Question on the CSC - ssm modules and aip - ssm in the ASA5500

Similar Questions

• What are different between the IPS and AIP - SSC and AIP - SSM?

  Dear all,

  I'm not clear about the IPS, AIP - SSC and AIP - SSM module which are different?

  Then, when we can use IP addresses?

  When we use the AIP - SSC?

  When we can use AIP - SSM?

  Thus, a different IPS and AIP - SSC and AIP - SSM material or the same material?

  Best regards

  Rechard

  AIP - SSM is an IPS Firewall ASA module.

  IPS is available in different flavors:

  -Device of the IPS 4200 series

  AIP - SSM - module IPS Firewall ASA

  -IDSM2 - IPS module on 6500 series switch

  AIM - IPS - map IPS on router IOS

  Please rate and mark post useful.

• -Renewal-license module CSC SSM

  Recently, my existing CSC SSM module license expired & I need to know the necessary steps & product ID to renew expired CSC SSM license module hosted on ASA-SSM-20 device:

  Tip,

  The system was laid off with Base & more license, 500 users.

  Yes, it's at the BASE and MORE.

  Please check the question as answered if that's the case, so that others can benefit from in the future.

  Take care

  PK

• Could not update the Antivirus model Cisco CSC SSM

  I have a Cisco ASA 5520, with Cisco ASA-SSM-CSC-10-K9. ASA version 8.4.3.

  Since two days ago, reason for automatic virus protection update for Cisco CSC SSM failed, error message as below:

  AntiVirusPattern: Model update: the download file failed for ActiveUpdate could not verify security information. The confidence of information database is damaged. Contact Trend Micro technical support... The error code is 62.

  The license is valid and the subscription is expired September 2014.

  Any body encountered a similar problem before?

  Any body has Trend Micro Cisco CSC SSM helpdesk contact?

  I can't find any info Trend Micro for Cisco CSC SSM.

  SCC Module tcaps 1144 is available on server Trend Micro safesync:

  See

  https://supportforums.Cisco.com/docs/doc-40231

• Upgrade of the CSC-SSM

  Hello

  A user ASA 5510 with ASA-SSM-CSC-10-K9 module with more-lic(Spam/URL/Phish), in recent years, he has not renewed the contract Smartnet (CON-SNT-XXXX) and its ASA CSC - SSM module subscription has expired as well.

  He now wants to upgrade to subscription CSC - SSM,

  (1) upgrade the module CSC - SSM with ASACSC10-50UP1Y (50 users ASA 5500 CSC-SSM-10 w / more Lic.) will solve its purpose or must it also renew CON - SNT as well.

  Because according to the Cisco document "" two services are necessary to the proper functioning of the CSC - SSM: Update software and Cisco SMARTnet® service. ""

  ((2) to renew the contract of Cisco Smartnet, what product it has need to renew the contract for one) would be - for module CSC - SSM -.

  ("SMARTNET 8X5XNBD ASA content Sec SSM - 10W / Usr 50 AV", or b) for Cisco ASA 5510? or (c) what will be the room code?

  ((3) at the present time, S/W of CSC - SSM version is 6.3.1172.0, he wants to renew 6.6.1125.0 - a) is this renewal fee? or (b) renewing most Lic / SMARTNet allows for upgrade version as well?

  Thanks in advance,

  Amit

  SMARTnet for the 5510 ASA with CSC is:

  CON-SNT-AS1C10K9

  SMARTNET 8X5XNBD ASA 5510 Appl w / scc10, SW, 50 Usr AV/Sp.

  SMARTnet coverage is a sine qua non for the subscription:

  CON-SNT-ASCS10K9

  SMARTNET 8X5XNBD ASA content Sec SSM - 10W / Usr 50 AV.

  Having these two will allow the user to improve and update.

  That said, the 5510 and CSC are ready to go end of sale. IHave you talked about their upgrade to 5512-X with module CX? It is a much more capable solution.

• Modules ASA CSC - SSM - any good?

  I wonder if anyone has opinions on whether or not this module is recommended from a stand-alone software solution. The environment is 400 users we focus mainly on url filtering, and anti-spam features would be also useful

  Thank you

  I have worked in several places with this module and it is very easy to use and works very well on small and medium-sized enterprises. The features that it offers are great. The follow-up is not so great, but it shows just the necessary details.

