Question on erasing the HARD drive and partitions

Hi my name is Fanta and I want to sell my laptop to someone, but I want to avoid impersonation so.
I'll use an erasure software that will wipe away my whole HARD drive until there is no data.
This is why I would like to know if there is a recovery on my HARD drive partition ready, and if there is a partition to the HARD drive recovery.

Wipe tool will wipe the partition on the HARD disk. If he wipe the partition will take the recovery partition and if I need the recovery partition and I don't what will happen?

Hello

Generally, you won't find any recovery on the HARD drive partition. The Toshiba Recovery CD should always be supplied with the device. It must be only installed the operating system with the Toshiba drivers and utilities.
However, if the Erase tool will also clear your partition then all files and data will be deleted.

The HARD drive will be formatted again during the installation of the OS. If you want to use partitions on the HARD disk, you can create it in addition with Magic8 Partitions. I use this app and it of very great.

Tags: Toshiba

Similar Questions

  • How do I completely erase the hard drive and reinstall everything for Windows 7?

    I want to completely erase a hard drive on a laptop, that I intend to use when traveling.

    Then I install windows 7 (which I bought) and my other programs

    Can I get step by step please

    Thank you

    Wanda Gill

    Some read to you... Installation of Windows 7

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

    But before you begin, make sure that your computer and the applications and the current programs are Windows 7 friendly...

    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

    And check your programs here too...

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  • ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

    WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

    Welcome to the forum!

    Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

    Good luck.

  • My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

    Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

    To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

  • Where could I find, live disc or other to restore the HARD drive recovery partition?

    Hello I have an A300 system 9 1M unit.

    I need to restore the HARD drive recovery partition, I had to change the hard disk drive, because he's dead.

    Is there a link where I could download the files? IMG to ISO or any other program that can create a new partition for recovery on a new drive?

    This computer is not under warranty, because it has more than 4 years.

    Thank you for all the support you could give me

    SEB

    PS: second question: which little hard drive disk could I buy for this model? Wich, 2 1/2 hdd and sata connector? IDE? I do not know.

    Post edited by: Seaone

    Hello, I have another question, how do I recognize the type of connector of the drive in this laptop?

    It's a sata II or sata 3.0 compatible?

  • Equium M70: Size of what OS on HARD drive and partition of creation

    Hi all
    I reinstalled my os using the provided recovery CD. The new hard drive I'm helping him right now is a WD 120 GB sata drive.

    My question is, what is the normal size of installation on the hard disk for the operating system? Is it possible that 6.98 GB as shown in the C drive properties? Also how can I perform a full reformat on drive C and that in order to partition the hard drive into 2 separate drive?

    Thanks for any help!
    Károly

    The Toshiba Recovery CD contains not only the operating system, but also different applications, driver and utilities. The whole software needs space on the HARD drive and 7 GB is nothing unusual.

    If you want to create multiple partitions on your HARD disk, you do not need to format all of the C drive but you could use a 3rd party software like Partition Magic 8 to create partitions
    This tool is awesome, you can control and manage the partitions very easy.

  • How to reformat the hard drive and do a "clean" install

    A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

    Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

    Thanks in advance

    Skip

    Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

    http://www.theeldergeek.com/disk_management.htm

    In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

  • I need to format the hard drive and it won't let me because the program is running.

    Please help someone... I have a desktop running windows 7.  I need to format the hard drive and it won't let me because the program is running.

    Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it.  I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.

    Thanks for any help given, I'm desperate.

    Original title: help with windows 7

    Reinstall Windows XP
    http://michaelstevenstech.com/cleanxpinstall.html

    Insert your Windows XP CD, and then restart your computer.

    When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

    To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

    http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

    Windows XP will go into its configuration process.

    Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

    Press F8 on your keyboard to accept the license agreement

    Select the partition, and then press D on your keyboard to remove it

    Select Format the partition using the NTFS file system

    Press F on your keyboard to start the formatting.

