Question of ' system cannot activate the graphics performance "T400

Similar Questions

• Error: The system cannot find the specified file. (0 x 80070002)) While performing a regular system backup

  Original title: Backup has encountered a problem

  I just tried my regular backup process and I received the following message:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Outlook file. Error: (the system cannot find the specified file. (0 x 80070002))

  This is not the first time that I received - in the past, I have simply ignored.

  I had "worried" and thought I should come to the 'experts' to get advice.

  Any ideas?

  Thank you very much

  Hi Barbra Wagner,

  This problem may occur if you back up a library that contains custom folders that are located under your user profile.

  Could you please let us know about where are you trying to save?

  I suggest you check the steps in the section: resolution of scenario 1 of the following article and check.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281/en-us

  Please answer us on the State of the question to help you further.

• Error: The system cannot find the specified file (0 x 80070002), when you perform the backup of Windows.

  Original title: missing for InputPersonalization file

  I used the Windows 7 backup utility for several years and recently it has begun to generate the following error:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\InputPersonalization file. Error: (the system cannot find the specified file. (0 x 80070002)

  I checked with Windows Explorer and confirmed that this file does not exist in this way. Instead, the file exists in the path under my local account.

  How can I stop this error? In addition to a clean backup, I like to keep the overall system as clean as possible.

  Hi Jeff,

  Thanks for joining us.

  Please visit the following link to resolve this problem:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-AU

  Scenario 1 is similar to the issue that you are facing. However, you can also try the steps outlined in the other scenarios and see if the problem is resolved.

  Please, try the steps and get back to us with the State of the question.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• cannot activate the automatic updates on my laptop.

  original title: cannot activate the automatic updates on my laptop.  Were follwoed instructions Update window without success.  Help!

  Automatic message updates consistent warning box are not on.  Tried several times to move away, but still says that the site has encountered a problem.  Now completely blocked

  Hello

  -Did you change on your computer before the show?
  -Did you have performed the steps described in this article?
  -What Service Pack is installed on your Windows XP computer?
  -Have you tried "fix it" of this article?

  I suggest you to test the issue in a new user account.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to backup (with Vista) - "the system cannot find the specified file. (0 x 80070002) »

  I cant get a backup on my external hard drive through back and Restore Center in Windows Vista.  I receive the Error Message - 'the system cannot find the file specified. (0 x 80070002) "I see my drive and it's working properly."  Backup starts and then typing mistake in the first minute.  I was using another backup program (WD Smartware) successfully in training so far, but had problems with an update. Then, it was suggested that I use the Windows program because it is obviously compatible with my computer.

  Thanks for the help,
  Rachel

  Hi Rachel,

  I suggest to try the steps suggested by Vincenzo Di Russo, from the following link and check if this can help:

  Error message when Vista backup (0 x 80070002)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-message-during-vistas-backup-0x80070002/a17224b0-C53F-4AB2-9286-ddc47c683ae6

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  Let us know if it helps.

• MOM. Implementation - the system cannot find the file specified at startup

  original title: when that I start the computer, this message - MOM. Implementation, Version = 2.0.3463.30896, culture = neutral, PublicKeyToken = 90ba9c70f846762e, or one of its dependencies. The system cannot find the specified file. __

  So my video capabilities do not work well and the system is slower loading pages of web sites.

  Help, please

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Then:

  This error seems to indicate a driver problem ATI Catalyst

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista 32 bit can't install or update ALL drivers. Error message: "the system cannot find the file specified."

  I also have problems with installation or update all drivers. I keep getting the same error message as everyone another (Windows found driver software for your device, but has encountered an error trying to install it.) The system cannot find the specified file. ") I am currently running Windows Vista 32-bit. Did anyone facing this problem? I can't believe that it has not been yet resolved. ?? I tried to install the drivers from a Web site of the manufacturer (canon), update the driver from windows, cd rom and my USB port. Nothing works. I not made any changes to my laptop and I have to download/install updates regularly.  Come to think of it, I think that this has been a problem for a long time that I was not able to install an update on my 8400 M GS of Nvidia G-force several months > it continues just failing. I checked today and the driver needs to be updated... but I can't update any of them. Did someone really treats problems in this Forum? We could really use some help on this issue!

  Hello

  Have you made changes on the computer?

   
  Method 1:
  You try to install the driver to boot, to troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  You can also check the link provided and check:
  You cannot install a device driver by using its installation program for Windows Vista
  http://support.Microsoft.com/kb/927524
   

• When you connect on Vista, get message of the system cannot find the specified file

  the above is displayed. whenever I connect. I can do everything works, that's when I hit print, save appears and the file has been converted to a tiff file.  None of the office products will be printed.  I have the office 7 wiuth Vista 32 OS.  I went throgh HP, but there seems to be a problem in office

  * original title - MOM.implementation, Version = 2.0.3182.4658, Culture = neutral, publickeytoken = 90ba9c70f84672e' or one of its depenencies.  The system cannot find the specified file *.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.