes. I think in all areas, it will be a tedious process.

-Tom
Please evaluate the useful messages

Tags: Cisco Support

Similar Questions

  • planning a deployment on a large scale with flash media server 3

    Hi all

    I am looking to get hold of the white paper entitled "planning a deployment on a large scale with flash media server 3.

    Anyone have the link? I know something similar?

    Andy

    Hi Andy,.

    This document is not yet publicly released. It will be published shortly.

    Thank you
    Swathi.

  • Resizing of large-scale printing technique

    Hello Photoshopers.

    IM soon on the ground of the web printing, so I'd like to collect information about large scale printing techniques.

    I know for a given fact that a document be clear should contain enough pixels for the width and height to 300 DPI print immaculate.

    But not all cases are like that, and sometimes some pictures could be old and do not provide enough information to be printed clear.

    So my question today is as follows.

    e.i:

    A customer brought me her favorite photo and he wants large format poster for this wall 2 x 2 meters, seeing from close distance.

    so I open the document and see the following:

    Width: 991 pixels

    height: 678 pixels

    resolution 72


    (A) is there a way to make the customer happy without printing bad result?

    (B) what would be the best values to enter in the new document?


    (C) I did a paper 200 x 200 cm 300 DPI and the photo resembled a small thumbnail

    in this painting, I then scaled canvas size and zoomed to 100% image deteriorated.

    I tried to keep it as a smart object, but always the detail has been lost.

    U2A070.jpg

    Techniques and the info much appreciated thanks.


    As the proverb says: "Garbage in - garbage out." There is little you can do with a small image. You can try resampling using preserve details and maybe try a camera shake reduction after that. You can also try other software like Genuine Fractals, but you won't get good results.

  • Get some APs to join a vWLC large-scale which replaces a small scale vWLC

    Hello everyone. I'm in a bit of a dead end. Here's our situation:

    • We have two vWLC on a small scale (.210 et.211), each with 200 AP licenses max. They are both on the 8.1.120.0 version.
    • vWLC.210 is maxed out et.211 is halfway there, as far as APs go. All APs are AIR-CAP702I-A-K9.
    • We recently bought APs more, but it was unclear, these APs are now 702i-B, which works with a newer version.
    • We were already looking to upgrade le.210 to a vWLC on a large scale, but ran into problems (error attached screenshot) and for some reason any could not do.
    • I was on vacation (a week or more), came back and my colleagues have already implemented a new and large scale vWLC, running version 8.2.111.0. His IP est.212.
    • So now what we're trying to do is to have the + 300 APs connect a.212 the most effective way possible.
    • One way that we figured out to hover over an AP has been put by default, but it would be horrible.

    At this point, we are eager to have a single virtual controller (large scale) for all the APs. If someone managed to upgrade small-scale (version 8.1.120.0) large scale (version 8.2.110.0), which would definitely be the way to go. I couldn't get this error with our support team.

    If we cannot go from small to large, then the second option could migrate their all new, large scale (. 212) controller. What would be the best/effective way to do.

    Thank you

    I just deconnecter.210 the network vWLC and edit the new vWLC at the same IP address (. 210). In this way, all of your AP must register with new vWLC.

    If you intend to use these vWLCs, you need to change the PDC of each AP (under AP config - tab that high) to new vWLC name & IP management. You can do this via vWLC CLI as well. If you get all the details of your AP, you can prepare your config in Notepad & applied only once. (first test & make sure it works for you)

    (WLC) >config ap primary-base <vWLC_Name> <AP1_Name> <vWLC_mgt_IP>(WLC) >config ap primary-base <vWLC_Name> <AP2_Name> <vWLC_mgt_IP>.(WLC) >config ap primary-base <vWLC_Name> <APn_Name> <vWLC_mgt_IP>
    HTH Rasika * Pls note all useful responses *.
  • Line appears when you apply the drop shadow on a large scale

    Hello!

    A few weeks ago, I had to make a graph on a large scale (800mmx2000mm) a roll-up banner. I wanted to apply a shadow to a rounded shape and ugly lines came. Because it's a little urgent, I decided not to use.

    But now I'm curious, so I quickly made an ellipse and added a shadow, so you will know what I mean. This also happens when I save it in pdf or image format.

