Question on the working time of the ASP in Africa is Uganda?
Hi, I bought all new laptop m70-340 from Dubai two months ago. a display driver factory default. Taken to ASP in Africa is Uganda. It's been four weeks.
Other Toshiba dealers and sellers give back 1 year warranty of basic, but FSA not Givin not a clear vision.
Confused about what to do?
Please suggest
Hello
I guess that there must be a hardware defect. In this case, the part needs to be replaced.
This alternative procedure takes slightly more time as usual because the service partner needs to order the necessary parts from Toshiba.
I think the delivery parts take more time in Uganda as European or other cheaper countries.
I think you could contact the ASP in Uganda and ask the details of the repair and delivery time.
Tags: Toshiba
Similar Questions
-
Backup Time Machine put on for the question of the judgment
I use time machine - mac pro to 2008 - 1 TB drive with its own power supply - 500 GB of backups.
Have had a few teething problems that don't seem to point to any problem-
Before stopping - if I just saved all the files - I always ask a time machine backup.
If I was just on the internet - I'm just asking for a backup...
Anyway I've asked immediately rather than wait a minute--but with problems at startup - decided to wait for the minute - about 15 seconds in the time-out has heard that the drive reports the time machine was starting a backup, so I canceled the stop & waited until the backup is complete.
So the question is if a time machine backup was cut by a stop - is there a point where it would cause problems with the next on power.
(I noticed that on a power which had a problem - time Annex machine backup was for the same time that commissioning - and I had stop watch at the same time I started up the next day)
notcloudy wrote:
I use time machine - mac pro to 2008 - 1 TB drive with its own power supply - 500 GB of backups.
Have had a few teething problems that don't seem to point to any problem-
Before stopping - if I just saved all the files - I always ask a time machine backup.
If I was just on the internet - I'm just asking for a backup...
Anyway I've asked immediately rather than wait a minute--but with problems at startup - decided to wait for the minute - about 15 seconds in the time-out has heard that the drive reports the time machine was starting a backup, so I canceled the stop & waited until the backup is complete.
So the question is if a time machine backup was cut by a stop - is there a point where it would cause problems with the next on power.
(I noticed that on a power which had a problem - time Annex machine backup was for the same time that commissioning - and I had stop watch at the same time I started up the next day)
Issues of time machine were related to my problems with Finder/Spotlight.
I put the drive time machine in the private domain of Spotlight.
A ran a disk check - no problem
Went into the preferences of time machine and instead of just turn on--changed the drive -.
time machine turned on
forced a return to the top
Entered time machine - deleted the backups of an IPHOTO library which had damaged (had deleted from the hard drive)
Time Machine works fine
It looks like nothing is everything
-
Question 1: The button "Buy now" does not work when you select a plan.
How to reproduce the problem:
1. go in terms of pricing and membership creative cloud | Adobe Creative Cloud
2. choose a plan, then click on 'buy now '.
3. you go to a blank page instead of the next steps in the payment.
Question 2: Can not select "Monthly Plan" for a "unique App."
How to reproduce the problem:
1. go into "https://creative.adobe.com/plans".
2. under "Unique App", select a product and then try to select the "monthly Plan" in the second menu drop-down.
3. for some reason, it isn't get selected and the price is replaced with the ellipsis (...). I expect the monthly price to appear.
Please notify.
Thank you.
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
Hello
Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit
OS: CentOS 4.6 X86_64
I have a question about the localTimeStamp function. According to the documentation for this function is
the same thing as current_TimeStamp except that the returned value does not include the time zone.Consider the following example:
SQL > create table tmptab (colval timestamp with time zone not null);
Table created.
SQL > insert into tmptab (colval) values (localTimeStamp);
1 line of creation.
SQL > select t1.colval, tmptab from t1;
COLVAL
---------------------------------------------------------------------------
24 JANUARY 14 09.45.42.253732 H + 01:00
SQL >
Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone
during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.
Could someone kindly tell me what I misunderstood?
