Question of VCS rehost keys/transfer option

  • Customer SCV was RMA and purchased options reheberges/transferred orig keys. SN to the new replacement.
  • Orig. VCS is still in Production.

Question: Will impact entering the option on the new replacement buttons and put online the original aircraft still in production?

This will not affect anything, keys options that were transferred from the VCS failed the new one does not reference the old device somehow.  The process of transfer/rehost just allows you to get even or like keys options for your replacement that matches the old device you send to Cisco.

You will also need to contact the vendor or whoever the service contracts were purchased through them for having updated to take account of the RAM, so the old serial number may be replaced by a new one, you have received.  This process occurs automatically when a RMA or rehost is finished.

Tags: Cisco Support

Similar Questions

  • BlackBerry smartphones? mark the key / transfer of photographs. BB Torch

    Two questions please.

    Why do the? Mark backwards see the key when entering texts.

    How can I transfer photos from pc to BB torch

    1. upside? I have not seen this question of others.

    Check your Options > languages, is English selected for an input language and your language?

    2. transfer of pictures... There are several ways.

    First question is, you want to transfer your press CARD or in the device memory?

    One method is through support Wifi of the desktop software.

    It is a way to plug your torch to the PC via the USB cable.

    1. go to Options > Media Card
    (some themes or BlackBerrys can call this ' settings > Media Card ")

    2. check the following parameters (if they are that way, then changes according to the following:)
    (a) media card Support: on
    (b) mass storage Mode Support: on
    (c) auto Enable mass storage: Yes

    3. save the settings and exit

  • Database offline: how to configure the primary key storage options?

    I want to model a large database that has its primary keys in their own table space. I don't see primary key storage Options as I do for the index and the properties of the table. JDeveloper supports storage options capture for primary keys? I use JDeveloper 11 g 11.1.1.0.0.

    Published by: flszen on October 17, 2008 13:42

    Hello

    I entered an enhancement request for this

    Thank you very much

    Susan
    http://www.susanduncan.blogspot.com

  • Set up synchronization for the 1st time, never had a recovery key; no option running firefox under Linux

    Never had a recovery key. Firefox running on the Linux desktop, no synchronization option.

    Hello!

    Can clarify you what your question is? You describe a situation, but there doesn't seem to be a problem. If you want to get the key to recovery for more information, you can go to the tab sync in the Options window and select "Key recovery" in the fall of my account in the menu Manager drop-down.

    I would like to know if this is what you are looking for.

  • Satellite R830: Question about power for battery usage options

    Hello world

    I recently bought a R830-182 (detailed configuration below).
    I had to update Windows 7 Home Premium Ultimate because I need to use it on my university network.

    My University gives us an upgrade to windows 7 ultimate edition, but I had to do a clean install (from inside Windows 7 Home Edition, copy the upgrade you can do).
    The key, with what they gave me would not work with the Windows anytime upgrade utility.

    I think that I have installed everything that I need to get the laptop to work, but I'm not sure of the configuration of the battery. The cooling fan seems to be always on, and when the battery reaches 100% charge that he also said that he is in charge.

    My questions are:
    1. is there another program I have to install to allow the computer manage settings of the battery?
    2. do I need to change some settings in the power options?
    3 should. what settings I change in power options?

    Any help would be welcome
    Kind regards
    Alex

    Toshiba Satellite R830-182
    Install Windows 7 Ultimate, clean (because my University product key does not work with the windows anytime upgrade)

    Toshiba programs installed
    * EcoUtility
    * HDD Protection
    * Resolution + Plugin
    * Sleep utility
    Value of additional package

    Programs running in the taskbar
    * Dropbox
    * TwoFingerScroll
    * Avast antivirus Home edition
    * Intel HD Graphics
    * Synaptics pointing device
    * The Bluetooth Manager
    * Drive optical autolock
    * EcoUtility
    * HDD Protection
    * Programs standard windows 7, Center of Action, battery, speakers, wifi.

    Hi mate

    I think this Toshiba document should help you get the best power settings

    + How to manage Windows 7 power management features.
    http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

    Usually if the battery is fully charged, the battery indicator should move from orange to blue (or green).
    If it does not then it means that the battery still in charge.

  • Key the Option for monitoring REMOT sx20

    SX20 shows "snapshot requires a key option for remote monitoring. but I have not received any key option with the option key of remote monitoring feature of Cisco. another link said remote monitoring option will require additional cost of 1 January 2016. Now my question is how to activate it and if it takes the cost what is the part number for key option for remote monitoring...

    The obligation to have a key Option Remote Monitoring installed to see snapshots of the cameras and the content on the page of the Web Interface call control was introduced in the version of the TC7.3.3 software.  If you are running a version of software before that, then you will be able to see the snapshots without such a key installed.

