QUESTION OF INSTALLATION REGARDING LEGALITY

Is it legal for me to install my 64-bit Windows 7 HP, which was installed on my desktop PC on my laptop?  I replaced with 64-bit Windows 7 HP on my desk with the upgrade to Windows 7 Professional 64 - bit.  Now I have my 64-bit Vista on my laptop that I would like to replace with the Windows 7 HP, which was installed on my desktop - is this ok?... because it is no longer installed on any PC?

Thank you for any response.

Karl

Karl-

I would only buy a major retailer so if in case of doubt please post back the link.

Tags: Windows

Similar Questions

  • Newbie - Question of Installation (before you begin)...

    Good, first of all the question as I embark on the virtual path (or the path of virtualization?).  Here's the situation...

    I have two Dell servers of very high quality (2-processor quad-core, 8 GB RAM, 1.5 TB of storage in RAID 5, double NIC, double P/S backup tape).  They were both purchased before I started and are total overkill for the needs of the Department.  I also have 3 old servers and a handful of former workstations that we keep around because they have environments that are required at all times and are running software that would be difficult to get your hands on these days).

    Recently, we purchased a license for the development of the 1-vCenter Server 1 - VI3.   My initial goal is pretty simple (one of the more recent servers convert an ESX Server, hosting of server environment that currently exists on this area as well as several other virtual machines).  But before you start, I came with a few questions.

    First of all, as I just mentioned, I want to take one of the more recent

    servers (which is currently a backup from the Department Server)

    and convert it to a host ESX Server (I've got the correct jargon of hope).  But I want to preserve the environment that are in this box as a VS.  Is there a way to do this?   Can I use the free Converter P2V and temporarily save the virtual server to a SAR unit and load/configure ESX on this server and finally pull on the virtual server of origin of the NAS unit file?  My concern is that I must have loaded somewhere ESX before I can create a VM, which will not work because the process of creating the ESX Server will scan the server I'm trying to keep.  No sense?

    Second question: at the moment, I want to use the 1.5 TB raid configuration that is presently on this box (local storage) to store the virtual machine.  I'm 99% sure this is a SCSI configuration (I am currently off site and impossible to verify).  There are SCSI?  And there at - it no problem just by using local storage to the virtual machine?  Most of the configurations I've seen described online and in books use SAN for their virtual machines.  But the virtual machine I want to create is not "critical" systems  They are important, but if they were down for a day or two, it would not be the end of the world for us.  Finally, I would like to implement the ESX Servers redundant with external storage, but it is where I am at the moment.  Once I showed you the benefits, I will be able to push in this direction.  So for now, I want to use the high-end box that I like the epicenter of my virtual world.

    I read a virtual infrastructure for Dummies, and it was actually excellent.  I was never a fan of the books 'for Dummies', but I did a little research, and the reviews have been very strong, so I gave it a try.  But I'd be open to other suggestions as well in terms of good books for a mid-level administrator.

    Thanks in advance for the help.  I've learned over the years asking a few questions before a change of this magnitude is much better than labour in advance and hoping for the best.

    CareyBroph

    1: Yes, you can use VMware Converter to convert physical machine virtual server vmware server instance and then use the converter to convert from vmware esx server. I would say a good backup and test the server vmware vm before deleting the physical installation.

    Yes, in 2: SCSI is absolutely fine if caught serveris supported by VMware. The reason why most people use SAN or iSCSI is that they need a storage shared for clusters. You may want to consider this, too since you have the licenses required to run VI3 with ESX Server switchis and vCenter "ontop" and you eliminate the single point of failure of a standalone ESX Server would be. But as you said, the amount of the fine with the non-critical systems.

