question of time timer system (do not reset)

Similar Questions

• I forgot my apple ID sequrity question, several times I tried to reset my sequrity question but there is no display on the window to reset (reset sequrity awnser) .please help me.thanks

  I forgot my apple ID sequrity question, several times I tried to reset my sequrity question but there is no display on the window to reset (reset sequrity awnser) .please help me.thanks

  Hello

  You will need the answers to your security questions.

  Follow the instructions here > If you forgot your Apple ID - Apple Support security questions answered

• Time system RE6500 not defined and, why put a DNS address?

  How to set the time RE6500 system to the current date if it is displayed January 1970?  It is connected to the router on the two frequencies and the release of the expansion works on the two frequencies.

  I set the RE6500 to address 192.168.1.3 static as the router address is 192.168.1.1.  In the RE6500, the default gateway is set to the address of the router 192.168.1.1.  It is necessary to set the DNS address in the RE6500 the router's default gateway?

  Try to use the public DNS servers instead. I have the list google and tommy (I think that he always existed) of public DNS servers below.

  8.8.8.8

  8.8.4.4

  4.2.2.1

  4.2.2.2

• Stop button does not reset LabView?

  Hello

  I did this VI (attached to this message), but whenever I have to use "continuous run", it seems that this gives the wrong result in the façade. However, it gives correct results when I add a random check on the block diagram and delete it immediately (technically speaking, nothing has changed at the blockdiagram) and after that, press 'run continuously.

  If the button "Cancel execution", which I use to stop the system does not reset my system? How to reset the system until I use it?

  In addition, below I watch 4 similar parts, if I use 25 of these parts in the same file, does it take much calculation effort or is it no big deal for LabView (on a basic computer?)

  

  Thanks in advance!

  Just do a simple state machine

• System restore not working anymore. Error message source %SystemRoot%\registration ComPlusStaging destination. The shadow copy of volume set to automatic. System Restore resets several times.

  New Sony Vaio, Windows 7 Professional, Avast AV, PCTools Firewall. Problems on the first day. BSOD (not seen in Windows 98) appearing randomly, large memory dumps without obvious reasons. After about 2 weeks, I found that the system restore did not work which is surprising since MS said that the OS is stable and reliable. Door on this forum and many others via Google and I tried a lot of suggested solutions, but nothing helped.

  System Restore is an important equipment and I don't understand how he can be so easily broken. It seems to be a common place among users of Win 7 judging by the number of posts on the topic, then why has MS has not released a fix to protect the system restore? Silly question I suppose to have no response.

  Please, if the contributors to this excellent forum can help get my status on system restore, I would be really grateful. I spent over a week trying to find a solution without posting here, but did not succeed in my business.

  TIA

  Raymond Griggs

  Gerry

  Trust that the party went well?

  Sony gave the question of restoring the system and told me that the only solution is to go back to them for a return to the delivered status.

  I decided to take your advice earlier and forget it and use a third-party backup system.

  EASEUS Todo Backup just released as a free update. New interface user and services, backed up just my C:\ drive in 15 minutes approximately.

  Worth a visit as is their new version free Partition Manager.

  Thanks for all your help has been invaluable.

  Best for 2011

  Raymond Griggs

• "Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.

  Hello

  I have installed Windows 7 ultimate 64 bit on many brands of laptops, but when I installed it on Inspiron 15R N5110, (core i5 and 4GBRAM). I faced an error at startup of windows 7 after completing the installation.
  NOTE: When the installation finished and restarted my computer, this window shown to me.
  
  
  
  Two options from the two options above I chose, I found myself with the blue screen:
  
  
  Error blue screen said something these ' BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS I don't know what that means and I don't know where is the culprit. I wish I could capture this error screen. However, it is impossible to do because I wasn't the Windows environment. 

  
  

  Even if the error related to BIOS necessary for the update, so how could I update as long as windows has not begun.
  
  
  
  
  
  
  
  
  Is there something that needs to be configured in the BIOS before installing Windows 7 on Dell laptops.
  I'm quite surprised that the previous system was windows 7, but it was Home Premium.
  
  
  The strangest thing is when I tried to start to repair the disk and even disk instillation of Windows to resolve startup problems, I found that this startup repair couldn't fix problems.
  
  
  When I tried to do these steps:
  
  
  1. Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.
     Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER.
     Note By default, the administrator password is blank in Windows XP Home Edition.
  5. By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
  6. Restart the computer.
  When I arrived at "system recovery options, I saw that my system is listed, then I chose then, but I found myself with this ' this"system recovery options"version is not compatible with the version of windows that you are trying to fix." Try to use a different compatible with this version of windows recovery disk, even if I'm sure only that the same disk to install windows I have installed since.
  