    To get the key of the remote control, you should buy Cisco, is around US $100 price per endpoint.

    The license you wish to lie beneath the level superior SKU L-TP-RM.  Then choose L-C-SERIES-RM, L-MX-SERIES-RM, L-SX-SERIES-RM, L-EX-SERIES-RM or L-TEACHER-SERIES-RM below, according to what end point of model you need to.

    There are a number of people in the forums who see it as nothing else that a money grab from Cisco as they now charge for a feature that should be free.

    This has been discussed several times in these forums before - some links to sample on this feature, the necessary licenses, and problems with the features are:

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Key transfer

    Hello

    I have 2 computers. Computer 1 just died because of a hard disk failure. It was upgraded to vista and windows 8 pro on this subject. 2 computer initially had the OEM of windows 8 and now windows 8.1. Can I transfer the computer 1 pro license (which is unusable) to computer 2.

    I know it's possible with the Office of 2013, as all I had to do was to disable the installation of the machine unusable, can even be done with the operating system.

    Thank you!

    STTD

    Yes, you can, but you will need to reactivate over the telephone. You can improve Windows Pro 8.1 to 8.1 Windows installation by using the Windows 8 Pro key.

    Press the Windows key + X

    Click System

    On Windows, click the link:

    Get more features with a new edition of Windows


    Click on the "I already have a product key link.

    Enter your product key and you will be promoted to the Pro.

    -------------------------

    1. press the Windows key + X , and then click run, and then type: slui.exe 4


    2. then press the ENTER"" key.

    3. Select your "country" in the list.

    4. choose the option "activate phone".

    5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    6. explain your problem clearly to the support person.

  • Apple ID security question is not displayed the reset option?

    Hey guys, so I hope someone here can help me, I spent 2 hours on the phone last night trying to solve this problem for my mother.

    She forgot the answers to his questions of security and cannot buy credits on games. The last time we had this problem, I sat down with it and fixed it by reseting simply questions.

    This time, however, whenever we go to modify the questions he asked us to answer 2 and there is no option to reset the?

    We have an email from rescue set up (my only) for if that were to happen, but the support call last night told us to answer questions to send e-mail and theres no other way around it.

    Help, please!

    Also if it is in the wrong community please point me in the right direction! BRAVO!

    If you have not already, follow these instructions.

    https://support.Apple.com/en-us/HT201485

  • When you try to join my key, the option "Attach my public key" is deleted so I can't use it.

    This is a reference to the "Digital Signature and encryption of Messages. When you try to send my key by e-mail, the option "Attach my public key" is deleted so I can't use it. I have a work around, but it's a little embarrassing.

    Any ideas?

    Thank you very much

    Kevin

    When your issue has been resolved can mark this thread as "solved" Please?
    Thank you.

  • Call transfer option removed!

    Hello

    We have a paid subscription, but the latest version of Skype (6.3.0.105) seems to have the call forwarding option removed entirely? This is unacceptable!

    I realized that the monopolies with companies that have a financial return will never get my support. Microsoft buys Skype and then practice the age-old technique of - redeem and make your competitor - buy "below" your development "offered superior" (Lync). Well, I have a comment for you Microsoft, why not just step up your game and make your Lync project higher to attract businesses. But not for you to appear large - Lync, you must go and alter the largest acquisition by removing an element key business as call forwarding. I do not trust you Microsoft, no. integrity.

  • Question of law activation key sticker.

    Okay, so I have a unique problem. The company I work for asked me with the redesign of several computers. All of these computers are distributed by a company called Nexlink, which is no longer, we do business with. Many of these computers in XP, but despite this, they have Windows activation code stickers on the case for other versions of Windows (some Vista and W7 a few). I have no idea why it's that way.

    My question is, is it legal for me to use these codes if they work? These computers are specced for W7 and XP end support, it would make my job a lot easier if they were running a more modern operating system.

    Okay, so I have a unique problem. The company I work for asked me with the redesign of several computers. All of these computers are distributed by a company called Nexlink, which is no longer, we do business with. Many of these computers in XP, but despite this, they have Windows activation code stickers on the case for other versions of Windows (some Vista and W7 a few). I have no idea why it's that way.

    My question is, is it legal for me to use these codes if they work? These computers are specced for W7 and XP end support, it would make my job a lot easier if they were running a more modern operating system.

    Your company likely took the demotion available with these systems right. If the COA sticker list Windows Vista Enterprise or Windows 7 Professional, they can be downgraded to Windows XP Professional for compatibility or standardization on an image of the company to facilitate their deployment.