Thanks in advance,
dariyoosh wrote:
Hello
Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit
OS: CentOS 4.6 X86_64
I have a question about the localTimeStamp function. According to the documentation for this function is
the same thing as current_TimeStamp except that the returned value does not include the time zone.Consider the following example:
SQL > create table tmptab (colval timestamp with time zone not null);
Table created.
SQL > insert into tmptab (colval) values (localTimeStamp);
1 line of creation.
SQL > select t1.colval, tmptab from t1;
COLVAL
---------------------------------------------------------------------------
24 JANUARY 14 09.45.42.253732 H + 01:00
SQL >
Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone
during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.
Could someone kindly tell me what I misunderstood?
Thanks in advance,
Then, when you do
create table t (neck DATE);
Insert into t (to_date ('1st January 2014', ' mon-dd-yyyy "");)
Are you surprised that it works? After all a DATE column contains a time component, you do not provide: but he
works and gives you 00:00:00 as the component "hour".
Similarly, the timezone component is being developed to automatically with, I think, time zone of your system.
-
I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?
Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support
-
Hi all
My job is: Loop While structure generates the signal for 4 seconds when you press the 'start build' button, after that data has been backed up. You press the button "generate the beginning' once again, and the loop runs one again.
My problem is: the first pressing, the loop, exactly 4 s (3, 999 s), but him second, third pressing on... The time elapsed is not 4 seconds, always smaller (even ~ s 0.003). The loop works correctly after press the "Exit" button and launch the program again.
How can I control exactly time loop work While Structure without the press "Exit".
Thank you any help!
P/S: I used the number of cycles (ms) just to look at a working time of the While loop.
NMCuong
This shows a quick solution
-
to refine my question. The Lasso tool does not work. When I select the content aware lasso shrinks and nothing changes. Help please.
A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:
-
See the previous question.
Double Post
-
simple question for the first time the user: someone please be a hero
Forgive the restorative nature of this question but the FM help files are surprisingly usless for the first time and users.
I did successfully a rectangle graphic. Now, I want to put some text in the rectangle. I see that I can't just click on and type. Apparently I have to, I don't know, do a "framework" of text or something? I don't see why this is so complicated or why the help docs do not begin at the obvious base.
Please throw me a bone and wander if this. I use 9 FM, but I am sure that the version is not serious.
Thank you!
There are two possibilities to place text on a chart.
One is to use the "text tool" in which you can type a string of text whenever you click on the slider. You can format the string, but you cannot apply a character tag or a paragraph tag. And you can't put a carriage return make several lines; to do this, you need to add the additional lines of text.
The line of text tool is the letter 'A' that appears in the icons when you consider > toolbars > toolbar graphics.
Second method is to create a text frame, and then type in it. You can apply paragraph tags, tags of characters, use of CRs and so on in a text frame.
Text frame tool is the small square with several lines in, just above the "A" icon in the Graphics toolbar.
-
What I want to do is-
The learner is asked a question from a Bank of questions - the questions are all the short answer questions (all are numeric responses only)
If the learner type the right answer - all good and learning proceeds to the next question in the question Bank and is awarded 1 point.
If the learner Gets the wrong answer, I want the learner to be presented at the same issue, but now the learner has a multiple choice question/answer. This response has 1/2 a point if it is correct. Learner proceeds to the question in the question bank.
If the learner chooses the wrong multiple choice answer as they are reset to 0 (zero) points and proceed to the next question in the question bank.
Is the highest possible or am I being too adventurous, with a Bank of questions?
I guess I'm looking to give to the student a second chance and try again the question however provide a different format for their response
I am using Captivate 8
Thank you
Question banks do not give you this level of control. If your questions were NOT in a Bank of questions you can use advanced Actions to redirect your learners to a slide of specific question based on their response. But you can't do that with question pools.
-
Satellite A200-1cr - two questions about the AC adapter / CC
Hello guys,.
I am owner of a laptop Toshiba Satellite A200-1cr and suddenly one morning, I can not charge my battery...
I tried with another adapter that I bought for another laptop a few years ago and it worked perfectly...
