Question of highlighter in Reader

In the reader the highlighter will highlight the entire sentence or more when I want to just highlight a few words, it's really annoying. It does not recognize that it has highlighted a whole bunch of words because it does not give me the option of removing the nail in excess. Is there a way to stop this?

Thank you!

In the reader the highlighter will highlight the entire sentence or more when I want to just highlight a few words, it's really annoying. It does not recognize that it has highlighted a whole bunch of words because it does not give me the option of removing the nail in excess. Is there a way to stop this?

Thank you!

Hello

I don't see the behavior you described.

You can uninstall/reinstall the app drive.

Windows player: Frequently asked questions

Concerning

Tags: Windows

Similar Questions

  • Adobe acrobat reader dc - question to highlight

    When I highlight text in my pdf it says only a few words or even half of the words. How can I fix it? What is the file, or a problem with the program? I download the files for a web site, some of the files I have to highlight the great, but the new experience this problem. If the file is, how can it be corrected? (since I do not create the file)

    SEE the image below *.

    Thank you ~.

    Post edited by: Seth Silver

    Hello

    We are also facing the same experience with this file. As this document is created with in different applications (not supported), for which you can check with the properties of the document.

    It seems to be the specific problem of document. Please refer to this article as well:- policy support for PDFs created by Non-Adobe - Support Knowledgebase applications

    Kind regards

    Christian

  • Equium A100: Question on SD card reader driver

    Hello

    I don't seem to have all the drivers instaled on my Equium A100 to the SD card reader.
    Can anyone help?

    You use your own installation of operating system? If so, please visit the Toshiba support under http://eu.computers.toshiba-europe.com page and you will find everything you need.

    Any other use of way made recovery DVDs and install OS. After this all hardware components will be properly configured and ready to use.

    Bye and good luck!

  • Questions about serial port read and write at the same time

    Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

    (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

    (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

    In addition anyway is to move the cursor to the latest data from the indicator

    (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

    (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

    Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

    su_a,

    (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

    (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

    Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

    (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

    (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

    The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

    Lynn

  • Monitor question: is constant ripple read something difficult - if this isn't a problem with my graphics card, what else could he be >

    It is difficult to describe. I run XP and later that yesterday to fuel my system, I noticed that the monitor was something different for the first time - the perifrial on my hp2011x monitor field had developed these mirco-wave that makes viewing anything a bit difficult. Thinking that it was temporary, I just moved everything I was working on the center of the screen - which remained essentially stable. After having finished up last night, I turned off.

    Today, however, it's another story. Now, the whole screen was made in such a way that everything is now visually corrugated - which seems that ripples are moving up and down in a horizontal jet across the entire screen. And this annoying effect is much more important, making it difficult for the eye to read anything for a long time.

    What could be the problem here?
    Thinking it might be a problem of monitor, I borrowed a friends monitor - exactly like mine, but the effect continues.
    If not, a sign that the graphics card is out, what else could be the problem?

    Thanks for your help.

    Hello

    You think that this problem could be related to the graphics card.

    Method 1: You can see the steps mentioned in the article below

    Resources for troubleshooting problems in Windows XP
    http://support.Microsoft.com/kb/307960

    Method 2: Start your computer in VGA mode, then check if the display problem persists. To do this, follow the steps mentioned in the link below

    Activate the Mode of VGA (Video Graphics Array)
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_overview.mspx?mfr=true

    If the problem persists, you can communicate with the computer or the adpater manufacturer to address this display problem.

  • New Question / / video rotation for reading

    New Question / / I solved 2 problems, I have a remaining. I am in the photo gallery of widows and

    I play a video sent from my I phone. The image quality is excellent, the sound is great. My problem

    is that the video must be turned right to good veiwing. I have no problem turning always moroccoin

    Gallery of photos, but you can not turn the video clip. What can I do?

    Thanks in advance.

    Callbackhunter Maker can turn a video clip if the clip is compatible:

    Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
    http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

  • Dell XPS 8700 Windows 10 questions with SD card reader

    Hi, I bought a new Dell XPS 8700 three months ago.  It comes with Windows 8, even if I asked for preinstalled Win10.  The Win10 upgrade process was fairly straightforward.  However so far three times the SD card reader stopped working.  I fix it by reinstalling the drivers.  Its not working again and my USB stopped working also.  Is there a background process that interferes with USB / SD card drivers?  Anyone else noticed this behavior.

    Rgds Frank

    You can try this:

    Go into Device Manager, and then double-click the entry for your SD card reader. Assuming that he has one, click on the power management tab, and uncheck the box 'allow the PC turns off... ». Now, do the same thing in Manager of devices for all your USB root hubs.

    Then go to the options screen to win 10 powers, click on advanced settings and turn off hybrid sleep. Reboot and see if that helps.