    If you have access to reinstall media of Windows Vista Business or Windows 7 Professional, Yes, you can use the product key to upgrade to the edition in question appearing on the certificate of authenticity.

  • Question about VCS 7.1 Media flow-thru

    We currently have a way to call that looks like this:

    Endpoint (SIP and H323) > VCS control > VCS - E (SIP and H323) neighbouring area > firewall > neighbouring area to the CUBE (NOT only).

    When the VCS-E they interact SIP to H323 he directed media flow-thru allowing traffic through the firewall because it proxies all media and signaling.  However, if the call all the way SIP, it will proxy the call signaling but not the media.  Right now, we have it working, but we need to convert SIP H323 calls then back to SIP for it to work.

    Is there a way to force the VCS-E to proxy all media to the CUBE, rather than some media of interoperability calls?  I know it's usually what a crossing area is for, but AFAIK that does not work when you use CUBE to VCS-E.

    VCS - E has obviously the hardware capacity and processing to do this (because he now works via workarounds) so I hope that there is a way I can do a little more cleanly.

    Hello Nick!

    I don't know your deployment, especially when you run a nearby area of the

    VCS - c to the-e probably works, but you should know how it behaves for really knowing why

    to use it, and a hack so save licenses is often not the best starting point.

    You can configure the routing of locking media which will link the media to the vcs-e.

    (this may not work with all types of areas, at least all the profiles of the area, but at least it does with custom)

    *h xConfiguration Zones Zone [1..1000] Neighbor SIP MediaRouting Mode:

    "Specifies how the VCS handles the media for calls to and from this neighbor, and where it will forward the media destined for this neighbor. Signaled: the media is always taken for calls to and from this neighbor. It will be forwarded as signaled in the SDP received from this neighbor. Latching: the media is always taken for calls to and from this neighbor. It will be forwarded to the IP address and port from which media from this neighbor is received. Auto: media is only taken if the call is a traversal call. If this neighbor is behind a NAT the VCS will forward the media to the IP address and port from which media from this zone is received (latching). Otherwise it will forward the media to the IP address and port signaled in the SDP (signaled). Default: Auto"

    You must find the area id, then enter in the tsh - cli (admin ssh access):

    (replace with your number)

    xConfiguration Zones Zone Neighbor SIP MediaRouting Mode: Latching

    There are other options that might be of interest as setting routed to this area for ever,

    interwork or custom zone settings options, I would recommend that you're looking for by using the command line and Administrator's guide

  • Hi, I'm new to animate so please be patient if this is a silly question. Problems with receiving the option loop 'play once' in the properties panel to work.

    Hello world

    I created a graphic symbol, then a test fast and then selected animation symbol on the stage (this did not bring the loop for me option in the properties panel initially), when I chose the last keyframe of the animation in question then selected the symbol on the stage, I was then only able to access the loop drop-down list in the properties panel. However, after you select 'play once' and test movie he continued to loop.

    Has tried to enter the symbol (in vase clos-sorry not sure of the exact terminology) and created the animation, then left the isolation and made sure that the animation was enough images in the scenario main and tried and still had a continuous loop.

    I used the stop(); action on a clip before that worked well, but who did a very basic animation; This requires several objects moving and stop at different times and I found the stop action interrupts the entire animation at that time here.

    So I have 2 questions:

    How we use the function 'play once' to make it work because that seems like the easiest option for what I want to achieve.

    Or how to effectively use code to stop and start the animation when I need to?

    Thank you in advance for your help!

    publication settings, disable loop timeline

  • A question about the SHIFT key

    I'm trying to force the text to capitalize or not into typing user function, but do not want to use a simple input field. Can I do something like the attached code along with a check because if the SHIFT key pressed isDown?

    Also, is there a reason that I can't use the delete key to perform an action - right next to her in bad shape? I found a simple trace but can't make it work:

    on {('< delete >' keyPress)
    trace ("hit");
    }

    Thank you

    Sorry for this question, I realized just after dumb how it was. Use listeners and ASCII key Code... duh.

  • Qosmio F10: Question about the CD key and waste product

    I bought a laptop Qosmio F10 a year ago. However, it is only now, someone mentioned that is fails to my OS I will need to reinstall.
    They asked if I had the disc and product key. I said no. Why do not the two points mentioned above provided for me on buying?
    I'm just a user not an expert.
    All the answers at all would be appreciated.

    Hello

    It is strange that the laptop has been delivered without CD or DVD.
    Usually, you should get the media recovery, Tools & Utilities CD and possibly a Qosmio CD player.
    On the recovery CD, you will find the image of Toshiba. This image that you could install every time. The operating system on this image is already enabled and you don't need the product keys.

    If you don't have a CD you can order it from the service partner in your country.

Maybe you are looking for