  I have also worked with websense and it's generally a better product, but if you already have the ASA and 400 users you can perfectly use the CSC - SSM.

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed

• Can we use latest version of modules and toolkits with the old version of LabVIEW core?

  Hello world
  I'm new to LabVIEW
  I have a question.
  We can use (indeed install) latest version of modules and tools (for example, 2009 or 8.6.1 version) with the old version of LabVIEW core (for example LabVIEW 8.6)?
  No problem?!
  I have 8.6 (rating) of LabVIEW and I want to istall 2009 real-time Module.

  No you can not do. But you can download and install Labview 2009 and module RT 2009 Trail for 30 days.

• Users for Module CSC - SSM

  Hello world.

  I went through the CSC - SSM product data sheet at http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/ps6823/product_data_sheet0900aecd80402e4f.html.

  In the license product he sai CSC - SSM 20 supports max 1000 users. What does that mean?  This means that I can't use CSC - SSM when the number of users is more than 1000?  If I'm not correct, what is the maximum number of users I can get behind CSC - SSM 20 so that it works efficintly when all features are enabled?

  Thanks in advance

  Deepak Khemani

  Hi Deepak,

  The numbers that you're talking about in the data sheet are a number of IP addresses of the single user inspected by the module. This account is a cumulative over a period of 24 hours. If the license is exceeded, the administrator will be sent an email once per day to inform them of this.

  -Mike

• question on the EMI and CSM

  Hello

  I installed IME to a server to manage the network IPS of 6500 package, and I would like to install on the same MCS server to manage the same Catalyst 6500 FWSM. I have several questions:

  -Can I have installed and running in the server IME and CSM sane?

  -CSM contain the same features EMI and much more?, I mean, that's enough with the CSM to manage FWSM and IDS-2 network of 6500 modules?

  -Do the MSC provides a better view of the FWSM newspapers than other applications? Which is the best tool to view the logs of the FWSM, I want to say is a tool like view newspaper checkpoint for FWSM?

  -My client has 2 Catalyst 6500 and 1 installed in each 6500 FWSM, two FWSM mode active/pasive redundancy, I consume 1 or 2 licenses of CSM?

  Thank you

  Kind regards

  Juan Luis.

  Hi Juan,

  - Can I have installed and running in the sane server IME and CSM?

  Yes.

  - Does CSM contain the same functionality of IME and more?, I mean, it is enough with CSM to manage FWSM and IDS-2 network modules of 6500?

  EMI offers various functions such as archiving and image management and implementation at level automatically and taking automatic backups, etc.

  - Does CSM provide a better view of FWSM logs than other applications?. Which is the better tool to view the logs of FWSM, I mean is there a tool like checkpoint log view for FWSM?

  CSM 4.0 is a tool that allows to display, filter, grep etc syslogs of all firewalls and IDSes.

  - My customer has 2 catalyst 6500 and 1 FWSM installed in each 6500, both FWSM running in redundancy active/pasive mode, do I consume 1 or 2 licences of CSM?

  CSM will be manage and watch one active unit only. The day before will just be a copy of the asset. So 1 license for CSM.

  I hope it answers your questions.

  PK

• How to put running or OFF controls the mouse on laptop or how do I get rid of modules and toolbars like conduit, spirit and friend spark Checker?

  Hi, are two quick questions, there any settings of the mouse on laptop computers. I use a mouse usb right now about this because the finger mouse does not work.

  are there ways to activate and deactivate? and how can I get rid of modules and toolbars as auditor of conduit and friend and spark of spirit? any help would be great. Thanks in advance

  Original title: CONTROLS the MOUSE for laptop

  Hello

  Thank you for your question to Microsoft Community.

  Quick questions:

  1. What browser version are you working?
  2. What is the brand and model of the laptop?

  Case 1:

  Mouse, touchpad and keyboard problems can have several causes:

  ·         Cables that are not connected correctly

  ·         Incorrect device settings

  ·         Missing updates

  ·         Corrupt or incompatible drivers

  ·         Hardware problems

  As a first step, you can check the status of the devices by following the steps mentioned below:

  a. click Start, type Device Manager in theStart search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. click Pointing device and check its status.

  Method 1:

  To enable the touchpad try these steps:

  a. click Start and select Control Panel.

  b. Select mouse.

  c. click on Device Settings.

  d. Select the touchpad device.

  e. click on turn on.

