Question of Chipset IEEE Tecra M5-389

Similar Questions

• Wireless Chipset in Tecra M10 - 1CH

  Hello

  Please can you me the Chipset wireless full in Tecra M10 - 1CH?

  Thank you.

  You mean what WLAN card is inside or what?

• Question about the Bios Tecra 8100 2.5

  Hello
  I installed the latest version of the Bios on my tecra 8100. My Question is, what is the maximum size of hard drive for these phones? Now I have 13 GB hard drive, but I want to have a bigger. And 512 MB of Ram is the maximum, right (2x256mb)? Can I adjust the size of the videoram?

  In my view, the tecra 8100 is a laptop very well.

  Greetings,
  Stephan

  Hi Stephan

  You are absolutely right. 512 MB of RAM is max for this pretty portable. If you want to buy more RAM I will suggest you that a PC100 256 MB (PA3051U-1NME). This RAM is tested and working properly with your device.

  Sorry, but video RAM is not possible to extend. And now something on the HARD drive. Unfortunately there is no documents where you can find information like this, but I know very well that here should not be a problem with 30 or 40 GB of HARD drive.

  I wish you lots of fun with this laptop old but nice.

• Question of chipset G35 IPIBL-LB

  I have a question that drives me crazy, is my card mother sli compatible, because I was looking for more graphic power, but I don't know if it is or is not

  Your a6654f pc does not support SLI. E chipset supports 1 pci express card.

  -supports 1 PCI Express x 16 slot for external graphic support

  I'd get a good video card and upgrade of power also because it's 300W.

• Question about CPU on Tecra 8100

  Hello.

  I think I bought the toshiba tecra 8100 on summer (when I had the money), but I have question. What is this laptop processor?
  I read it as 600 mhz, 700 mhz, 800 mhz and 850 mhz, but what really are? Or it's possible overclock via the bios etc?

  Hello

  I Don t understand the question is what a laptop processor. It s the thing that makes your 'computer' computer or think. No matter what.
  The speed is set in Mhz, so it depends on the model how Mhz, the processor of your machine has.

  The exact clock speed is written on the label on the bottom of your machine. You can also try CPU - Z to determine the exact speed of your processor.

  And NO, not possible to overclock the CPU of machines it s.

  Welcome them

• Question about viewing on Tecra W50-A-104

  HI, I red a good review on the Tecra W50-A-104 on notebookcheck and they say it rises from this Panel and it is a very good display:

  * 15.6 grips 16:9, 1920 x 1080 pixels, TOS508F, IPS LED, 92% sRGB, brilliant: No. *.

  But if I go to the Toshiba.de I see that specifications are:

  * type: anti-reflective display eDP Toshiba Full HD TFT high brightness with backlight LED, 16: 9 aspect ratio *.

  A TFT instead of IPS

  They are the same characteristics as the W50-A-116, which is available in my country, the Italy. I am interested in the W50-A-116 of course and I want to know if the 116 and 104 times the same mount slab IPS as says the review.

  Thank you
  Haitham Jaber

  Both Tecra models have the same part number - PT640E then I'm 100% sure that both models have the same display. It is 15.6 FHD 300 SFCL LD-DISH EDP (TFT Color LCD IPS) Full HD.
  I can imagine that the description on the Toshiba and some independent Web page is not the same.

  Tecra W50-A-116 with PT640E-06603KIT part number is available in Italy.

• Question about keyboards keys Tecra A3

  I have a whole new Tecra A3 and when you type certain keys randomly will work. Occasions, I can type or press a key several times until it works.
  Is there something I can do before I return it to the dealer?

  Hi Bob

  It's really not easy to say why this is happening. The only thing you can try is to reinstall the OS using the recovery CD.

  In my opinion it shouldn't happen if the unit is a new brand. Please contact your dealer and ask him if you can have another. You paid for a new product and it should work properly.

• Question of chipset on Satellite A660 - 1 H 5

  I recently discovered the problem of chipset in some computers laptop toshiba. Apparently, my laptop is affected by the problem. IM using the Core i7 2630QM.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2926784&PF=true

  It says at the bottom of this page I have us communicate by Toshiba, if I bought the direct Toshiba laptop which I did not. I bought it on this site. What am I supposed to do? I can't find any information on how to return the laptop with a full refund and I can't find any info on my laptop because apparently there are more.

  The link you posted is for US market, but I think that your laptop is not designed for the USA.
  Where you bought your laptop?