  
  NOTE: I do not add RAM or other devices. There is a windows 7 Home premium and I just re installed a windows 7 ultimate 64-bit. I don't really know what the previous windows version 7 is 32 or 64 bit.
  I checked the dell forum and I found ' your computer goto your BIOS F2

  That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7

  hope it will work. »

  But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.

  Hello

  Check the steps suggested by LoneWolf1983 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/stop-BIOS-not-fully-ACPI-compliant/25210db0-5491-4fc8-99c2-ec0361dd8388

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Thank you very much

  I checked this thread, and I found this solves the problem

  I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!

  But as you know that no matter what BIOS are different from others.

  Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3

  NOTE: My problem is when you install a new version of Windows.

  In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.

  If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)

• I have a registration error trying to download a disc. It is said, your operating system Date and time format do not match the expected for PM Fastrack run format.

  Error in saving of the PM FASTrack.
  Impossible to analyze the dayYour operating system Date and time format do not match the expected for PM FASTrack run format. The format should be mm/dd/yyyy hh: mm:. The format is

  It's my complete error message. The time is set in this format on the computer. How should I do?

  Hello Murphy,

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, I understand this format date and time do not match for PM FASTrack run.
  Let me go ahead and help you with the issue.
   
  You did changes to the computer before the show?
   
  I suggest for the link and follow the steps in the article, and check if this can help:
  Change the display of dates, times, currencies, and measures
  http://Windows.Microsoft.com/en-in/Windows7/change-the-display-of-dates-times-currency-and-measurements
   
  Also, check out the support links:
  PM FASTrack support.

  http://www.rmcproject.com/support/PMP/errors/error4.aspx

  http://www.rmcproject.com/support/support-registration2.aspx

  http://www.rmcproject.com/support/PMP/v7/FAQ-4common.aspx

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I can not reset a timer flash AS3?

  I wrote clear following a timer so that it counts form 0 again. The timer is not reset, it will just stop and it save the last count.

  The trace output is: 34900 and I want it to be 0. How to do?

  myTimer.reset ();

  myTimer.removeEventListener (TimerEvent.TIMER, timerListener);

  trace (getTimer ());

  Here is the complete code for my project: (The comment linse are for me, not for you)

  Stop();

  var i: int; i = 0;

  var c:int; c = 0;

  var timer_check:uint = 0;

  var removeCheck:Boolean = true;

  var brand: Number = 0;

  var timerOff:Boolean = false;

  Var list: Array = [];

  timed var: uint = 16;

  for (var p:uint = 1; p < = 44; p ++)

  If you want to add more photos traditionally 44 to the new number of images

  {

  List.push (p);

  }

  Shuffle (List);

  good var: Array = [];  copy

  var test: Array = [];

  Copy (List, Good);

  Copy (List, testing);

  good = good.splice (0.18).  cut the first 18 elements

  var PIC: Array = list.splice (0.9);

  test = testing.slice (0.45)

  Shuffle (testing);

  var myTimer:Timer;  Second: re-arrangeing some nine picturs using 'if' conditions:

  myTimer = new Timer (1000,34);

  myTimer.addEventListener (TimerEvent.TIMER, timerListener);

  function timerListener (e:TimerEvent): void {}

  timed;

  Time.Text = "duration:" + timed.toString ();

  Time.x = 340; Time.y = 7;

  If (timed == 0 & & removeCheck) 16000 getTimer() > 18000

  {

  Timed = 16;

  for (var removeOldPic:uint = 0; removeOldPic < 9; removeOldPic ++)

  {

  This ['p' photo [removeOldPic]] .x plus 5000;

  }

  PEAK = list.splice (0.9);

  c = 0;

  removeCheck = false;

  }

  If (getTimer() > 34000) after completing the timer 34000

  {

  Time.x = 5000;

  PicGraphic.text = "image:" + (picCounter) m:System.NET.SocketAddress.ToString () + "/" + numberOfTestingPictures.toString (); "."

  PicGraphic.x = 280; PicGraphic.y = 7;

  for (var removeNewPic:uint = 0; removeNewPic < 9; removeNewPic ++)

  {

  This ['p' photo [removeNewPic]] .x plus 5000;

  }

  YesYes.x = 465; Nono.x = 165; YesYes.y = 300; Nono.y = 300

  contine remove event listeners *.

  timerOff = true;

  myTimer.reset ();

  myTimer.removeEventListener (TimerEvent.TIMER, timerListener);

  trace (getTimer ());

  }

  While (< 9 c)

  {

  If (c == 0)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 132;

  This ['p' + photo [c]] there = 60;

  }

  If (c == 1)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 312;

  This ['p' + photo [c]] there = 60;