    Kind regards

    Gerrit Lehr

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  • Questions new installation HD SSD for MacBook Pro

    I followed the online instructions how to install the SSD for my MacBook Pro. I then rebooted by Mac in recovery mode and formatted the drive in Mac OS extended (journaled). It was a little bit tricky message sometimes giving such as erasure of disk failures, but eventually it worked. I selected to install the OS on this HD. The image of the OS were first shown on OS X Lion, but my current OS is El Capitan. I just figured that he was installing the original operating system provided with the mac. The installation went well but then we he had finished wen timer back to 1 hour, 46 minutes. He made several times and after 6 hours, I decided to leave and start over. The second time after erasing HD and formatting again the OS that came was El Capitan for installation so I continued. This time, the installation has been completed and at the end says "OS could not be installed on my computer, reboot and try again." On the third attempt has received a similar message from the failed to install ' year error occurred during extraction of the files in the package "Essentials.pkg." " »

    Anyone has any idea why this doesn't work or suggestions please?

    About 2 months ago I reformatted my HD original as installed latest OS El Capitan as the mac has been slow. Does have a report with questions I get on doing the same thing with another HD?

    What model of MacBook Pro?

    Which SSD model?

    You have another Mac?

    Possible causes:

    -Incompatibility of your Mac with this specific SSD. Recently, some users have reported what appears to be these incompatibilities

    -You damaged the cable flex between the drive and the system board.  It is a common problem and causes intermittent problems initially and if it's even worse the Mac will see is even more disk

    -You have an another hardware problem as RAM bad or other component.

    I'd do it

    -Run Apple Hardware Test

    Using Apple Hardware Test - Apple Support

    -Connect an external drive and install OSX on this disc and boot from this facility and see if you have any problems

    -If you have another Mac download a compatible OS x Installer for the Mac App Store and create a USB bootable using device

    http://liondiskmaker.com/

    and install OSX on the SSD.

    This is the Office Mac Pro forum. I asked that your post moved to the appropriate forum.

  • Question LR installation

    I have a setup of multiple hard drive; the primary drive is a c-SSD, with user files located on another drive d-drive with an e-drive as backup on the d drive.  I placed the installation files on the main c drive, however.  My earlier copy of Lightroom and Photoshop has worked on my build of Windows original 10 - then I had to do a clean install of win 10. I downloaded successfully PS but LR comes up with the following error message: "failed to install errors encountered during installation (7) ERROR DW062 cannot locate the folder for the token.  My subscription is paid but I can not install, very frustrating, can anyone help please.

    Hi vincenzo,.

    Please see the link below.

    Errors 'Exit Code 6' and 'exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements.

    Kind regards

    Mohit

  • What are the most common questions asked by your legal teams and compliance?

    What questions or push back, do you most often do deal with your teams of compliance / legal?  This could be associated with use Eloqua, Web site development, development of communication and approval or social media.

    Some suggestions for the management of compliance backflow the specified item was not found.

  • Questions: Re-installation of Photoshop CS3, problem: "a license for this product has stopped working".

    My old computer has Photoshop CS3 (and Illustrator CS3) installed.  The old computer is dead. I did a Time Machine backup from another computer of backup", who had both of these installed applications.  (2 installs is allowed).  I have records of origin for both applications.  My new Mac lacks a DVD player.  So, I downloaded two applications from Adobe.  Photoshop: I launched the installer, & Photoshop CS3 is not installed.  Then I installed the Photoshop.  When Photoshop is launched, I got the dialog box: (((a license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. ()) Adobe fails to phone support for CS3 products.

    How can I get Photoshop CS3 to work?  (And Illustrator CS3)

    Hello

    Please follow error: "License has stopped working". Mac OS

    Hope that helps!

    Kind regards

    Sheena

  • Flex Builder 3 plugin question extracted Installer

    I downloaded the Flex Builder 3 for Windows plugin today and tried to run in. The InstallerAnyWhere has a popup saying "Please select another location to extract the installer to" but anywhere on my system file I select it still maintains the same question. Only option is to cancel the installation at this point. Anyone know when this will be fixed?

    It seems that our corporate firewall corrupts the download. I have access toa version someone downloaded home and that worked correctly.

  • Automating Essbase version 11.1.1.3 Question customer installs?