  Note: The steps above are generic to any model of laptop. The parameters may vary depending on your model of laptop.

  Method 2:

  If activation touchpad does not help, you can go ahead and uninstall the drivers of the touchpad and re - install the same thing again.

  To uninstall the touchpad drivers,

  a. click Start, type Device Manager in the Start search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. right click on the Touchpad driver and select Uninstall.

  d. restart the computer, if prompted.

  Also I suggest you to consult the following link.

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Case 2:

  Now for the question of the toolbar, if you use these methods follow Internet Explorer:

  Method 1:

  If an unwanted toolbar appears in Internet Explorer, you can turn it off using the Add-ons Manager. Sometimes, however, the problem may be more persistent. If the problem persists, start Internet Explorer in no add-on mode and then use the add-on Manager to disable all add-ons that you have not intentionally installed.

  You can see the following link for more information:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-8

  Method 2:

  Most toolbars can be removed using Add / Remove programs.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  You can also use the specific toolbar removal tool to uninstall or remove the toolbar from the computer.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thanks for posting the result and let us know if you need assistance on Windows.

  We will be happy to help you.

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• A question about Application module and bounded taskflows

  Hello

  One of my friends sent me this question that I could not answer. The question is:

  
  

  Your application contains a workflow bounded with four pages.

  The pages are all based on different application modules and the workflow has the property of transaction, the value 'Always Begin new Transaction, and a commit operation is defined as the return of the activity. The user makes a few changes on each page, but a validation failure happens on the links on the third page.

  Which of these scenarios describes the outcome of this situation?

  A. None of the changes on pages undertakes all are cancelled.

  B. pages one and two and four engaged; page three is not validated.

  C. changes to the first two pages are validated; changes on the last two pages are not committed.

  D. it depends on the value that has been set in the property Transaction on each module of the application.

  I suggest the answer is A, but the answer my friend is C.

  What is your suggestions

  Thank you

  You are right.

  The point of transaction is that a couple of operation may be validated or cancelled together.

  If a stubborn workflow starts with a new transaction, when he wishes to complete, he must call a task flow return activity validation or cancellation. They call the underlying commit() or rollback() operations on the associated data control framework, essentially validation or restoring all the data attached to the frame controls.

  
  

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/ADF-task-flow-TRANS-Fund-v1-1-1864319.PDF

• How to create a mobile blog page layout, combining the Business Catalyst Modules and function of mobile design of Adobe Muse?

  The title says it all. I love the ability of Adobe mobile design Muse and tablet of layouts and became very fond of the workflow between Adobe Muse and Business Catalyst. The only problem I found is the ability to integrate the module blog on a drawing of the design or the mobile tablet. I understand that Business Catalyst has insert you a code of the tag to create a page template for the blog to sit in but is possible to have a mobile phone and Tablet for the same blog layout? I'd love if visitors read my blog from their phone, did not have to move from a phone on a desk combination available just to read the blog. Once they have read / switch the blog, they can no longer return to the mobile version of Web site due to the page template that I posted to the blog. Overall, I want just the ability to have the blog to adapt to all mobile, tablet and desktop versions. Any ideas?

  It's a very interesting question. Your regular blog module should be fine for the tablet. For some time I did a mobile in British Colombia, but I think you can add a template to another blog layout module and use it. You should be able to actually build a custom template in British Colombia for that as well. Maybe pop on the BC Forum and see. There is a guy named Liam on the BC forums who probably knows more about BC some of the engineers. ;-)

  You can also add a link to the mobile device quite easily. You can even hide the link and show the iff only that the user is on a phone using the {system_visitorDeviceClass} tag in British Colombia.

  More information on that here: Introducing tablet & phone support for sites

• Order the questions in the FAQ module

  I'm trying to settle questions of FAQ Business Catalyst module.

  He puts them in alphabetical order by default so I have numbered the. But once he arrives at 10 he's obviously out of order.

  And the customer does not want to put a letter on the front. IE A, B, C

  Any ideas on how to achieve this?

  Thanks in advance.

  I just look at the "other Options" section of the FAQ and found "Weighting" option. This is the solution. The higher the number, the greater the weighting. So if you're not sure how much FAQ you'll start 99.