Question of CSS: IE7 for Windows does not

Similar Questions

• File server for Windows does not work after security update

  I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.

  Macs have no connection problems in the SMB and AFP.

  Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.

  Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail

  Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.

  Follow the instructions below to change the Windows security settings to allow Windows SMB connections.

  1. Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
  2. Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal).  If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
  4. Restart the computer.
  5. Re-try to connect to the server via the workstation.

  NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.

• service pack 2 for Windows does not install

  Hi, can someone help, I'm not very good with computers but I can't get the update of windows to complete and depends now, my printer does not computer is running really slow, bought a registry fix program did make a difference ruling ever, I tried all the suggested solutions and none have worked. Help, please!

  Registry "fix" programs do more harm than good.

  Largely steer away from them.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Control of the Xbox 360 Wireless for Windows does not work with COD WAW

  Hello, I use the X box for windows pc controller. I have Windows Vista 64 bit installed, and I am trying to play Call of Duty World at War; However in the gameplay, the game does not respond to any controller input. Where this happens, it is indeed the controller wireless for windows with the wireless adapter and yes I checked for the last update and I.
  O.S Windows Vista, 8 GB of Ram, Intel Cor 2 extreme quad, HP laptop

  Hello dtorres17.

  Unfortunately, Call of Duty World at War doesn't support any input other than a mouse and a keyboard controller. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Skins for Windows does not apply on Windows Media Player 11

  I use Windows Media Player 11 for Vista 64 bit and I download a skin and try to apply it to every time it won't work. It only works if I double click the skin file and I won't continue to do it every time. I tried to look for answers to this problem of alreadt, but every single response is to go to http://windows.microsoft.com/en-US/windows-vista/Change-how-Windows-Media-Player-looks-using-skins and it does not at all help.

  Hi Matt,

  You save the skin before applying it or run it directly?

  If you save the skin before applying, you must double-click it to apply. Other wise, you must change the mouse settings to use the single click.

  For more information, you can consult the following article:

  Using your mouse

  Hope this information is useful.

• I just upgraded to window 7 for windows does not start Lightroom 10 6 because it cannot open the catalog or one of my backups

  I just upgraded to window 7 for windows 10. 6 Lightroom does not start because it cannot open the catalog or one of my backups

  Yes, once the user account is the upgrade to windows 10 have permission on the folder of photo issue, which prevents the Lightroom to create the necessary temp file when the catalog is launched.

  This is the reason why I asked to copy the catalog file to another location to narrow down the reason for the problem.

  Thank you

• Installation of Web premium CS5 for Windows does not

  Hello

  I have changed my PC and uninstalled the Web Premium CS5 for Windows on my old PC.

  I went to the LWS site to download installation (zip and exe) on my new PC (Win 7) and launched the exe files.

  Files have been decompressed, but when the process terminates it does not launch the installation at all. Nothing happens!

  Please could you help me?

  Thank you very much in advance :-)
  

  Thanks for your help.

  When I checked the log files, I realized that it was not all newspaper!

  If the exe has not made the installation at all.

  I therefore uncompressed manually the zip file and manually installed as well.

  It worked! :-D Thanks again

• HP Deskjet J110: 8.1 for Windows does not recognize Deskjet J110, does not print. Drive of reloads.

  DeskJet J110 does not test page print.  Removed the printer and reinstall, USb not recognized. Charges such as LPT1. Tried unplugging, reboot and reconnect. Same result.

  Hello Floadnar,

  Have you tried with another Usb cable? DC said that "usb not recognized it. You should check also Device Manager for universal serial bus drivers. Finally, you can try to connect both usb cable to check the work of regular printer usb socket or not. you don't need to install the driver. Simply connect the usb cable between the printer and PC. If both USB works with off problem that should not see the unrecognized Usb device message.

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f

  My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.

  System information:

  Processor: Intel Core i5-4210U CPU @ 1.70 GHz

  Current processor speed: 1700 MHz

  Memory size: 8192MG RAM

  BIOS date: 20/09/2014

  BIOS revision: M74 worm 01.05

  I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.

  How can we try to repair Windows rather than recreating the image?

  If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.

  Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.

  https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media

• app store for Windows does not not om my pc

  my store work stopped windows it opens and then closes it self unexpected

  0116ER wrote:

  my store work stopped windows it opens and then closes it self unexpected

  Hello:

  Please follow this tutorial quickly to solve the problem:

  Difficulty Apps Store and tiles does not work or answers in Windows 8 and 8.1

  Concerning

  Visruth

• Download ADE 2.0 for Windows - does not?

  Hello

  I downloaded Adobe Digital Editions 2.0 for Windows three times since the link to the Adobe Web site. She is 5.6 MB and downloads in seconds (as in the 3-5). I didn't run. I am logged in as administrator.

  Either way, although it should not make a difference, I do this on Teamviewer 7.0.14563 on my dad's computer.

  Any advice?

  Thank you

  I just managed to solve this problem.

  On the application (.exe file):

  Right click, select Properties

  Downstairs, under the 'attributes', I found a security WARNING that prevented her from running. Click on the button and voila.

  Hope that helps.

• The new vesrsion Firefox for Windows does not allow for recording of images from websites. Why is it so?

  When I select a photo from any website by clicking right, popup options. But the option "Save as" does not work.

  Hi tkbabu3,

  Yes it is, I am unable to replicate this, can you provide an example of the Web site where this is happening please?

  Happy to help you otherwise!

• Receiver wireless Xbox for windows does not

  Hello, I bought the receiver wireless for Windows and I made sure that all the drivers are up to date and when I go to the controller and receiver devices are able to be seen and when I try to use the controller for minecraft it doesn't, btw, my OS is windows 7

  Try Xbox support:
  http://support.Xbox.com/en-us/

• Update for windows does not

  can not get windows to work says served is offline

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.