  • Question: what does actually read?

    When I test for reading of 100%, what he actually read in IO monitor, because it is a camera there nothing else on the virtual machine, then only the operating system. So I wonder, that it reads and it come from the cache or not?

    He reads random blocks of sound VMDK - the vast majority of these blocks can be full of zeroes, but it doesn't matter - reading must always be completed.

    The data could come from the cache in your table.  Note that VMware does not make all read or write caching within the hypervisor and the IO parser device shut down its own internal OS caching.  No cache effect would come from your table.

  • Question about the RAF read byte array, method

    Hello

    I use file access random byte array read method to read a file. I will print each line, when printing to the last line, it is added with some null characters.

    Can you please suggest how to remove null characters in the last line?

    I use file access random byte array read method to read a file. I will print each line, when printing to the last line, it is added with some null characters.

    No, you're ignoring the read count returned by the method and the treatment of the whole buffer.

  • Question: Mask Highlighted instead of the layer.

    I have Photoshop CS4. He has recently developed a flaw: when you click on a layer it highlights, if you open the channel option, the channel mask is highlighted instead of the RGB layers. Please notify. Richard Batt.

    Thanks for all your advice. As it happened I loaded a selection of one of the layers, in this specific case, and cleared the problem. In the future, I will apply the solution ctrl/shift/alt. Thanks again. Richard Batt.

  • Tecra T9000: Question about Cd/DVD reader compatibility

    Anyone know what cd/dvd that fits into the Tecra T9000. I bought one where the cd is missing

    See you soon

    Hi aceman

    I suppose that you bought the a drive that is not compatible with your device.
    You should be careful with these products. Not all readers operate on all laptops. There's a different pin assignment that makes compatible players.

    I think that the information that was posted by jmatthews is correct. You have two options: you can google for part numbers or contact the Toshiba ASP in your country and control compatible player of them.

  • fundamental question of write and read.vi series

    I downloaded the basic_serial_write_and_read.vi so that I can learn how to make my VI communicate through series.  Why the example diagram shows the resource name VISA, baud rate, parity, etc. as small rectangles, but when I go to create my own vi and the attempt to put what I think, it's the same controls down, they appear as squares of normal sizes?  I have chosen the wrong controls?  I do not know how to attach a file, or I will show you my vi.

    Tron

    What you call "normal sizes squares" is called the display icon and for those of us who use LabVIEW for awhile, there is nothing normal in their subject. You can right click on any of these and check/uncheck the "view as an icon. To place all the controls/indicators on the scheme in the form of smaller objects, go to tools > Options > block and uncheck "terminals in front Place as icons.

    PS why you download this example? It is part of the examples provided with LabVIEW.

  • A few questions about VMware Flash Read Cache (vFRC)

    Hello

    1) there is a way to simulate a VMFS datastore as SSD device. See the instructions in the following link:

    http://tomverhaeg.nl/VMware-ESXi/VMware-ESXi-tag-a-device-as-local-and-SSD/

    1 a) can we fake a NFS datastore as a SSD device?

    1 (b) partitions on the SSD device must be empty in order for the vFRC to work.

    There are two scenarios here: empty the lun (with no VMFS file system) and VMFS LUNS (with no data). Both scenarios would work for vFRC?

    (2) a device SSD shareable by multiple ESXi hosts?

    (3) several flash pools can be created for each host ESXi? If so, what is the maximum number of pools of flash can be created by ESXi host?

    (4) a device SSD can be used as a local drive?

    1 a) can we fake a NFS datastore as a SSD device?

    >> N°

    1 (b) partitions on the SSD device must be empty in order for the vFRC to work.

    There are two scenarios here: empty the lun (with no VMFS file system) and VMFS LUNS (with no data). Both scenarios would work for vFRC?

    > empty lun with no partitions is necessary... Partitioned VMFS LUNs cannot be used because VFRC works with VFFS file system

    (2) a device SSD shareable by multiple ESXi hosts?

    > not in a context vFRC, normal on SSD lun VMFS datastore can be shared and used for features such as "swap for ssd.

    (3) several flash pools can be created for each host ESXi? If so, what is the maximum number of pools of flash can be created by ESXi host?

    > No, there may be only one pool that will be shared for all VMDK to a permit for the use of vFRC. but also exchange for SSD if configured.

    (4) a device SSD can be used as a local drive?

    > claiming remote as local is possible. but not recommended and performance improvement is not guaranteed in this case with vFRC...

  • HP OfficeJet 7612: Scanning through questions flat

    Good day to all,

    I am a technician to the printer of the client who has been recently bought and installed. Insofar as the drivers and Setup, everything was a success and the customer, but also the other members of the staff were all able to print and scan. Analysis via the touchscreen interface was successful as well as scanning HP desktop utility.