    Screenshot 2013-11-07 at 03.45.31 nachm..png

    Maybe one day I'll have to use a drop shadow on a large scale. Then, someone knows how to fix this problem or what I could do in case I need to use this effect in these conditions? I use Illustrator CS6 in Mac with the Mavericks.

    Thanks in advance.

    Check and see that it is also.

  • Why sometimes placed images open in CS2 on a large scale?

    I work with CS2.

    Lately, sometimes when I use the command set, the placed image is on a LARGE scale.

    Files that are .jpg and .psd, are no different - so far as I can see - files that are functioning normally.

    Try to open an image file in Photoshop to see what his physical size, in pixels, but also in inches/centimeters.

    If the image is too large in inches/centimeters you can adapt it in Photoshop without resampling increasing its effective resolution.

    Illie believes the values of inch/centimeter of Photoshop.

  • AP large-scale deployments... DHCP or static IP address?

    Simple question (s):

    If you are a big corporate customer that controls devices with HP OpenViiew, you deploy hundreds of wireless AP with DHCP, taking advantage of the ease and convenience DHCP gives you or, statically assign you the AP IP addresses so OpenView always knows where to find them, accepting the hassle of having to perform the task assignment IP address any time there is a replacement of the AP?

    (Please don't tell me that you have to manage all the AP with an owner Cisco management console - without HPOV, in this case, is not an option.)

    If you have worked or been around large deployments of AP wireless, let me know what you saw out there and why.

    If you have a Cisco reference architecture that recommend one method over the other, just direct me.

    Thank you
    Mike Prescher

    Well... I staged of the AP is easier for me to create a spreadsheet with the hostname, scan in the serial number, mac address, enter the location and ip address.  I've done big installs that may include WISN 12 and continues to grow... all with static implementations and small all with static.  I see how it is and access point is a network device, so are any of your other network devices via dhcp or same servers configured for dhcp?  Customers usually have some kind of monitoring tool and to have a change of ip address for some strange reason, and monitoring tool showing a device different is not a good thing.  DHCP is easy and is not a bad option.

  • [JDev12.1.2, ADF, GlassFish 4] A few questions on the tutorial of Shay "Deploy Oracle ADF Essentials Applications to Glassfish"

    Hallo (Shay),

    I want to deploy my application Web ADF to GlassFish that is installed on a different server from the development computer.

    The application interacts with a MS SQL Server database.

    I have some doubts/questions on the tutorial of Shay https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to

    So far in the development phase, I deployed the application only to the JDeveloper-itegrated WebLogic Server on the development computer.

    Creating a connection pool

    • I could successfully creates a pool of connections only by copying the sqljdbc4.jar library in the C:\glassfish4\glassfish\libdirectory. Is this OK or should the library remain in C:\glassfish4\glassfish\domains\domain1\lib?
    • Is there a way to hide the password in the additional properties?
    • Is there any setting for the property should do (especially for MS SQL Server)? For example, somewhere I read that the isolation of transactions should be set to read uncommitted... but I did not understand why.
    • What is the difference between types java.sql.DataSource resources and java.sql.XADataSource?

    In JDeveloper application configuration

    • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) set to java: comp/env/jdbc/MyDatabase_DB_SQLServerDS. If I change this field value to jdbc / < name_of_jdbc_resource_created_in_GlassFish >, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What's wrong?
    • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

    Taking care of the libraries used by the application

    • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files I put in C:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

    Other questions

    • What is the difference between putting a library in the lib of GlassFish folder and put it in the folder lib of Domain1?
    • Deployment procedure used by Shay in his tutorial might also be used to deploy the application on a remote production server?
    • Is there a way to manually delploy an application, for example by copying manually under GlassFish project folder?
    • My final goal is as follows. I have a clean Setup that allows me (1) to continue to run the application in JDeveloper on its built-in WLS, (2) to test the application to the GlassFish that I have installed on the computer development and (3) delploy the application on the remote production server. Could help me do that?

    These are a lot of questions.

    I thank in advance all the users who want to respond and I hope that the answers to these questions will help also others.

    Ciao,.

    Federico

    Federico - most of your questions is generic Glassfish questions that do not specifically have anything to do with ADF - I recommend that you post on the forum of Glassfish. (Or read the Glassfish documentation for things like the difference between directories and deployment/admin console).

    >>

    • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) parameter tojava:comp / env/jdbc/MyDatabase_DB_SQLServerDS. If I change the value of this field of jdbc /, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What is the problem?