    Installation files will now be copied to your hard drive

    Your system will be rebooted, the installation of Windows XP will continue

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • Reformat the hard drive and a clean reinstall of Vista

    Hello
    I was wondering if you could advise me if this is possible.
    I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

    is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

    mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

    Partition and reinstall Vista? I'm sure that the answer is Yes, but my main concern is to ensure my "serial key" is accepted and that the activation

    process will go smoothly. Read other messages I prefer not to use Vista to reduce the size of the XP partition and prefer to make one

    clean install.
    Your help and feedback will be greatly appreciated.

    On Thu, September 16, 2010 08:40:58 + 0000, rainb0wman wrote:

    I was wondering if you could advise me if this is possible. I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

    is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

    mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

    Partition and reinstall Vista?

    Yes. Do a clean install of Vista and leave this formatting occur
    the first stage of the installation.a

    I'm sure that the answer is Yes, but my main concern is to ensure my "serial key".

    You mean the product key, not series.

    is accepted and that the activation
    process will go smoothly.

    You can reinstall and reactivate as many times as you need or want.
    No problem. Worst case, if it's some time since the last
    activation, you may need to activate by phone call, but it's
    quick and easy.

    Ken Blake, Microsoft MVP

  • Windows 7 says this isn't authentic after changing the HARD drive and can not activate

    After a Windows Update I received a notice that my version of windows was not authentic, which is false because I had windows on my laptop because I got it 4 years ago. Recently, I had to have the changed HARD drive as it corrupts. Installed new HARD drive and partition it a space in which the old files to hard drives. Seemed to turn very well when HARD drives were exchanged and windows installed on the new drive until windows update. My Microsoft certificate key is passed out to illegible but I don't have the product key for the OEM version. Any help would be great, thanks.

    If Windows was preinstalled on your computer, you can enable using the code from the sticker on the computer.  If you can not read the sticker more, you will need to contact the computer company he built.

    If you purchased Windows from the store, you can enable using the code of the case/box/CD.  If you can't read it, you must contact the retailer who sells to you.

  • I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

    Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

    I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

    I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

    Any help would be welcome.

    Thank you!

    So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

    Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

    Adobe Lightroom - find moved or missing folders and files

  • Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

    Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

    You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Repair shop wiped the hard drive and gave the wrong version of XP

    I have an Acer Aspire one model ZG5, which came with XP home. While still under warranty, the pad has stopped working and would then start is more upward. I sent it in for repair, they wiped the hard drive and fixed my problems. Except, instead of reinstalling XP Home Edition, XP Professional installed. I can't use my computer without first professional activator, which I just can't do it, and I don't have a version of the House that I can install myself. I wouldn't rather to pirate a copy, but I'm not sure how to get a copy of the House, I already bought once and do not feel that I should buy it a second time. How could I go solve this?

    Back to whom you have sent your computer for repair and request that they make good (on) copy of Windows back or give you a license key valid for the version that they installed.

  • I have a winsock error, so IE won't connect, even though it says I have full signal. If I format the hard drive and reinstall xp it will fix the problem?

    Winsock error

    Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

    Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

    Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.

    Note the devices installed in the machine.  Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

    Uninstall the software/drivers for network devices.  Turn it back on.  Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working...  Note all errors and post them here.

    netsh winsock reset catalog
    ipconfig / renew
    ipconfig/flushdns
    ARP d *.
    nbtstat - RR

Maybe you are looking for

  • No credit card

    Qhen I wan to outraged current already donladedapps it * me for a credit card. How a you where put you "no"? for a map

  • Custom control with couple or the input voltage system

    Hello I'm relatively new to LabVIEW and this is the first time that I'll use for an application of movement. I have a controller/chassis cRIO-9074 with a few modules NI 9514 IO, servo motors and drives, and I'm trying to do is to use a custom control

  • Help - Audio Service is NOT running - Windows Vista

    Hello I checked several websites & forums solution to my problem before asking the question here. A week Audio feedback from my computer started to give me problems. At first the audio suddenly stops during normal operation & would not return unless

  • uwebcam.exe crashes

    have... appcrash application name uWebCam.exe How can I repaire it

  • Need permissions in Win 7 to take possession of the corrupt administrator (user) account

    I have a corrupt administrator user account that is only available in safe mode, at the command prompt.  I created another user account that gives me the Windows interface and I'm now trying to "own the administrator account to copy my files to my ne