Question on access to the dataProvider of a converter of element Info

Similar Questions

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• Newbie question on access to the RADIUS server

  I've worked before on RADIUS servers running on Windows but not on Unix. I'm new to an environment without any documentation and I make sure I have access to the GANYMEDE/ACS config.

  I go to my config switch and I see that ' 10.0.0.1 radius-server.

  Then I ssh into ' 10.0.0.1' and I see the below after "method.

  From the bottom, you have an idea on how to access the configuration of the ACS in case I need to change any setting it? I tried http://10.0.0.1 but it does not work.

  -bash-3, $00 ls
  bin features core net sbin TT_DB
  Start the etc. opt system usr lib
  export of CDROM lost + found tftpboot var platform
  dev House Dem proc tmp flight-bash-3. $00 ls
  bin features core net sbin TT_DB
  Start the etc. opt system usr lib
  export of CDROM lost + found tftpboot var platform
  dev House Dem proc tmp flight

  Try http://10.0.0.1:2002 for ACS listening on port default 2002.

  Pete

• Firewall exceptions for access to the online content for first 14 elements

  Hi Adobe community.

  First 14 elements doesn't seem to be coping very well being located behind a firewall and have access to the internet (for online content) through a proxy (configured by proxy.pac... can't change that). Anyone would be able to provide the URLs/DNS names/IP addresses of the IP ports and Protocol (TCP/UDP) that I have to allow through the firewall for first Elements have access to online content?

  Thank you and congratulations in advance

  Peter

  Hi ATR & one who reads this.

  I come to the solution by using Wireshark to analyze what happens when Premiere Elements wants to download content such as 'titles and text. As mentioned previously, seems many internet traffic resumes with success the proxy settings correct and is therefore through the proxy server.

  Managed to get the Premiere Elements to download content online by allowing the following FQDN on the Cisco corporate firewall (not for the first relevant destinations are blocked on our proxy):

  HTTP static.photoshop.com

  Hope this helps someone out there.

  See you soon,.

  Peter

• Questions for access to the synchronized iCloud songs

  Hello

  I have problems when trying to access previously synchronized in iCloud with no local copy of the song. The song is grayed out, I can't play, there is no way to download a local copy. It appears in my library, but I can't play, it's as if it was useless. Any solution to this?

  My entire library is synchronized with iCloud, and to save space on my hard drive, I've deleted almost all the local copies. Now, I can not play almost anything.

  Thank you!

  Mickael.

  OK I found the solution, I had to uncheck the 'Show Apple Music' in the preferences.

• Simple question of accessibility of the Checkbox

  Hello

  Apex 4.2.4 I a "simple checkbox" column in tabular form, with this definition:, (i.e. the means recorded Y, unchecked means NULL)

  The generated markup is as follows:

  < class td = "data" >

  < label = "f06_0003" class = "hideMeButHearMe" > PublicAccess? < / label >

  < input autocomplete = "off" name = "f06_NOSUBMIT" value = "Y" id = "f06_0003_01" onclick = "if (this.checked) {apex.jQuery('#f06_0003').val('Y') ;} else {apex.jQuery('#f06_0003').val (») ;} "type ="checkbox">

  < input autocomplete = "off" name = "f06" value = "" id = "f06_0003" type = "hidden" > "

  < table >

  As you can see, there is a divergence between current etiquette 'for' attribute and the entry id. This triggers an error our accessibility verification tool.

  I'm not an accessibility expert, but it seems wrong indeed and seems like a bug to me. Any ideas to fix this?

  Thank you

  Luis

  Luis Cabral says:

  Apex 4.2.4 I a "simple checkbox" column in tabular form, with this definition:, (i.e. the means recorded Y, unchecked means NULL)

  The generated markup is as follows:

  PublicAccess?

  As you can see, there is a divergence between current etiquette 'for' attribute and the entry id. This triggers an error our accessibility verification tool.

  I'm not an accessibility expert, but it seems wrong indeed and seems like a bug to me. Any ideas to fix this?

  Very bad. The HTML specification states that entry command such as hidden are not labelable. This Mozilla bug indicates that browsers (Firefox at least) will ignore these labels. Even if they don't always get you with a checkbox that is unlabelled. It is clearly a bug. APEX should show the for attribute of the label element the ID of the check box:

  PublicAccess?

  Workaround solutions:

  • Use a dynamic refresh action to execute some JavaScript to set the for attribute correctly.
  • Do not use the built-in simple checkbox control. Generate equivalent to the code above with the correct labelling as a column in the query source region.
  • Do not use a tabular presentation.