    This is because JDeveloper uses an integrated WebLogic when you run and therefor cannot use the data source of Glassfish.

    I suggest that make you this change only when you go to deploy on Glassfish.

    >>

    • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

    We don't know, as the matrix of certification for the ADF will show that we have not tested/certified this combination.

    Oracle JDeveloper and ADF 12 c (12.1.3) supported systems

    >>

    • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files that I put inC:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

    Use the properties of project-> libraries and class path to add the jar or create a library and add it to your project.

    Make sure that this library is deployed by default.

    >>

    • Deployment procedure used by Shay in his tutorial can also be used to deploy the application on a remote production server

    Yes

    > Is there any property setting should do (especially for MS SQL Server)?

    Oracle ADF business with several databases components

  • Question on NAS200 and large amount of data to him.

    Hi all

    I have a Linksys NAS 200 on my home LAN.  It is connected via a 1.1 WRT300N wireless router.  I have my computer connected to the router via a cable (not wireless).  I am running windows XP Media center SP3 on a HP duel core processor computer.

    My problem is that I'm trying to move a large number of media to a failed drive on my computer to a drive on the NAS 200.  There are about 1.3 TB of info and when I try to copy in windows Explorer it takes forever and consumes a lot of time my computer CPU.

    Are other than copying small amounts of these data over time as 3-5 gb each night there other options?  Maybe a program that works like a web browser download manager?  I'm not too good with FTP solutions, but maybe it would work, but I don't know how to set up.  Could this be something with how I set up my router?  I use my router as my firewall and my computer does not have a firewall.  It has spyware doctor and Ad-Aware of protection running.

    Any help would be appreciated.

    Thank you

    Steve

    Robocopy has an option to limit the bandwidth network, this will also limit the CPU usage (both on your Windows machine and the NAS).

    For others, try Googling "windows copy bandwidth limit" or "copy windows limit UC" (without the quotes).

    = Jac

  • Can I get a larger scale FYI color (F6) when you change the picture monochrome or grayscale?

    Hi everyone - thanks in advance for any help you can offer.

    With a regular color photo, in the color window (F6) you can get information from 1 to 255 for values R, G and B, which is very useful. However, when I convert to monochrome grayscale, scale and then goes from 1 to 100, which is a significant loss of sensitivity. There was a time when the converted monochrome image showed a scale of 1 to 255, but I don't have enough attention to how I realized that.

    Anyone know how I can convert my full color image in monochrome or grayscale, but keep the color scale of 1 to 255 instead of 1 to 100? Or better yet, if you use the scale of 1 to 100, is it possible to add a decimal point so that you can get for example 53.7 instead of just 53 or 54?

    much appreciated,

    Look in the Info Panel... you see the displays? See the small triangle there? Click on it to access the options to change the display. Select RGB and the display will show 0-255. You can have the display of the first to be 0-100% and the second to be RGB that will give you 0-255.

  • Can I combine things large scale together?

    without spoiling their proportions between them? Do precomp and expansion which result in blurring of the resolution.

    Create a null parent required objects for the Null value, then the scale of the Null value.  Delete the Null value when you're done, if you wish.

  • Solution to large scale y480 problem?

    I was faced with a problem that others seem to be dealing with (without success).

    The problem centers around the Lenovo y480 and running games graphically intensive (such as Battlefield Bad Company 2). While the exact demonstration of the problem varies, in my case, it occurs after trying to play Battlefield Bad Company 2 on Steam, I get something called "Application did not start: error 51.»

    51 error occurs usually when a program interferes with steam, but this isn't the case. I started in diagnosis Mode, where none of the non-Microsoft programs or the service (including firewalls and anti-virus programs) is running, and again, I got the error 51. Obviously, it's a problem with the y480 himself.

    I think that the problem lies in the drivers NVIDIA GeForce 640 M of the of the THE card y480. However, Lenovo Web site has drivers who seem to have broken. For example, when I try to install the nVIDIA drivers, I have the following error: "nVIDIA GL1(QS/PS): installation file cannot be found."

    I even used to Lenovo OneKey Recovery software to restore my computer to factory settings, and I still received the error with steam.

    This isn't an isolated fact impact, as it is clearly within the walls. Anyone know what is the source of the problem, or how it can be fixed?

    Thank you very much for your help.