• Need help with two questions about preinstalled WXP Tecra A11 - 10F

  Hello world
  hope someone will help me with these:

  1. sometimes left port my A11 USB and eSATA port close do not recognize any device I plug.
  In win7 there is a power management option with which this can prevent to met, but how can I do under XP?

  2 - is there a way I can put a fixed amount of RAM on the graphics accelerator? (The two o/s)

  Thank you in advance.

  Alessandro

  Hi Alessandro,.

  1. as far as I know that this option is not available on Windows XP. Vista and Windows 7 provide several obsolete as XP power management features. All you can do is to install Toshiba Power Saver if it s not installed. Here, you can set power saving for the processor, cooling fan, etc., but USB is not available.
  In your case, I'll try an update of the chipset driver.

  2. No, fixed the amount of RAM can t graphics card game. This will be controlled automatically.

• Question about drivers for Tecra 9100

  My Tecra T9100 do not work with LAN more after the installation of a new HD (old one crashed) and where some Toshiba files on the old HD that I don't know. (Bought the laptop 2. a few years ago by hand) and I lost the CD that belongs to her, and there is no drivers on this site for this 5 year old machine. Maybe a little strange because it's a P4.

  In the list of hardware (control panel/system /) there is no problem with the network card. But at the top of the list, there is a yellow "?" for the UNIT of BASIC SYSTEM and there is the missing drivers.

  It's very confusing to me because I've never heard of these drivers and I don't know which device is the following. There is also a yellow "?" for PCI modem (but I didn't need) so I guess this unit of base system has to do with the PCI-bus and perhaps also affects the LAN card?

  But shouldn't? the drivers will be in the BIOS?
  Can someone help me?

  Hello

  You should take a good look here:

  http://209.167.114.38/support/download/ln_byModel.asp

  because here, you will find all the drivers for your computer. The Canadian site has almost all of the drivers for older machines, and you should really check out.
  I think that "basic unit of system" could be something with ACPI or similar. But lets wait until after you have installed all THE drivers and then give feedback short.
  And no, the drivers are generally not in the bios because the bios is just to boot but it s OS independent.

  Greetings

• question about firewire ieee 1394 via chip.

  I have a hp pavilion a705w, missing a chip called "via vt6307" I see online is for ieee 1394, if I use not any device with a firewire port to this computer if they have problems or be less safe, or that make a difference, the chip has disappeared from the motherboard.

  Hi vilig,

  It is a design of single chip with full "plug and play" capabilities for integration in PC systems and electronic public, equipped with an interface HCI open and logical functions initialization and bus arbitration.

  Flexibility
  Has 2 ports supporting transmission rates up to 400 Mbps, allowing the use of multiple devices broadband simultaneously.

  If the chip is placed on the motherboard, it would be preferable that you contact the manufacturer for help on this issue.

• User manual to fix Tecra A50-A-151, model No. PT644E

  Hello
  When you try to download the user manual for a Tecra A50-A-151, model No. PT644E, I offer three choices.

  How can there be three?

  Although they have posting dates different all three appear to be the same and labelled 'first edition August 2013', even if they have different file names.

  Who is the right one and how do I know which figure in the 'Grand Tour' is supposed to be an A50 - A and nothing else? (I do not have an A50 - in front of me.)

  Thank you.

  I'm also a little confused about this but I checked two of them and I think they are the same, so I think you can make a big mistake if you download a first or second.

  Great ride is the same.

  You have questions on this model Tecra? Maybe someone of us can help you.

• New HARD drive is not recognized on Tecra M1

  Hello

  I am new to this forum, so apologies if this is an old question.

  My Tecra M1 gave a quality service for the past 6 years, but recently, the Toshiba management console has put a message saying that the HARD drive will fail quickly.

  I loaded immediately turned off my main files before you remove the HARD drive. It is a Toshiba MK6022gax 60 gig IDE hard drive. I bought a new disc of gigabytes of 60 MK6022gax, but when I mounted this same I got the error message "error ide #0". Installation XP or the BIOS can see this new record.

  I then reassembled the old HARD drive, which started OK. I then mounted the new disk in a USB enclosure, initialized, partitioned and quick formatted using the XP disk management. He picked up OK. Then I copied some files to it and read them back with no problems, then the drive itself works very well. But when I plug as the main 'C' drive, I get the error message again and is not recognized by the bios or XP put in place.

  Clearly, there is some BIOS (?) or startup procedure I have to do to get this recognized record. Help!

  I have Tecra M1 long with 60 GB HARD drive. Right now, I've updated compatible HDD TOSHIBA HDD 2184 B.
  I can confirm that the HARD drive is recognized correctly and I actually have the new install of WXP Pro.