• Question of access to the local file CS6 road

  I have an external USB drive with all the files on my local website for the customers, this disc starts to behave badly. I already backed up the files on another drive and I need to know if I unplug and do not take into account the original USB and attemnpt to access the files copied from another disk will be the paths automatically change?

  For example, if I have a folder with a path

  Original drive / folder with the local files / localdreamweaverfolder

  and try to access the same files with the original drive path change to

  Disc 2 / folder with the local files / localdreamweaverfolder

  will there be a problem?

  R

  You must change the site definition to point to the new location on the new drive. You should be golden, once you do this.

• Question regarding access to the catalogues and files to an external hard drive in 6 items.

  Having just acquired a DHM, I have successfully conducted a test of back up of a catalogue of photo of 6 2000 of an XP PC-based elements, using the Elements 6 complete the backup process. This process is intended to be used eventually to transfer it and other catalogs on a new Windows 8 PC installed with 11 elements.

  However, while I would also like to be able to access the image files and the data of the catalogue on the EHD for a Vista based laptop which also has some Elements installed 6. Can you please advise how to make this without a full restoration of process that would load all the files on the hard drive of my laptop.

  In the transfer of the EHD image I also seem to have lost the original structure of the file that was on my PC, as the files have been renamed numerically and are all files held individually in the main folder of the ehd. While is not too serious a lot while the files remain on the EHD, provided the catalog always knows where to find them, has the structure of the file original been permanently lost, or I can it recreate when I finally to restore the files and catalog on the new PC in Windows 8?

  I can't wait to get this process right as I have a much bigger catalog similarly backup and transfer, once I was able to acquire the new PC and hoped to be able access the same way this catalogue by my laptop of EHD. given the lack of hard drive space on my laptop to contain all the 20 000 files that are involved.

  Help, please

  179 of the gardener

  However, while I would also like to be able to access the image files and the data of the catalogue on the EHD for a Vista based laptop which also has some Elements installed 6. Can you please indicate how do complete it without a restoration process that would load all the files on the hard drive of my laptop.

  When you are restoring, say you PES to restore to a new location, this place being on the EHD

  In the transfer of the EHD image I also seem to have lost the original structure of the file that was on my PC, as the files have been renamed numerically and are all files held individually in the main folder of the ehd.

  In fact, you have not lost this file structure. When you perform the restore, the folder structure will be returned to as it was.

• Question on access to the fields in an AS3 tab

  My hierarchy looks like this:

  I have a

  < mx:Panel >

  < mx:Button label = "Add a user" click = "addUser (event)" / > "

  < mx:Tab

  < / mx:Panel >

  the value creationPolicy = "all" on your tabnavigator.

  Kind regards

  Ranga G

• Essbase users have write access to the folder F:\Hyperion

  Guys,
  
  I have a question concerning access to the F:\Hyperion folder. Unalterable of Essbase users need to have write/modify access to the F:\Hyperion\AnalyticServices folder.
  I know that users who is using the Regional service Console should have change access to folder F:\Hyperion where EAS Console is installed. I wonder because when we allow
  connection request for users, the .qlg files will be created in the folder of the database with the information of the users.
  
  Other than AnalyticServices(if needed) or AnalyticAdminServices, are there other issues that we need to provide some access to normal users (HFR)?
  
  Thanks in advance,
  HYPuser

  Normal users need not access to this folder. Only administrators may need to access to the file for the purpose of loading data from the server files.

  Kind regards

  John A. Booth
  http://www.metavero.com

• FAILED: An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination

  Hello world

  I get this error when I try to convert a machine, this machine are in the same network with others that I had no problem to convert, the error occurred in 1% complete. I tried several other suggestions from others posts, with no luck.

  I have vmware converter 5.5.2. Someone at - it something idea?

  Thx a lot.

  Your error is:

  2014 08-18 T 06: 49:12.641 + 02:00 [10064 "Default" warning] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server cld01vmwh18.replycloud.prv:902

  Need to allow access to the machine to be converted to cld01vmwh18.replycloud.prv:902

  HTH

• Question of access list for Cisco 1710 performing the 3DES VPN tunnel

  I have a question about the use of access lists in the configuration of a router Cisco 1710 that uses access lists to control traffic through the VPN tunnel.

  For example the following lines in a configuration on the remote router. My question is whether or not the traffic that matches the definition of list access-130 (something other than 192.168.100.0/24), cross the VPN tunnel or go directly to the Ethernet0 interface.

  My understanding is that traffic that matches the access list 120 would be encrypted and sent through the IPSec tunnel. If there was "ban" set out in the statements of 120 access-list, the traffic for those would be sent through the IPSec tunnel but not encrypted (if possible). And finally, given that the definition of crypto card reference only "adapt to 120", any traffic that matches 130 access list would be sent Ethernet0 but not associated with the card encryption and thus not sent through the IPSec tunnel. "

  Any input or assistance would be greatly appreciated.