I have change the power supply cable before the adapter, that we... http://www.digitalkind.co.uk/INU_Products/INU_ProdDetailsL8.ASP?ref=57306972
and nothing has changed, I realized that I need a new ac adapt power...It's for my laptop... http://toshiba.icecat.biz/en/p/PA3290E-3AC3/AC%2520Adapter%2520120W.htm
But now I have two important questions...
1. since I tried, the power adapter works fine, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same features...
2. is the replacement of the power supply covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...
Thanks in advance and sorry for my English...
> 1. As I've tried, the power adapter works well, do you think that it can causes problems on my laptop or battery if I use it for a long time... I have to say that they had the same characteristics
If the AC adapter doesn't supports exactly the same specifications as the original Toshiba AC adapter so I wouldn't recommend using it! This could damage the motherboard! So if you want to use it you must make sure that the ampere, Volt and Watt values are the same!
> 2. The replacement of the power supply is covered by my warranty which continues to operate? or will I have to pay? I have two year warranty... and it is very important for me to know...
The AC adapter belongs to the laptop and it s covered by the warranty also.
So if you warranty is still valid, don t waste time and contact the ASP in your country!
Explain what s bad guys and I m sure will be able to help. The adapter must be replaced if it s defective!In this case, I would not recommend using 3rd party adapters if you will get a new ASP.
-
Yes, another question regarding the freezing of Safari - EtreCheck report included
Yes, another question regarding the freezing of Safari.
From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.
I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.
Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.
Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.
Thank you in advance.
Ben
-----------
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-28 22:48:58
Download EtreCheck from https://etrecheck.com
Time 05:45
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Apps are broken
Description:
Safari freeze when opening new tabs / switching between the tabs.
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 2.66 GHz Intel Core 2 Duo CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 389
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS23N)
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com. GoodShop.updater.plist
~/Library/application support/GoodShop/updater
A unknown file found. [Check files]
/ Library/Application Support/Symantec/virus
[no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]
/ Library/Extensions
[no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]
[loading] expressvpn.tun (20150118 - 2016-04-12) [Support]
/ System/Library/Extensions
[no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]
com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]
com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]
com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]
CMA: path: / Library/StartupItems/cma
RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon
Startup items are obsolete in OS X Yosemite
[loaded] 8 tasks Apple
[loading] 165 tasks Apple
[operation] 65 tasks Apple
[loaded] 45 tasks Apple
[loading] 161 tasks Apple
[operation] 83 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]
[operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]
[loading] com.epson.esua.launcher.plist (2015-06-29) [Support]
[operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]
[loading] com.google.keystone.agent.plist (2016-03-01) [Support]
[operation] com.mcafee.menulet.plist (2016-03-23) [Support]
[operation] com.mcafee.reporter.plist (2016-03-23) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]
[operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]
[loading] com.expressvpn.tap.plist (2016-01-27) [Support]
[loading] com.expressvpn.tun.plist (2016-01-27) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-01) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]
[operation] com.mcafee.cspd.plist (2015-05-08) [Support]
com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]
com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]
[operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]
[loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]
[loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]
[loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]
[loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]
[loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]
[operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]
[loading] com.symantec.navapd.plist (2009-09-14) [Support]
[loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]
[operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]
[operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]
[operation] com.symantec.symdaemon.plist (2009-03-27) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
com [running]. GoodShop.updater.plist (2013-09-24) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Application of Google Reader (Google Drive.app/Applications /)
Dropbox application (/ Applications/Dropbox.app)
ExpressVPN application (/ Applications/ExpressVPN.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
[ongoing] com.DYMO.pnpd
[ongoing] com.getdropbox.dropbox.83552
[ongoing] com.google.GoogleDrive.81632
[ongoing] com.macpaw.CleanMyMac3.Menu.80672
[ongoing] com.mcafee.ssm.ScanManager
[ongoing] com.mcafee.virusscan.ssm.ScanFactory
[loading] 420 tasks Apple
[operation] 193 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-04-18)
Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]
DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-04-12)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2010-11-15)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]
SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)
Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)
GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)
SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)
Flash Player (2016-04-15) [Support]
Flip4Mac WMV (2012-05-15) [Support]
Growl (2015-09-16) [Support]
Java (2016-04-18) [Support]
Norton\nQuickMenu (2010-11-16) [Support]
Trusteer Endpoint Protection (2016-04-18) [Support]
Time Machine not configured!
