Question of ES1-711 P1UV pilot

Similar Questions

• Model acer ES1-711-P1UV have sauldered ram or can it be upgrade

  I was watching around computers and I found this one that has essentially everything I need. I would like to just upgrade the RAM. so I was wondering if the RAM has been sauldered on or if I could crack it open and replace it with a few more memory.

  Crucial has said that you can replace the memory.

  http://scripts.crucial.com/upgrade/Acer-memory/aspire+ES1/aspire+ES1-711-P1UV-upgrades.html

  I could not find a guide service manual or disassembly as well, I don't know how far to go to get the memory.

  If you need to remove the upper part, the memory can be on the lower side of the motherboard.

• Acer Aspire problem Touchpad ES1-711-C231

  Hi all I recently reinstalled windows 8.1 in my laptop Acer Aspire ES1-711-C231, the touchpad worked fine before, but since the re - install is no more recognized/detected by windows 8.1. I download the device on the support page (Elantech touchpad) driver but still no joy. Help, please. What about Paul

  Hi all, problem solved had not correctly installed the driver intel I/O.

  Paul

• Aspire E17 ES1-711-P3LV keyboard problem

  Turned on my laptop this morning and went to type my password to find that the keyboard doesn't work.

  I connected an external keyboard to study and when I look in it in the settings I see this message

  PS/2 standard keyboard

  Try to uninstall all drivers under bus USB controllers in Device Manager.

  Then, restart the computer. If that does not solve the problem try updating the BIOS.

  In my view, that acer has just published a new BIOS that could solve the problem of keyboard.

  Here is the link to download the BIOS.

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.04_A_A.zip?acerid=635501093269935490&S...

  Use the kudos appreciate the help and mark the answer as a solution. So that others might try the same.

• execution of the RT custom device screw driver

  Hi all

  I'm building a custom device in which I expect a user input. (user provides entries on the home page of the custom device).

  Once the entry is expected on this basis I read the file-specific data and creating channels and article.

  Previously creating channels and article I in the initailiazation code.  But now that I'm waiting for user input I can't create these channels during initialization (reason is before getting the input channels will be created which I don't want. My creation of channel depends on the intervention of the user).

  If this logic of formation of channel I now write in pilot RT VI with my main logic of the reading and writing of the channels. For this I just want to know what exactly is the RT pilot VI begins its execution?

  If the RT Vi driver starts to run after adding the deivce custom veristand and after giving the user input and then my purpose will be resolved.

  I hope I explained my question correctly.

  The pilot begins after the definition of the system is deployed.  I don't think you can add strings in VI driver.  Nor do I think that you want, because you won't have an interface for them in the system definition.  Without a channel interface, i.e. mapping, how do you get data in and out of them?  I think your plan to create channels based on user input and data configuration are fine.  I suggest that you implement in the homepage or pages on the main page.

  -Steve K

• ATI Radeon HD 2600 Xt Ver.8.850.0.0 19/04/2011 update MS allows him to work on my Epson Perfection 1650 scanner. Where can I get an update of the driver?

  Upgrade the MS system does not allow the scanner to function and it is question.

  Epson produce pilots for their scanners - try their website.  It will be hard to help you more as you do tell us not even what operating system you use.

• Diference between 2 laptops?

  Differnce between 2 laptops?  Acer Aspire 17.3 "LED, processor Intel Quad-Core, 8 GB RAM, 1 TB portable drive HARD Windows 8.1 and

  Acer Aspire E 17 E5-771-74E7 17.3 inch laptop (silver iron) HD?

  Aspire ES1-711-P14W: Intel Pentium N3540 - 2.16 GHz - quad core (a small processor).

  Aspire E5-771-74E7: Intel Core i7-5500U - 2.40 GHz - dual core.

  If you look at the two sheets, you will see the price difference (161 against 393). I recommend the Aspire E5 model.

• Touchpad does not work after update BIOS 1.08

  I have an Acer Aspire ES1-711 with 10 windows and when I updated the BIOS to 1.08 the touchpad has become upresponsive after the restart. They keyboard work suddenly quit that I wrote this, I tired to disable and re-enable the touchpad and that caused the keyboard to stop working. This computer might as well be a desktop computer now because you have to use a wireless keyboard and mouse for use... Why must Acer always have a faulty BIOS updates?

  Solved it by installing the IO series Drivers, driver Intel CITY and sideband fabric device driver.

• Acer laptop computer unknown device

  Hello

  I recently bought Acer aspire ES1 - 711 g.

  I encountered a problem with the drivers, in my device manager it is an 'unknown device' with these identifiers:

  1 IUSB3\ROOT_HUB30 & VID_8086 & PID_0F35 & REV_000E & SID_093A1025

  2 IUSB3\ROOT_HUB30 & VID_8086 & PID_0F35 & REV_000E

  3 IUSB3\ROOT_HUB30 & VID_8086 & PID_0F35

  I should also add that my usb ports do not work, so these 2 things may be related. I tried to install _USB_3.0_eXtensible_Host_Controller_Driver Intel (R) but I received a message that I do not meet the requiremens of the minimum configuration to install it.

  Thanks in advance

  Windows 8.1?

  AFAIK, you don't need to install drivers for Intel USB3.0 8.x on windows

  Please check if a USB3.0 driver is installed and uninstall.

  also in Device Manager, right-click on the USB3.0 with the yellow exclamation point and choose uninstall and then reboot.

• Unstable USB connection in Windows 8

  When I connect my Z2 to my WIndows laptop, 8 via the USB cable, the connection is unstable. The laptop recognizes the phone and shows as external hard drive in Windows Explorer, but when I open the drive it does not. Then after awhile, it opens a new window of Windows Explorer with the player in the phone, but still when I can't use it.