    I recently received a call from the client yesterday, indicating problems when you try to scan A3 paper through the plateau. The document analysis but for some reason, he will be absent from the parts of the original document. It will not analyze the full length and width of the document. What happens when analysis via the touch screen interface; "Scan to PC".  has started to solve problems using my MacBook Pro (no one was using a desktop PC and using my camera allowed me to be the printer as well as not disturb the customer to do its job).

    When I did a scan on the A3 document via my Macbook, he did the samething. So I expanded (if I remember correctly) this 'more details' button that allowed me to choose the size of the scanning, which then allowed the analysis complete of the A3. I went to the Office of customer and analyzed through the utility that has given a proper analysis of the document. I then went back to the interface touchscreen, to digitize and curiously, the scan came out good. There is no option to select the size of the (as far as I've seen) so I didn't pay anything. I made repeated sweeps and they came out all now own. It affected also copy A3 documents because the scan took the whole docment. I made a copy and he now printed the entire document successfully.

    For me, it was a little confusing because all of a sudden, it's working fine now and I know that I did nothing. So when troubleshooting another question, there, I took the officer's cell phone to test. I decided to test the scanning on the laptop as well as with the A3 document via the touch screen, and the same problem occurred. The scan using the HP utility on the laptop produces a correct analysis. Did the scan via the touch screen, and the scan came out good.

    So what I did to get a document format letter to analyze the cause I have a theory that I wanted to test. Analysis of the doc size letter, via Scan to PC on the printer , product, if you want, an A3 size scan. The digitized document correctly letter size, but there was like a white around the document border, creating for the missing part of an A3 size document. I scan on the laptop via the HP utility and selected the letter size, carried out the analysis and it came out good. Going back to the printer to use the scan to PC has produced a correct analysis of a PDF letter size. I then put in the A3 and did the Scan to PC again and it has not produced an appropriate analysis in question. That the part of the letter of the A3 document was scanned.

    Conclusion:

    Analysis via the tools on the PC, gives a successful analysis. Whereas, the scan to pc via the interface on screen touchscreen printer gives the question. If a person did a scan of the letter, and then a second person scan an A3, the printer scans only the part of the letter of A3 paper. If someone did a scan of the letter after a previous A3 scan, the paper will be scanned but the extra part of the A3, will be seen as a huge white border.

    For me as a technician speaking and seeing that this issue is irritating (shocking but always irritating) and much more for those who use the printer to scan; so you can imagine the mindset they are whenever they try to do their analysis and deal with this problem.

    I overlooked anything? Is there something that can be done about it? Thank you :-)

    Spoiler (Highlight to read)

     
     

    Hello

    Thank you for using the HP Forums.

    You are absolutely right, the "Scan to Computer" takes the setting of the last known software (utility) HP scan setting.

    No work around known but this behavior is on most HP printers.

    Thank you.

  • Two part question about multicam sync and placement

    Hello.  I am a newbie to FCP, and I have a few questions.

    1. I have two camera angles and I was wondering if I can sync the audio manually (to exactly match the Visual part), because the automatic method using FCP is an a little off.

    2. question 2 - when I read the camera angles in the window, they are placed vertically.  Is there a way I can place them horizontally rather than vertically?  And a camera angle may be greater in size than the other, instead of being 50-50, it can be 70/30, for example?

    Thank you for your help.

    Is there a quick and easy way to do this?  Thank you.

Maybe you are looking for

  • I can't access the contents of Facebook on my Macbook Air.

    I can access the Facebook site, but there is no content available. The page is not filled. It's just empty! Yesterday Facebook has been for a while, and since she is I can't access the content on my laptop. It is available on my iPad and iPhone.

  • How to uninstall an add-on that does not appear on my list?

    When I go on my Facebook page, part of it has a message that maybe reading "ads go to save" a hundred times on the page. If I click on a photo or something, "ads browse for save" will reappear, as long as the window is open, it is almost impossible t

  • Stuff of Yahoo do not work because I upgraded to 9 FF; I use Windows 7.

    I have a Dell Inspiron laptop, running Windows 7 (fully updated). Since the upgrade to 9 FF, slideshows of Yahoo will not work. They work fine when I close FF and IE (I hate to do, as a matter of principle if nothing else). I don't need an answer, bu

  • Need French drivers for Windows XP Home on Satellite L40 - 12 X (PSL40E)

    Hello I need the drivers for Windows XP on Satellite L40-12 X (PSL40E) model.Can someone help me please?Thank you!!!

  • printing preferences

    When printing, windows sends my request to ONENOTE and I reiterated my request for printing preferences. My computer used to send requests to the printer directly to my HP laserjet 1018. Now it sends queries to laserjet and then to onenote 2007 progr