question of the screen

Similar Questions

• Questions from the screen and keyboard on Satellite R830-181

  Hello

  I had exactly the same problem with it;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=280934

  I also explained what is it and how it over time in this topic.

  To sum up; my screen and keyboard do not work in my Toshiba Satellite R830-181, 13.3 '' laptop.

  My questions;
  1. is it a motherboard problem?

  2. as it runs on an external monitor, I guess that the graphics card or processor is fine.
  There is no damage on the screen, so I guess there is a problem with the connection of the power supply to the screen.

  If I buy a new screen I have my doubts it will work.

  I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.

  What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  Same question applies to the keyboard.

  3. If I repair or fix myself, you think it will happen again? Because I think that this could be a faulty laptop computer of a certain series of production since someone else has experienced the same thing with this model.

  can 4 - there be a relationship between the non-functional keyboard and screen?

  5. If this can be resolved with a replacement of the screen, that I need to find a laptop screen Toshiba R830 or I can buy any 13.3-inch screen?

  As far as I know this model is not supported by the company more, so it is quite difficult to find a screen R830.
  It is difficult to find a 13.3-inch screen, anyway, but still, if I can use the screen of another model which would ease my problems.

  I need an idea on that.
  Thanks :)

  Post edited by: Cagri87

  > 1 - is it a motherboard problem?
  Not easy to say: If the external monitor works correctly then this isn't problem chart/motherboard.
  The external USB keyboard works properly, if not motherboard problem too.

  > 2 - because it works on a monitor external I guess graphics card or processor is fine.
  Yes, that's correct.

  > If I buy a new screen I have my doubts it will work.
  I do not recommend to buy the new parts before the defective parts has not been verified.

  > I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.
  Good idea to send it to Toshiba service partner since the guys would be able to control parts and fix it.

  > What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  > Same question goes for the keyboard.

  Don t think someone can tell exactly what's causing this according to me its just a bad luck material can start malfunction happens in every possible branch of industries (TV, computer, smartphone, cars)

  can > 4 - there be a relationship between the non-functional keyboard and screen?
  No, the keyboard is only connected to the motherboard, display is also connected to the motherboard, but there is no connection between the keyboard and the display.

• Satellite U200 - questions on the screen refresh rate

  Satellite U200-148 WINXPHOMESP2
  Card video Mobile Intel (R) Express Chipset Family 945GM
  Amount of video memory 128
  Accelerated Graphics Port - it's inaccessible
  The screen 60 hertz frequency
  Questions
  (1) accelerated Graphics Port - it is enabled if so that it is necessary to make it became accessible.
  (2) the question whether with 60 hertz frequency can be increased up to 75.

  Hello

  I noticed that on some computers laptops Toshiba, the screen refresh rate is fixed on 60 Hz.
  The screen refresh rate is not important on laptop screens.
  Matrix TFT is not such a thing as the refresh rate. It is not blinking.
  TFT as all other LCD screens do not refresh rate setting, only the reaction time.
  Your eyes are sure ;)

  PS: as much as I know AGP port is not available.

• Sound and SoundChannel question when the screen is off

  Platform: AIR 3.8 on Andorid

  Classes: SoundChannel & Sound

  Background: I am writing an application that plays the songs one after another. I'm listening to the SoundChannel instance soundComplete event. When the current song is finished, it will create a new Sound object, the sound will then load a URL and play the next song. It worked fine when the application is activated.

  Question: when the application is reduced or if the screen is off, the next song will not be played. I have to switch him back to the app or turn on the screen, then the next song will be played automatically again. I don't know if it's because the of the SoundChannel object soundComplete event will not fire when the screen is off, or if it's because the Sound object doesn't start loading when the screen is off.

  Resolved by the update to version swf SDK 3.9 and export 11.9

• Question of the screen of the user interface

  Hello guys '

  I draw the screen for my application. This screen has LabelField, BasicEditField and RichEditField.

  You can see on the image which screen I want to draw.

  

  Constant stable position in these fields. I don't know how to scroll through RichTextField.

  If you have an idea, please help me.