  I checked that I have the latest version of the driver. And on my desktop PC with Windows 7 I have no problem.

  Hope someone can tell me how to solve this problem.

  Sounds like your laptop has a question of signing of the pilots or the usb port is at fault

• Precision turn 5810, MDT, Windows 7: storage drivers (IASTORA. (SYS)

  I was the deployment of windows 7 for some time without problem with MDT.  I'm generally with problems of storage driver, but this machine has left me speechless.

  After you have successfully booted windows PE PXE environment and loading of the image on the disk, I keep getting hit with the 'Windows couldn't start, IASTORA. SYS, 0xc0000098, necessary to the file missing or corrupt"error on the first restart.   - So it seems that the wrong storage driver load.

  I did the following:

  I realized the machine precision changed name 'T5810' in ' tour 5810' (so my profile of driver selection is correct).

  Pilot selection profile is the CAB 5810 until files loaded from the serial number - the page I tried to scale older drivers back thinking that maybe a bad older copy charge.  I think that I'm loading v4.3

  I injected drivers into the WIM using DISM just in case. (including the Samsung NMVe drivers)

  I tried to use windows fix - it does not find the question... also responsible pilots he no useful result.

  Drivers (I think) are drivers intel with Plug - and - Play ID VEN 8086 DEV 8 62

  -J' checked this because I can load windows 7 using recovery DVD and there I saw the storage drivers loaded...

  For all the foregoing, I cycled between emulation ATA SATA, ACHI, RAID

  BIOS looks good I think... Secure boot is disabled, the legacy options on... Nothing to jump out of me

  He leads me Ben Ali...

  Seems to be in the intel family of adpater scsi "iaAHCI v4.3.0.1198.

  Hop this help someone else on the research

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• Acer aspire ES1-111 questions

  Hi all

  I decided to enroll in this community to get some tips and reviews the problems I am experiencing with this laptop. I own an Acer Aspire ES1-111 I bought a week ago.

  Since its first configuration, I noticed problems using it with windows 8.1 (its native operating system). For example, touchpad or keyboard not working not properly and, especially, shutdown problems. In this case specific I could never stop the device correctly, because he remained with the power indicator which continued into 'works' although it seems that the system is freezed was arrested. However, in order to really stop I had to press the power button / stop.

  First of all, I decided to reset the system with built-in software eRecovery but problems remain.

  Secondly, I decided to do a clean install of the operating system and I tried the two Windows 8 and Windows 8.1. In both cases, installation process complete without problems, but when you try to install all the drivers, I experienced freezes and once again the shutdown problems. I followed an order to install drivers (Chipset first, only VGA, etc), but in most cases, I had problems of supra. I also tried to disable "Fast start (recommended) turn" without success. 

  But now comes the strange part.

  I finally decided to give it a try for Windows 7 and, to my surprise, everything works fine! I was able to install the drivers correctly and to stop or restart my laptop without a problem. Now I use Windows 7, but, as it is under warranty, I would ask you what you think of this questions.

  I find it quite strange that a laptop does not properly with its native operating system but it is very good with an older operating system! Do you think I should send to Acer support or ask to change it (although, I don't know if I'm still able to pursue this second option).

  Thanks for your attention!

  MIC

  I think I found the reason why I was unable to run Windows 8.1 smoothly after a new installation. I tried to install it during the configuration of the Bios in LEGACY mode, which is good for the BONES before Windows 8 (like Windows 7, as it was working perfectly) but not for Windows 8/8.1 as it probably some issue when install drivers etc.

  So I decided to reset the Bios original UEFI mode. It was the right decision. Not only touchpad was recognized well when loading the USB bootable (expecially since the Touchpad has been on "Advanced", which in legacy mode, would not work), but also because, when the operating system installation process has been completed, I was able to install all the drivers hardware properly and stop/restart of operations fully worked without problems / freezes and so on.

  Hope this information is useful for other users.

• Question about the balloon pilot

  Hello

  I have a question about the balloon pilot in ESX/ESXi 4.x. When the pilot is "inflated" the reason is to reveal to the ESX host memory of comments in fact is not used and that memory could be recovered by the host. However, the driver must be loaded all the time for this memory to be used by the host, as in giving him another VM?

  Or is it just inflate and deflate so and there is no need to stay charged?

  Once that memory has been retrieved the pilot deflates on its own.

• Question on GPIB command "FETCH: WQUALITY:PILOT ' on 8960

  I'm a little confused about this command:

  http://Wireless.Agilent.com/rfcomms/refdocs/cdma2k/cdma2000_hpib_fetch_wquality.php#FETCWQUCDPPIL

  The description of its return value is as below:

  Range:

  I channel or Q: 0 = I, 1 = Q; 9.91 E + 37
  Walsh code: 0-15; 9.91 E + 37
  Propagation factor: 2, 4, 8, 16; 9.91 E + 37
  Code domain power (spreading factor 16)
  Code domain power (sum of power field measures to reverse additional channels to higher rates of spreading factor 16 code) Total: 0.0 to-40.0; 9.91 E + 37
  Total Code domain power Relative to the pilot reverses (compared to the total reverse channel driver): 07:45. 9.91 E + 37

  I got 6 sepearated by comma here:

  + 0.00000000E + 000, 000 + 0.00000000E, + 1.60000000E + 001, - 5.33195600E + 000 -, 5.33195600E + 000, + 0.00000000E + 000

  I'm not sure that they are only the values of Code Domain Power or already containing the code of walsh and propagation factor.

  I would get the Walsh code andspread factor from here.  Could someone give me an idea? Or should I use some other commands to do?

  Thank you

  + Kunsheng

  Sorry... I guess I found the problem.

  Thanks for the attention,

  + Kunsheng