    I solved the problem. Download the drivers on the Lenovo support site. When you click on the exe file, it will give an error
    Records have always from the right hard disk. Go to the hard drive and click on nvidia or drivers. Don't remember which. There will be two files, one with a 'Gl1' other 'Ge' ge one-click. Go to the bottom and double click on the Setup icon. It will install the 295,55 drivers nvidia. The current drivers of stock are 290.56. Its games once installed steam all works.

    I am doing this memory I hope it's clear enough. Just be aware that drivers on the Lenovo site are beta drivers. 295.55 is a beta version. They work a lot better for sure, but we must push Lenovo to get new operational pilots. This driver is 28 January 2012. Stocks are last December lol.

  • Large scale analog phones on 8.6 CUCM

    Hi all

    the need is about 500 phones analog connection to 8.6 CUCM.  Someone at - it a way to get that many phones analog cm use something else (read cheaper) than VG224s?

    Thanks in advance!  All the answers have been evaluated.

    New VG350 GW is the other option:

    http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6790/gatecont/ps2250/data_sheet_c78-710996.html

    Well I did a comparison of cost, if you do one, make sure you consider annual smartnet support, energy consumption, etc.

    HTH,

    Chris

  • even if I create an image of large scale when I save in png and try to zoom his as dimmed and pixels are like big boxes, so if I print I get the original photo of clarity that I created in photoshop?

    unknown

    If you create a document 5000 x 5000 pixel, added text on the subject, then it would print in nearly 20 "x 20" at 250PPI and text would be reasonably strong.

    Note: If your image is enlarged to a much smaller size it will be pixelated. You must add the text after enlarging the image or start by creating the largest size document from the beginning.

  • Question of Admin areas in 4.0.1.836

    I've updated 3.3.0.747 (64-bit) to 4.0.1.836 (64-bit)

    3.3 had been installed in c:\Program (extracted zip to) Files\Oracle\datamodeler

    I've renamed this c:\Program Files\Oracle\datamodeler33 in case I want to go back

    I unzipped 4.0.1.836 in c:\Program Files\Oracle\datamodeler

    Data files for mold it data located in a folder outside this structure. (under C:\Users\...\Documents\...)

    When I opened my existing models, everything seems fine.

    I open the Administration areas

    I chose one of my domains (MyDomains.xml) files

    Areas seem to load fine.  I try to add a field (indicate name, logical Type digital =, size = 9) and click on apply

    Error message: "file name of invalid areas. supposed defaultdomains.

    New domain is not registered or added to the fields in my current model.

    Is this a bug or something I misconfigured with my installation?

    Hi Brian,.

    I could not reproduce the problem. Can you give us more details about your efforts?

    I chose one of my domains (MyDomains.xml) files

    It is a file which resides in the directory of your design? If so you do not need to open this file explicitly - just add domain and select a file in the "File areas" drop-down list box, or type a name for the new file.

    The "file select areas" (when you select the file in the file system field) is useful when you want to prepare the file with the fields that will be used in several places - drawings, computers.

    Data files for mold it data located in a folder outside this structure. (under C:\Users\...\Documents\...)

    Can you give the full path to that file of the areas?

    Philippe

Maybe you are looking for

  • Re: How to remove programs on Satellite M300?

    When you go into control panel ther is no icon of uninstalling programs?So, how can I delete unwanted programs, I use Vista... Thanx for you help

  • addition of tables 1 d of different length

    Hello I have a set of tables 1 d of unequal lengths generated out of a FOR LOOP. They look like this: Table 1: 1 2 4 5 3 6 7 6 0 3 Table 2: 2 6 0 7 3 0 3 6 5 Table 3: 9 2 6 1 7 9 4 0 etc. How can I add toghether way out of the table following 1 d: 0

  • Save, cut, copy, paste are grayed out in Word 2003.

    I don't know how it happened, but in Word 2003, XP, many menu items are grayed out such as Save As, cut, copy, paste and many other options.  How does this happen, or more important, how can I activate this return?

  • Not printing in black

    OfficeJet 6500 has stopped printing in black, there's ink in there and it's real Hp. Any thoughts?

  • Can't find Sticky Notes!

    Can't get Sticky Notes under accessories in the start menu. Recently, I ran a software shortcut Fixer and I think that he got rid of sticky notes. What can I do to get it back?