Question of impression black Officejet 4620

Similar Questions

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• OfficeJet 4620 - will be not printed black - HELP!

  I have an Officejet 4620 and the printer doesn't print black ink.  Other colors print fine.  After spending $ 65, I've replaced the ink cartridges, and it would not print!

  I found the link to ""printer prints a blank Page or print no black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series " and followed all the instructions, TWICE, if not three times! "

  I also cleaned the printhead several times, two rounds each, and again, it will not be printed.  What to do is print the calibration reports that continue to eat my ink!   Printing reports colored pieces, but nothing in BLACK!

  This seems to be a very common problem with these printers because I have read several forums that describes the same thing, and HP does not seem a good solution or offer of difficulty or the problem.  I noticed most positions with this question end up making a private offline message.

  Before I wonder, the printer is no longer under warranty and I live in the United States.  PLEASE HELP ME!

  Hi @VetteGuy,

  Welcome to the HP Forums!

  As you have provided all the relevant information, I need to give a hand, I'll go and send you a private message to discuss the next step from here. If you are unsure how to check your messages on the forum this post, has instructions

• OfficeJet 4620: No black ink

  I have a HP Officejet 4620 ink empty simply stop working. I went through all the downloads, troubleshooting and called customer service. Told me the reason why my black ink wouldn't print was because I haven't used my printer enough, even if the day before it stop working, it works great. I was told that I have would switch to a new printer for the low price of $140 with a 3 year warranty. I've had my printer for 2 years and spent more than $120 for it. I think that spending that much on a printer, it would last 2 years? Maybe it's the lifecycle of HP printers? Im very disappointed with HP on this issue. I was told someone else contacted me and have not heard of anyone yet.

  I just got a phone call from HP and they told me they would me shipping a printer reconditioned to replace mine. I hope it works, thanks for the help

• HP Officejet 4620: HP Officejet 4620 - won't print black

  Just replaced the cartridges in our Officejet 4620. All the colors are working well except black. I can't even print a document, if the text is black. Any suggestions? New genuine cartridges have been used.

  I ended up finding support chat live just after the announcement. New printer on its way.

• Officejet 4620 fax question

  I want to disable the fax from my hp officejet 4620.  How do I do that?

  Sorry, but you will not be able to disable fax on the printer. This is when used. That comes with the printer, I'm sorry.

• HP Officejet 4620: HP Officejet 4620 only ink red print documents computer

  Hello

  I'm connected wireless to my printer HP Officejet 4620. I use the XP operating system (I know very dated) I am trying to print Word documents and they are just an impression in red ink. When I try to run "Clean printhead" function black ink prints fine through the printer. Can someone help me or explain the reasons for which the documents are only printing red ink through my computer?

  Thank you for your time,

  Steph

  Hey @StephyB,

  Welcome to the Forums of HP Support!

  I understand that e-all-in-one Officejet 4620 prints in red when you print from Word on your Windows XP computer. I can help you with that.

  Probably what is happening is there is a font setting that has been changed in Word. If you are unable to find such a context, then the following can be done:

  1. Close any programs you have open.
  2. If the printer is connected via a USB cable, remove it.
  3. Click on start, control panel and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. Uninstall the drivers and the software associated with the printer.
  8. Download the latest drivers by clicking on this link.

  Please let me know if this allows you to print in black. If so, please click on accept solution. If you appreciate my help, please post it by clicking the thumbs up icon. The two icons are below this post.

• HP officejet 4620 printing problem

  I use a HP Officejet 4620. The software is installed on a PC using Vista. I can print to it from my Ipad, but not one of my desktops. Help, please!

  Hey accents.

  I see that you have an impression of question from your Vista PC for your Officejet 4620.  How the printer is connected to the PC?  If network, then what was the last time your electric network configuration has been cycled?

  Follow these steps to reset your printer HP, your router and your computer.

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• OfficeJet 4620: How to cut and copy on HP Officejet 4620

  I am trying to reduce a document to 60% and then copy it.  Because I can not find a guide for Officejet 4620, can someone please tell me how to do?