  In any case, have you tried to upgrade the BIOS to the default settings?
  As far as I know that nothing should be set before you put the new HARD drive and it must be recognized correctly.

• Tecra S3: hardware upgrade - CPU, RAM, HARD drive

  Hello

  I just got a laptop from my company and it's 2 a bit slow for what I do, so please advise me on a hardware upgrade or point me in the right direction to ask this question.

  My Tecra is S3 model PTS30E - 01P01CG3 Y5120397H series, it is about three years old and I would like to upgrade:

  1 - CPU Intel Pentium M1.86 gHz, I can replace it with a dual core or core 2 duo of?
  The motherboard does it take? What is the most powerful CPU it can use?

  2-ram memory is 1 GB and I want to place as much as possible. 2 GB is the best that I can place?
  Can you recommend a brand of RAM which would give exceptional results?

  3-disk HARD 80 GB comes, and I also want to know if I can replace it with a bigger?
  Than do options GB 120 GB, 160 GB, I have more? These HDD fit as the size in my laptop?

  4-If you have any other recommendation of dope performance, please let me know.

  I live in Romania, I'm not sure where can I make these upgrades. What is the nearest place?

  Thank you and have a nice day.
  Florin.

  Hello Florin

  Tecra S3 is old enough laptop model, and expect too much with upgrades, especially with the CPU. Of way General CPU cannot be upgraded and perhaps should not be upgraded. Each laptop model has a specific design and cooling modules are optimized for the specific hardware platform.

  1. so, for you it is important to have the laptop stable without damaging the hardware. Okay, just for the record
  Tecra S3 comes with separate Intel Mobile Pentium-M processors - [1.73GHz/1.86GHz/2.0AGHz (0.748-1.356V)/2.13GHz (0, 748 - 1.372V))]
  [/ 2.26 GHz (0, 748 - 1.404V)] and these processors operate at 533 MHz bus clock.
  Update CPU not is also not supported if forget it. The CPU you have inside is powerful enough. What you need is more RAM and perfectly configured and optimized operating system.

  2 RAM can be upgraded up to 2 GB and it is not the problem. You can use 2 x 1 GB RAM DDR2-400/533 1 GB (PA3411U-1M1G).
  This RAM is tested and works perfectly with your Tecra S3 of will be.

  3 disk HARD upgrade is also not problematic. Tecra S3 uses SATA HDD and you can improve it with more than 120 GB. I'm 100% sure that you can use 160 GB with no problems.
  In my opinion, that's good enough. Isn t it? ;)

  4. optimize the operating system. Disable all unnecessary background processes and your Tecra will be working perfectly.

  >.. .i don't know where I can make these upgrades.
  Do it alone. It is not so complicated. If you need help let us know.
  Good bye

• Tecra M9 (PTM91E) how to remove the installed software / how to stop HARD drive

  Just having a play with the new "beastie" and it seems to be exactly what I want. However, some problems are annoying me.

  1. the installed bloatware!

  2. the disk drive continually ticks away when the machine is at rest. Investigation with a sniffer package/program indicates that the service of AMT is continually send and receive data packets of bytes 70 to the client on the computer. Every second or two. Using about 2-3% of cpu resources in the process.

  Basically, I use the laptop as a stand-alone work station and see no need to have a service that constantly questions the chipset for so-called mistakes and supposed to be written to the log of sysevent. He feels the potential of surveillance unsolicited - which I suspect that someone made.

  The question is... do I need to have the AMT (lms & ums) software on the system - and if not, can I uninstall stop the activity continuous disc shatter tocking without adversely affecting the operation of the equipment?

  Any advice would be appreciated.

  I am somewhat concerned by the AMT of documentation I've read - purely a question of 'private life '. I don't relish the idea of having someone with intelligence to write external programs that can enter into the bowels of the machine to interrogate harware/bios/sysevents, etc. (even when he is off!)

  I can understand it to a company, IT control aspects, but as a user of the singular that occasionall uses the internet.

  Thank you!

  Hi Ron

  (1) I don't know what bloatware do you mean exactly, but to be honest, there is no installed bloarware.
  Is that Toshiba laptops support different features and different functions that must be controlled by a software/driver. If you would remove such software then you would not be able to use the FN keys for example
  Anyway, if you want to remove some pre-installed applications then you can do this in Control Panel-> programs & features control

  (2) sorry but AMT software does not know me basically there s nothing unusual you HDD ticks from time to time. The same thing happens on my laptop even though that I don t use the laptop. I think that it s a Windows operating system.