5% WindowServer
1% kernel_task
0% fontd
0% SymDaemon
Top of page process of memory: ⓘ
445 MB kernel_task
Mdworker (18) 430 MB
164 MB Google Reader
Dropbox 123 MB
VShieldScanner (4) 66 MB
106 MB free RAM
4.15 GB used RAM (770 MB cache)
6 MB used Swap
April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash
com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck
28 April 2016, 22:21:42 self-test - spent
April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash
April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash
April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash
April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]
/ System/Library/CoreServices/SubmitDiagInfo
April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang
April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang
April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash
April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]
/ Applications/Airmail 2.app/Contents/MacOS/Airmail 2
26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang
Remove all apps viruses you have
Symantec, McAfee, Norton...
CleanMyMac3
-
A few questions after the downgrade of Win 7 on Satellite U940 - 11L
Hello
friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.
Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.
Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.
Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).
Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.
Please if you have any suggestions we would greatly appriciate it.
On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.
Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.
Thank you very much for your time and your suggestions!
Tony
With regard to the question of the touchpad.
To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers
With regard to the problem of BT.
The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT! -
Satellite L850-Y3110 - Question about the international warranty
I bought a portable Satellite L850-Y3110 in India that has an international warranty.
There is a problem with it now, it's the cd drive is broken and I took it to an authorized to Newcastle service center.Need the driver cd to replace, but now Im says that Toshiba usually give the cause of the part I did not but he to the United Kingdom, and the person told me to go back to the place where I bought and the fix here, I won't go there any time soon, so it's out of the option.
My question is what is the point of the international interest if it won't be such an inconvenience.
When I bought a laptop that I wanted one that would guarantee internationally because Im student out of the country for education, that's why I bought this one because it has international warranty and my laptop is still under warranty international.
What should I do now?
Hello
I m not very well on portable computers sold in India, but cell phones sold in Europe are covered with at least 1 year standard warranty, valid from the date of purchase
http://www.Toshiba.EU/services/standard-warranty/This warranty does not cover repairs in other countries, but in case of hardware malfunction, you must visit the authorized service provider in the country where you made the purchase.
To get the international warranty coverage you must buy an extended international warranty: details here http://www.toshiba.eu/services/warranty-extension/
In the case where the international interest has been registered for your laptop, the ASP to the United Kingdom should be able to repair the laptop in international warranty conditions.
-
Question on the infrared driver for Satellite Pro U400 - 12 p
I downloaded the infrared driver for Satellite Pro U400 - 12 p
When I run the Setup, I get an error that says "the installation of the windows package file is not complete" or something like that.Anyway, he said that the Setup file is in ruins. Tried downloading it several times.
Hope I have posted this question in the right forum.
Thanks for help.When you download the driver to extract it to a folder created on your desktop. From there start the setup.exe file. It should work.
Have you done the same?
Maybe you are looking for
-
How to refresh the playlist on Android app
There is a setting in iTunes/Windows to update the library to the cloud, it sends recent changes, but how do update you the library on the Android app so it pulls down the updates pending in the cloud? I saw him run updates from time to time, but it
-
the problem with your hdx900t. If it is a driver related issue, I can help you with it. need drivers for win 7. .or if it works without?
-
HP Pavilion a320n needs graphics card update.
I need to update the graphics card for my HP the a320n desktop. I need to know about how to proceed and how much it will cost me... and should I even bother? This old compy me has served well with not a glitch during the last 7 years or so, but now,
-
7 c 911689 in module 'ntdll.dll '.
I get a message "Access violation at address 7 911689 in module 'ntdll.dll'. Read of address 00000000 ". How can I fix or eliminate popup to constantly come back?
-
Hola