  Hello
  The printer front click on copy.
  Click the key button to access the setting of copy menu.
  Select reduce/enlarge, and then select custom, set it as 60% and press OK.
  Click the back button once, and then click Start, black or color copy.

  Kind regards
  Shlomi

• change a specific color fax setting in HP officejet 4620

  Is it possible to set up a HP officejet 4620 fax in black only?  There are too many steps by sending a fax.  It is the first HP all-in-one that asks you if you want to fax in black or color.  I bought this machine to be used in the Office of the Director of our office.  She likes not all choices of fax on.  If we can set the machine to fax in black only without the extra step, it would be a great help.

  Hello Candlmc-

  There is unfortunately no way to do it from the front panel. This option is built into the firmware of the printer. Looks like you will need to choose 'black' or 'color '.

• HP Officejet 4620: hpeprint used to work and now does not work

  I've registered to use hpeprint for a number of years and it has worked very well, although I don't use it very often. I had the opportunity to use it today and it doesn't seem to work. The printer is wireless and is great for everything else is not a local problem for me. I received an email from HP indicating that the print job has been received in too. Still not printing.

  Thank you very much for your help!

  PS Subsequent investigations said that "I have not all registered devices! Then when I put my claim code in the to add it again, the message says:

  "The request window that has already expired. Click on "what is a claim code?" below for instructions on how to print the fact sheet Web Services for re - activate the code request for 48 hours. »

  that I don't really understand! Sorry for being a thicko!

  Hey @JimRobinBSc,

  Welcome to the Forums of HP Support!

  I see that you have some problems with ePrint on your Officejet 4620 e-all-in-one printer. I can help you with that.

  First, a code of request is a way for HP connected connect a printer to an account. It has no use outside. That said, if the printer does not appear in the devices on the connected HP, this means that we connect the printer again. To do:

  1. On the printer, click the web services button that looks like a tablet with a phone beside her.
  2. If you see an email address click settings, scroll to remove Web Services and press on this subject to be deleted. When finished, click the web services button again.
  3. Press Setup and Yes. The printer should print a new claim code.
  4. Enter the claim code in the place under the devices tab which requires the claim code.

  Please let me know if this allows you to use ePrint or if you have any other questions. If not, have a great week!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• Print double-sided for Officejet 4620 function

  I just installed my Officejet 4620.

  However, I can't print duplex function in the configuration of printing.  I understand that I have to manually turn the paper as my previous model 4500.  Someone knows the solution?

  I've referenced the manual of your printer. Possibility of manual 2-sided printing is not available with in the printer preferences.  (Where you go into the control panel and set the preferences for the printer from there) But the application your impression of like MS Word for example, you can go to file>print> look under settings and see if there is the option "Manually print on both sides" . Alternatively, you can check Excel and Adobe too. Here is the link for your printer manual http://h10032.www1.hp.com/ctg/Manual/c03251656.pdf

• OfficeJet 4620: Officejet 4620 2 colorful money of the tension springs located behind the printer cartridges

  I really need help.  I need a picture of the 2 springs of voltage silver located behind the printers in the printer cartridges.  I followed most of the instructions to clean the print heads available on this forum, but has failed to take a picture of them so I do not know where to install the.  I would really appreciate a photo.  Help.

  

  PORF kindly sent a picture to me and I was able to go back to the printer.  I took a photo to someone else who failed to take a picture while following the instructions on the following post: http://h30434.www3.hp.com/t5/Inkjet-Printing/My-Officejet-4620-will-not-print-the-black-ink/td-p/2235905

• Driver Officejet 4620 Win Server 2003 32 bits

  I want to install the Officejet 4620 in my network with a Win 2003 (32 bit) server, is there a driver, I can use?

  Hello

  I see that you have a question about a certain driver for Win Server 2003. Unfortunately, there is not a driver available for it, but you can install an alternate driver such as the 990 c driver.

  You can follow this thread made Shane and install the 990 c driver.