  }

  If (c == 2)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' plus photo [c]] .x is 492;

  This ['p' + photo [c]] there = 60;

  }

  If (c == 3) / / new line

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 132;

  This ['p' plus photo [c]] there is 240;

  }

  If (c is 4)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 312;

  This ['p' plus photo [c]] there is 240;

  }

  If (c == 5)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' plus photo [c]] .x is 492;

  This ['p' plus photo [c]] there is 240;

  }

  If (c == 6) / / new line

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 132;

  This ['p' plus photo [c]] there is 420;

  }

  If (c is 7)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' photo [c]] .x plus 312;

  This ['p' plus photo [c]] there is 420;

  }

  If (c is 8)

  {

  This ['p' photo [c]] .width plus 175;

  This ['p' photo [c]] .height plus 175;

  This ['p' plus photo [c]] .x is 492;

  This ['p' plus photo [c]] there is 420;

  }

  c ++ ;

  }

  }

  myTimer.start ();

  //-----------------------------------end---------------------------------------------

  programming keys

  var picCounter: uint = 0;

  var numberOfTestingPictures: uint = randomRange (30,40);

  yesyes.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  PicGraphic.text = "image:" + (picCounter + 1) m:System.NET.SocketAddress.ToString () + "/" + numberOfTestingPictures.toString (); "." Code is repeated for updating its data

  for (var iyes:uint = 0; agreed < 17; agreed ++)

  {

  If (tests [picCounter] == good [Agreed]) {brand ++ ;}}

  }

  Don't forget to repeat the changes of what follows if "Declaration".

  nono button

  If (picCounter > = numberOfTestingPictures) / / finising the game and appearing the score

  {

  YesYes.x = 5000;

  Nono.x = 5000;

  bar.x = 5000;

  This ['p' test [picCounter]] .x plus 5000;

  stage.removeEventListener (Event.ENTER_FRAME, appearingPic);

  var fine: Number = (mark / (picCounter + 1)) * 100;

  score. Text = "your score is:" + fine.toFixed (2) + '%'; "."

  score.x = 225; score.y = 200;

  XT2 there = 400; playAgain.y = 300;

  PicGraphic.x = 5000;

  }

  picCounter ++;

  }

  var negativeMark:uint = 0;

  nono.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage1);

  function fl_ClickToGoToWebPage1(event:MouseEvent):void

  {

  PicGraphic.text = "image:" + (picCounter + 1) m:System.NET.SocketAddress.ToString () + "/" + numberOfTestingPictures.toString (); "."

  for (var ino:uint = 0; ino ino; < 17 ++)

  {

  If (tests [picCounter]! = good [ino]) {negativeMark ++ ;}}

  }

  If (negativeMark > 16)

  {

  brand ++;

  negativeMark = 0;

  }

  If (picCounter > = numberOfTestingPictures) / / finising the game and appearing the score

  {

  YesYes.x = 5000;

  Nono.x = 5000;

  bar.x = 5000;

  This ['p' test [picCounter]] .x plus 5000;

  stage.removeEventListener (Event.ENTER_FRAME, appearingPic);

  var fine: Number = (mark / (picCounter + 1)) * 100;

  score. Text = "your score is:" + fine.toFixed (2) + '%'; "."

  score.x = 225; score.y = 200;

  XT2 there = 400; playAgain.y = 300;

  PicGraphic.x = 5000;

  }

  picCounter ++;

  }

  stage.addEventListener (Event.ENTER_FRAME, appearingPic);

  function appearingPic (event: Event)

  {

  If (timerOff)

  {

  This ['p' test [picCounter]] .width plus 175;

  This ['p' test [picCounter]] .height plus 175;

  This ['p' test [picCounter]] .x plus 312;

  This ['p' plus test [picCounter]] there is 112;

  for (var tc = 0; tc < testing.length - 1; tc ++)

  {

  If (tc! = picCounter) {this ["p" + test [tc]] .x = 5000 ;}

  }

  }

  }

  XT2.addEventListener (MouseEvent.CLICK, exitbutton2);

  function exitbutton2(event:MouseEvent):void {import flash.system.fscommand; fscommand ("quit");} System.Exit (0) ;}

  playAgain.addEventListener (MouseEvent.CLICK, resetAllTheGame);

  function resetAllTheGame(event:MouseEvent):void

  {

  i = 0;

  c = 0;

  timer_check = 0;

  removeCheck = true;

  brand = 0;

  List.Length = 0;

  Timed = 16;

  Good.Length = 0;

  testing. Length = 0;

  PEAK. Length = 0;

  picCounter = 0;

  gotoAndStop (1);

  }

  ////////////////////////////////////////////////////////////////////////////////////////// ///////////////////

  function randomRange(minNum:Number,_maxNum:Number):Number / / this function generates a random number