    Sorry if this isn't the place to post this question, but no one knows if there is another way to install the client components Essbase individually for Essbase-Essbase administration services (EAS) without using the Oracle and snap install tool? I have a client who needs to automate the installation of 600 users and because they have no standard image program they use must to push the software for desktop computers before you begin the installation.

    Using the installation tool required that about 4 GB of software push the client workstations before installing the software and they would have a smaller footprint. I know that SmartView has a thin Setup program, but anyone know of another option other than use of the installation tool provided by Oracle for Essbase and EAS supplement?

    Hello

    Good reading this post for more details on another option for the installation of the excel add-in:- EssBase excel plug-in software component auto-install
    For Regional service, you can still use the web client, so you wouldn't need to install anything on the client computer.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Tecra M2 - question of installation XP driver

    I just rebuilt a Tecra M2 with a new HARD drive after the failure of the original.

    However I do not have the original recovery disk.
    I installed XP on this machine, but it has not at all the drivers, I am unable to connect to the radio or use a USB drive.

    I guess I should do a driver CD that I need to get this back to spec I can run, but anyone know what they are?

    Is there a recovery program, that I can use a list of drivers that I need to install in any order particually there or otherwise?

    Hello

    What's the problem?

    European pilot of Toshiba site provides all of the necessary XP drivers.
    Download all drivers XP Internet, store on the HARD disk, and then install all the drivers step by step as mentioned in the "Installation Instructions" txt file.

    All that s.

  • Question of installation disk hard satellite 4090

    I received a Satellite 4090, but there is no hard drive. Can someone tell me how to adapt it. I don't see anywhere on slot, so I guess that the case should be opened. Also are the same all drives hard toshiba.

    I've seen a lot on ebay, but they don't say what model they are intended.

    Hopeful Alan

    Toshiba Satellite 4030, 4060, 4080, 4090, 4100 series

    1. remove all cables.
    2 lower the cell next door.
    3. the HARD drive compartment on the side front right / laptop
    4. remove the 2 screws of the HDD bay cover and remove the cover.
    5 remove the 1 screw that secures the HARD drive in place.
    6. gently slide the HARD drive out of the compartment.
    7. slide the new hard drive into the hard drive compartment and replace the 1 screws to secure the HARD drive.
    8 replace the Bay covers and 2 step 4 HARD drive screws.
    9. replace all cables.

    Hope this helps, you can also try here for a disk hard http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&highlightOption=15528&PR ODUCT_ID 5685 = & DISC_MODEL = 0 & tab = 1

    It might be better to get an external hard drive possible hard drives only I could find for this model were only 6.4 GB so you will not be able to upgrade to a larger h/d coz your laptop do not recognize, all if someone else might be able to answer this question better than me Good luck

  • Question on "Installation & Activation of Windows Vista"

    Hello
    is it possible to install a NORMAL Version of Vista from a CD from Vista NORMAL and activate it with the OEM key? I hate the facilities that remove all partitions.
    It's kinda funny. The Version of recovery is a data Partition, but if something fails you loose all your data? !! Whereas the joke?

    Unfortunately you cannot use the OEM key with a copy of original since Vista key OEM need an OEM Vista. That means, if you install Vista, type the OEM key, you will get an error message that the key is not valid.

    And with regard to the recovery: the recovery doing anything other than deleting your whole HARD drive and install the operating system as it was shipped to you from the factory, which means that all files will be deleted.
    You must make a backup of your important files if you perform a recovery.

    Welcome them

  • 2nd question of installation SSD

    MSI MS-7525 mother HP Compaq Persario SR5410F-Boston map

    I checked my BIOS settings to see if I have the opportunity to change SATA to AHCI settings for installing a SSD.

    Under Settings Advanced SATA ony a 1 option, turn on or off there is no option for: SATA in the BIOS settings that allow him to be on the RAID, AHCI or IDE.

    Flashing the BIOS is updated to version 5.22 (only update available), I now have this option for one SSD instalation?