  Good day. TNX all

  Take a look at the BlackBerry Developer journal article below.  It shows how to create a custom behavior field you are looking for.

  http://NA.BlackBerry.com/eng/developers/resources/journals/jul_2005/creating_textbox_field.jsp

• Question on the screen LCD, Satellite A500-1F4

  Hello world.

  I intend to buy the new laptop and I saw the specs of the Satellite A500-1 F4 and Satellite L505-13W. I love the 16 "in A500 display but there is one thing is not clear, what do they mean on screen truebright? Compared to L505, he has LED HD display.

  In addition, what is much better video card? NVIDIA GE force or ATI Radeon? The A500 and L505 have the same capacity 1 GB graphics card, the difference of the brand.

  Thank you.

  I have very good experiences with ATI.

• Many lines appear on the screen of Qosmio F10

  Hello

  I have a problem with my Qosmio F10 screen
  I see a lot of lines on the screen. And I have to disable the VGA driver or run the screen by using the options below.

  I plugged the laptop with external LCD display, and the same problem appears!

  That's why am sure it is a problem of VGA card

  What is the solution?
  Should I change the whole motherboard? And I can't part used rather than buy a new one? Because it will cost me a lot! And where I can good.

  Another question, yesterday the screen was simply awesome! I don't know what happened, I just with leaves the laptop that works for about 10 min and when I came back, I found that it works very well. After the reboot, the problem appears again!

  Is it possible that the chip is (half broken) and could be fixed?
  Or should I get the new motherboard?

  Thank you

  Hello

  Unfortunately, it seems that the solution is not good cheap!
  Graphics card chip malfunctions and it seems that the whole motherboard must be replaced! The motherboard is one of the most expensive laptop outside the internal display parts.

  Sometimes the graphics card work poorly due to overheating and high temperature inside the laptop.
  In this case, it s always advisable to clean the cooling modules.
  This can be done easily by using the hose of the vacuum cleaner.
  But please be careful.

  But if this procedure will not improve the graphical situation then the graphics hardware is certainly defective and only replacement could help!

• my monitor has fuzzy LINES running left to right on the screen. How can I fix?

  software problems

  I would update the drivers, firmware or software for your monitor and your video at the same time card.  Also, if you have another monitor, swap them to see if the problem goes away or moves - then we can pretty much reduce the question to the screen and not the video card (and if the updated drivers do not resolve this problem, then it's a hardware problem and you can either take a workshop of computer service repair or simply a replacement of purchase screen.)  Do the same with the video card if you happen to have a spare part that fits.  If this isn't the case, you may need to take the system to a repair facility of computer for the service that it sounds like a hardware problem and not a software problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Split will not calibrate the screen

  I had a HP Split x 2 13 summer try to calibrate the screen for more than 2 days now and still have the same problem, departures from the screen upside down (touch top low clicks) but works completely (all the corners and excellent angles work) after the first parts of calibration of the edges to stop responding when you perform the second calibration its almost impossible due to finish the screen will not click on edges of the screen

  Anyone had this problem before and how you guys solve this problem?

  Hello Luis,.

  Thank you for writing to us, we are happy to help Microsoft Community.

  For the question with the screen upside down, press the Control, Alt and high at the same time.

  For more information about calibrating monitor for the HP device, you can refer to the section "comes a touch close to the touchdown point, not at the point of contact" in the link provided below.

  HP TouchSmart PC - troubleshooting problems of touch screen in Windows 8

  I would ask update you the drivers of graphics from the link provided below. Download and then install the latest drivers for graphics from the link provided below.

  Drivers HP Split 13-m010dx x 2 PC

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

• Question about the parameters of the screen double

  Hello

  I have some problems with my new TV that I want to connect to my laptop. I have a Toshiba Satellite L300D with Windows Vista.
  The problem I have is for the installation of the settings of the TV screen. I want to share the desktop between both screens, and I do the installation as usual with the settings of the screen of the control panel and save my settings. It works fine, but when I change the view between the screens with "FN + F5", all my settings are gone; It is however it was before.

  So my question is, how can I keep my settings for the next time, or, how can I change the "FN + F5' - settings?

  Thank you for a quick and understandable response

  Q:

  Hello

  Until we start the discussion please can you me what settings to record exactly?
  In my opinion, it is not necessary to record anything, when the FN + F5 key combination offers several different settings that you can use.