  Map Test 11 ipsec-isakmp crypto

  ..

  match address 120

  Interface Ethernet0

  ..

  card crypto Test

  IP nat inside source overload map route sheep interface Ethernet0

  access-list 120 allow ip 192.168.100.0 0.0.0.255 10.10.0.0 0.0.255.255

  access-list 130 refuse ip 192.168.100.0 0.0.0.255 10.10.0.0 0.0.255.255

  access-list 130 allow ip 192.168.100.0 0.0.0.255 any

  sheep allowed 10 route map

  corresponds to the IP 130

  He would go through the interface e0 to the Internet in clear text without going above the tunnel

  Jean Marc

• How to block the data grid to access the first row when updating the dataprovider

  Hello!
  
  I'm pretty new to Flex, and wonderfully, I have a problem. :)
  I use an AdvancedDatagrid to display data from a server with HTTPService. The script calls the server every 10 seconds (with timer) to update the displayed data.
  When I scroll the list and select an item (to see detailed in a textarea content) and the timer just fires, datagrid automatically jumps to the first line.
  My question is, how can I avoid this behavior?

  In addition, if the selectedIndex property is not visible, you may need to define verticalScrollPosition.

  think a little more, also record the value of the Boolean and game too.

  Finally, after assigning the dataProvider, you will need to use callLater() to delay defining the dgPosition

  Tracy

• Access to the Instance of the class within the component TileList DataProvider?

  I have a TileList component that is powered by a DataProvider.  The DataProvider place a class from the source (and the corresponding MovieClip) in the TileList in the form of Visual and interactive objects.

  dpChords.addItem ({label: tt, source: ChordUnit, data:, scaleContent:true});})

  How to pass unique values for instances of the 'ChordUnit' within the TileList?

  public void setChordBin(song:int):void {}

  var dpChords:DataProvider = new DataProvider();

  var i: uint;

  / / determine the game of rope

       If (song ==-1) {}

  activeChords = allChords;

       else {}

  activeChords = songChordSets [song];

       }

  / / filled dataProvider

  for (i = 0; i < activeChords.length; i ++) {}

  var TT = activeChords [i];

  dpChords.addItem ({label: tt, source: ChordUnit, data:, scaleContent:true});})

  }

  chordBin.dataProvider = dpChords;

  FORMATTING

  chordBin.columnWidth = 105;

  chordBin.rowHeight = 115;

  chordBin.direction = ScrollBarDirection.HORIZONTAL;

  chordBin.setStyle ("contentPadding", 5);

  chordBin.setRendererStyle ("imagePadding", 0);

  chordBin.scrollPolicy = ScrollPolicy.ON;

  / / set of style for labels

  chordBin.setRendererStyle ("textFormat", textFormat2);

  / / set the background skin

  chordBin.setStyle ("skin", lightBackground);

  set the CellRenderer

  chordBin.setStyle ("cellRenderer", MyTileListRenderer);

  EVENTS

  chordBin.addEventListener (ListEvent.ITEM_ROLL_OVER, chordBinItemOVER);

  chordBin.addEventListener (ListEvent.ITEM_ROLL_OUT, chordBinItemOUT);

  chordBin.addEventListener (ListEvent.ITEM_CLICK, chordBinItemCLICK);

  }

  I think you should you rewrite ChordUnit class so that path is defined. There are several way to do. One of the ways can be:

  public void ChordUnit(url:String):void {}

  imagePath = url;

  loadDiagramImage (imagePath);

  }

  So, in your setChordBin you can instnatiate directly:

  for (i = 0; i

  var TT = activeChords [i];

  dpChords.addItem ({label: tt, source:new ChordUnit("youUrl.blah"), data:, scaleContent:true});})

  }

• The DataProvider data label text

  Hello, I have a table that I add to as follows (dpColours is a table):

  dpColours.push({label:"Black"});)

  This table is then added to a dataprovider that is then added to a drop-down list.

  My question is how can I find the text of a certain element of the DataProvider data table?

  I can't do this: dpColours [0] .text to what I do? I want to retrieve the text 'Black' of the dpColours of the table.

  Thank you

  Noah NAKED

  Hey Noah,.

  just like how you add the 'label' property to the table, you can access the same way. you had the right idea, just need to change the .text to .label and it goes out of the label 'black' property that you inserted:

  dpColours[0].label
  

  also if you want to access the actual data provider, do you the same way. say if the data provider name is "PD" you acceding by:

  dp.data[0].label
  

  hope that things cleared up. Good luck!