    Hello @Larry1946,

    I understand you are trying to install an SSD in your HP Compaq Persario SR5410F. Unfortunately, the HP Compaq Persario SR5410F don't have AHCI capabilities. You can still install the SSD on your system, only it runs in "IDE Émulation" mode, a kind of compatibility mode that replicates the functionality of the old interface ATA "Integrated Drive Electronics". While your SSD will not display its potential performance or be able to take advantage of all the latest features SATA, it will still be able to run on your system.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • Question about Installation

    Hello everyone!

    I use for some time now with the free trial version of 6 months studying LabVIEW.

    Now, my computer has been cut and I want to install LabVIEW on my new computer.

    My Question is:

    Is it possible to use the same serial number that I have or what I need to get a new one?

    I have 3 month free trial remains and I want to use them if it is possible...

    Thanks for your help!

    JO

    You can install it without any problem. I'd done it before

  • New on windows - question about installations of update failed

    I am new to Windows, but recently purchased a netbook with Windows 7. I also installed Norton Internet Security.  I do not use the netbook every day, so every time I restart, I ensure that I update Windows and Norton.  Today, I watched the history of update and discovered that some elements did not install on other occasions. I don't know whether to worry about this or not.  If the elements have failed to install, say, two weeks ago, Windows Update would not try to install them again when I ran the update engine then?  I have received no notification on this topic - I just noticed this by looking at the history of update.

    While some of the elements initially appear in history as 'impossible' later appear as "successful", I can't find two articles among the facilities of 'success'  They are:

    (1) definition update for Windows Defender - KB915597 (. 1.79.702.0) and

    (2) definition update for Windows Defender - KB915597 (1.75.377.0.)

    Since the date where these two updates could not be installed, there are several successful installations of security for Windows upgrades and updates security cumulative for Internet project.

    I am now, I was wondering if the above is not updates of definition for Defender could have been included in the broader future updates.  Or should I still worry that these two items do not have install and try to do it manually?

    Thank you very much for your help!

    If you use Norton 360, please turn off windows Defender. If the Defender and norton are running, your system can know the performance degradation and other problems caused by the conflict of two services providing real-time protection at the same time.

    It is very important to update the virus definitions regularly. Otherwise you will not be protected against the latest threats

    Swede08, Norton 360 provides complete protection. However for a home user, I won't recommend that Norton 360 or other paid antivirus solutions

    You can use Microsoft security essentials. Its free of cost. Its your choice and depends on you and what kind of protection you need

    I hope the above information helps you

    If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Can a genuine windows installation be legally installed on the same computer more than once

    I had the unconscious idea that a person can install windows as much as they want as long it is on the same computer and it has the same material, but it may be a different partition.  So I guess I can legally install MS Windows Vista, 7 or xp as many times as I want as long as it is on the same computer.  Maybe that's how integrators.

    Thank you.

    Hello

    Yes, you can install the same copy of windows on the same computer as many times as you want and activate for any number of times.

Maybe you are looking for

  • Media Player - try to burn a CD and the drive doesn't show as connected

    I bought a new DVD/CD-RW unit, it plays the CD but when I go to Media player and try to burn a CD, the burner does not show as connected? It's weird.

  • System sloww...

    hi Hi friends I have a problem. I am using windows 7 home basic OS. And 4 GB of ram... the problem is that my system is very slow.and I checked the properties.it system indicates that RAM - (932 usable) gb 4... and the system becomes very slow... Alt

  • Zoom on the image Bitmap field

    Good morning to all" I want to zoom in on BitmapField. Is it possible to BB? TNX your tips.

  • I have the hp photosmart c4780 who does not the computer print

    I have a HP Photosmart C4780 that will scan documents, photos and will copy fine, but when I want to print something from my computer it will not print it. It will send things scanned to file appropriate as well fine. I ran diagnostics, reloaded the

  • Problem to open an INDD file in the latest version of InDesign

    Hi and thanks in advance.I can't open an INDD sent by a client, initially, I got this message:He said baisically that "it cannot open the file because it was recorded in a newer version of Adobe InDesign (CS8.0)", so I requested an update of the soft