  {

  return (Math.floor (Math.random () * (maxNum - minNum + 1)) + minNum);

  }

  function removeDuplicate(arr:Array): void {}

  var i: int;

  var j: int;

  for (i = 0; i < arr.length - 1; i ++) {}

  for (j = i + 1; j < arr.length; j ++) {}

  {If (arr [i] = {arr [j])}

  arr.splice (d, 1);

  }

  }

  }

  }

  function shuffle(array_shuffle:Array) {}

  var p_array_shuffle:int;

  var t_array_shuffle: *;

  var ivar:int;

  for (ivar = array_shuffle.length - 1; ivar > = 0; ivar-) {}

  p_array_shuffle = Math.Floor ((Ivar+1) * Math.Random ());

  t_array_shuffle = array_shuffle [ivar];

  array_shuffle [ivar] = array_shuffle [p_array_shuffle];

  array_shuffle [p_array_shuffle] = t_array_shuffle;

  }

  }

  function copy(copyA:Array,copyB:Array) in two table copy, the source table is first

  {

  for (var copy_counter:uint = 0; copy_counter < copyA.length - 1; copy_counter ++)

  {

  copyB [copy_counter] = [copy_counter] may;

  }

  }

  myTimer.reset ();

  myTimer.removeEventListener (TimerEvent.TIMER, timerListener);

  trace (getTimer ());

  You draw a completely different timer. getTimer() is Mississippi, since the movie started playing and has nothing to do with the myTimer Timer.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  I have an Apple Mac computer (about 2 years) and on many occasions I tried to install Service Pack 3 and every time it does not have enough space whne the system has a large empty space

  Error message when you try to install XP Service Pack 3 on some Intel processor Apple computers, 'more space':

  http://support.Microsoft.com/kb/950716 MS - MVP - Elephant Boy computers - don't panic!

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Satellite L50-B-date/time in the BIOS resets without battery

  Hello friends :-)

  I just bought new laptop Toshiba Satellite L-50-B (Skullcandy). After a few days, I read on the internet if I want to save my battery I have to just take off and works on current alternative. I did it. My battery is fixed by two screws. When my battery is removed, I noticed a problem, my time of BIOS is reset whenever I turn off the laptop. When I put the battery, time is not set to zero.
  I have difficult, maybe it was a CMOS battery? What do you think? I open it and I couldn't find the CMOS battery?

  Another question, why the battery is fixed by two screws? I wondered, maybe she is not intended to be deattached?

  Hello
  did you get anywhere with this? I have the same problem.

• Control the simulation time to align the time system

  Good so maybe it's blindingly obvious or just simply a ridiculous question but here goes:

  I run a dll that I produced from a .mdl file. My goal (among others!) is to get the dynamic response of the exact model of 'real world' calendar (date system). The tuning for the appearance of the control of this model is based on the duration of simulation with produced in simulink and so it is desirable for me to define the duration of the simulation to run when the system.

  The problem I have, if you open the workspace and produce a template control, the simulation shown time is much faster than the time system.

  For example, one iteration of the model takes a fraction of a second. What I imagine happens, it is immediately restart (and progress of a time step). I guess I want the model to wait until it is in harmony with the system time before iterate again.

  Is there a way to solve this problem, and do anyone know if this problem will be resolved in Simulink or Veristand 2009.

  Any information would be appeciated, my trawl of the help files OR have not really answered the questions yet good

  Thank you
  James

  The models are running in sync with the rest of the system. Unless you specify a decimation factor for your different model of 1 for each tick of the primary control loop your model put once, too. The difference between the model and system duration that you see is due to the fact that the model time is based on its time not Delta T compiled, not any of the wall clock time. Every time that the model is Ticktock, it adds its own Delta T to its operation time string.

  The time channel system is based on the Delta T of the primary control loop. Thus, it corresponds with the rate you specified the system to run at. If these Delta Ts are the same, are aligned at the same time. If you want the time to model to match an actual wall clock time, you can adjust the flow of the loop of the primary control loop to match the Delta T, or adjust the factor of the decimation of the model so that it gets only checked once for every N the primary control loop iterations.

• Update time system RT

  Hello.

  I use a PXI 8108 RT with module time real Labwindows/CVI and I want to know if there is a function to update time system RT?

  I haved tried to use SetSystemTime but this function is not supported by Labview RTOS.

  Best regards

  Armand

  Hello Armand.

  Instead of using the SetSystemTime LabWindows/CVI implementation , you must use the Win32 implementation.  To do this, make sure that you have included as the first include file windows.h in your source.

  Let me know if you have any questions.

  NickB

  National Instruments