Question on the creation of a wireless network with small size

Similar Questions

• Questions about the extension of my wireless network

  I have an active Airport Extreme router and work well, but in some parts of the House, the signal is not strong and television puts buffering all the time (every five minutes).

  So I bought a second thought extreme airport to expand my network.  But I do not seem that it is correctly configured.

  Can you please help?

  (1) if BOTH routers be separately connected to the internet? or the other should be wireless talk to first?

  (2) must have both routers have the same name or different names?

  (3) if they have different names, we will see the two networks as we move into the House? The connected device (phone for example) will have to switch from one to the other networks?

  Thank you

  Joyce

  (1) if BOTH routers be separately connected to the internet? or the other should be wireless talk to first?

  Certainly the second... it is connected by wireless and extends wireless... That is to say there is no ethernet... However, you can make another type of configuration... Please tell us if there is ethernet available where you want the second AE located.

  (2) must have both routers have the same name or different names?

  They have names... but even wireless name different base station.

  (3) if they have different names, we will see the two networks as we move into the House? The connected device (phone for example) will have to switch from one to the other networks?

  When you extend wireless that they use the same name and you will not even know what unit you are connected to.

  Try again install... reset factory EI and place it in the same room as the main AE... and to run the installer... It should pretty well automagically select wireless configuration expand properly.

  Place then the second AE where it becomes the first good signal, but can still extend that to your dark area... wireless wise.

  Please post again if you try to do it with ethernet between the main and the secondary airport.

• [Urgent] Question on the production of many PDF documents with small variations (custom paper certificates)

  Hello

  I don't know if my description of the problem would be helpful, but I'll try to find a solution to this urgent problem. I don't even know if I can do this using Acrobat (or other tools) but I will be really grateful for any tips or tricks

  OK - so I'm trying to create certificates in paper 90 + for participants of an event. Each paper certificate would require their names thereon. This is the only difference between all certs 90 +. Foramatting and other things is exactly the same.

  What I'm asking is - is there a painless way for, say, get Acrobat to retrieve the names of a list/database and generate 90 unique PDFs / certificates (each with a unique name of a person) or should I pass by copy - pasting into Microsoft Word for each of em?

  Thanks for your help.

  Why not use mail merge and merge tools in Word? Just read your info on a worksheet and use the output method "print document" to generate PDF files.

  678 http://Office.Microsoft.com/en-GB/Word-Help/Mail-Merge-using-an-Excel-Spreadsheet-HA102809 aspx

• can I erase the disc without any wireless networks

  I have a time capsule which is my wireless router.  I have not used for time machine because he has older backups of Mac and does not place to save my current iMac.  I can erase the disc without any wireless networks?  I do Air Port utility?

  I can erase the disc without any wireless networks?

  Yes

  I do Air Port utility?

  Yes, see the procedure below

  • Open AirPort Utility
  • Click on the image of the Time Capsule
  • Click Edit in the window that appears
  • Click the disks at the top of the next window
  • Click on clear disk
  • Choose the Quick erase option
  • Click clear

  The procedure will take only a minute or two

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Name of the mn500 base station wireless network (be) changed to MSHOME.

  Run a wireless network with the mn500 smooth base station for years.   Last Saturday the network name is MSHOME.  Any thoughts on what is happening or how to change back the name I assigned it?

  Sorry, I misunderstood.  You are referring to the name wireless ID SSID (Service Set).  It is defined in the configuration of your wireless router.  I'm not familiar with this particular router, but with most routers, you can use a web browser to connect to the router (your model, it is http://192.168.2.1) preference of a wired connection that to change the SSID will cause a disconnect wireless, connect you with password "admin" (unless it's been changed) and change the settings.  On most routers, hold the button Reset on the router will return to factory settings which is possible as to how this change could occur.  Links to the user guide and manual configuration is on this page:

  "The Microsoft Home Networking product documentation"
    <>http://support.Microsoft.com/kb/902461 >

  HTH,
  JW

• The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems

  It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance.  However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems".  Any help would be greatly appreciated.

  I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES.  Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.)  If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!

• set up a wireless network with 2 iMacs

  How to set up a wireless network with 2 iMacs?

  Need more information. Writing an effective communities of Apple Support question.

• Question regarding the purchase of laptop wireless

  Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:

  1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?

  2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?

  3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.

  I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.

  I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.

  In advance thanks.

  Padraig

  1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.

  (2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.

  (3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).

  I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)

  My home network is a cable modem which is connected to netgear powerline devices (2)

  (via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable

  .

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• connect to the internet by two wireless network adapters

  How can I configure the two wireless network adapters for both wi fi access points in a pc?

  Hi Myo,

  Thanks for posting your query in the Microsoft community!

  I'm sorry to inform you that, two wireless network adapters for two computer Wifi access points is not possible.

  From the second connection will connect to the network, one gets automatically disconnected.

  Please mail us if you have any other questions, and we will be happy to help you.

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• How can I change the name of my wireless network?

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this. And once this is done, have what I would do with my extreme and Express to continue them to work?   Any help would be appreciated. Thank you.

  Cheers, Peter

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this.

  You can change the name of the network using AirPort Utility as follows:

  • Run the AirPort Utility.
  • Select the AirPort base station and then, select change.
  • Select the wireless tab.
  • The network name can be changed in the field "name of the wireless network. Enter the desired name, and select update.

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.