  By the way: how you have connected your laptop to the TV? Using the S - video cable?

• Taskbar - a question where the option to enlarge the screen on the task bar?

  original title: Task bar question.

  I used to have a box in the right corner of my taskbar which allowed me to "magnify" the screen on my laptop, i.e. 100%, 150%, 200% etc by clicking on it.  He disappeared after an update and I can't get it back.  Any suggestions?  Thank you.

  original title: Task bar question.

  I used to have a box in the right corner of my taskbar which allowed me to "magnify" the screen on my laptop, i.e. 100%, 150%, 200% etc by clicking on it.  He disappeared after an update and I can't get it back.  Any suggestions?  Thank you.

  In addition to the status bar you mentioned, there is another way...

  You have enabled in your Internet Explorer Menu bar?

  If Yes, click on view > text size options or select Zoom (100%). There, you can make the text larger / the screen as you wish.

  If you have no active Menu bar...

  Right-click on an empty space below the address bar > check the menu bar.

• Two screen question: Control Panel appears on the screen 1 but the mouse is on the screen 2 and so I can't access

  I have a Sony Vaio laptop connected to a stand alone monitor. I don't use the laptop screen unless there is a problem and then I had to alternate between the two screens using Fn F7 key.

  A problem has occurred with the rundll32 process (which I'm trying to fix separately) and this led to the PC automatically flicking between screens and then stick with the independent monitor but in low resolution (so I couldn't access the tool bar along the bottom).

  I went to control panel to change the resolution to high, but the question of rundll32 kept close the process.

  This left me with icons on the desktop of the monitor stand alone, a white color on the laptop screen (it is normally black) and the ease of Fn F7 does not (said the service is not available).

  When I click on Control Panel on the screen of stand alone, it opens on the screen of the laptop, but I can't access it because the function of the mouse is on the screen to stand alone.

  Can someone help before I go out drinking?

  Thanks, Temp.

  I seem to have solved the problem. It seems that display order has been reversed and so I just had to move the mouse to the right of the screen to stand alone (I had been pushing against the left hand side) to move on the screen of the laptop. From there on, I played a bit with the display settings in the control panel and, although the issue of the always kept dllrun32 throw me out, seems to be back on the screen of stand-alone only, with the correct resolution and the Fn f7 works again. This means I can put the top back on bottle of vodka, at least until the next issue of dllrun32 arises.

• icon question mark which shows on the screen of the HP 8620

  Today, I see the icon question mark (help?) lights up on the front of my new all-in-one screen.

  First time for this weeks since the first installation and implementation.

  I'm not having any problems with the device.

  What can he say?

  Thank you

  Hey @dennistaphorn ,

  Welcome to the HP Forums!

  I understand that you have questions about the? icon on the front panel of your printer.

  The? appears on the left side of the control panel when you are on the home screen of the printer. It allows to access the Help menu that give information about the printer you and useful guides related to the printer. This button is normal and does not indicate an error on the printer.

  Hope this information helps.

• Questions: Create a new layer / switch between the screen Modes

  I spent the day to reset my workflow and keyboard shortcuts that I have the transition from CS5.5 on CC. A question about the ID:

  1. create a new layer draws up the InDesign menus? In CS5.5, I managed to create a shortcut customized in three programs (PS, I, ID). In cloud creative, no matter how hard I look in InDesign, that I can't find a place in the dialog box shortcuts keyboard to make a shortcut for this command.

  2 in Photoshop and Illustrator, by pressing the F button toggles between screen modes. In InDesign CS5.5, it does the same thing. However, CC does not seem to have this feature. He wants to assign three different shortcuts for Normal, overview and presentation of the screens. Correct, and is it possible to return to a toggle key 'F'?

  Thank you!

  Perhaps scriptable. Ask in the InDesign scripting

• my apple mac shows a symbol of folder with a question mark on the screen and beeps

  My apple imac seems that having frozen with a white screen, a folder symbol flashes on and off the screen, file symbol has an exclamation mark on this subject, the computer has a beep but has now ceased, any idea on what is the problem and how to solve?

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

  Flashing?  Means the computer cannot find a valid boot disk.