Question re: G8264 and "DATA".

Similar Questions

• Question: Are there risks or considerations when you rename clusters and data centers?

  Question: Are there risks or considerations when you rename clusters and data centers?

  We have the intention to rename our data centers and groups today to more meaningful names naming conventions. We intend to do so without problem and during production hours.

  Comments, warnings, or known reserves?

  All points will be awarded.

  Thank you

  If you have any scripts or tools that analyze currently based on the name of the Cluster, it could be affected.

• Documents and data - storage leak (bug?)

  Hello

  iPhone 64 GB, ios 9.3.2 6s.

  The question is:

  Documents and data to develop up to 32 GB (what I saw), as seen on iTunes and the phone ran out of free space.

  This happens already months ago, I did not find any application causing it or either messages or e-mail account, I finally had to make full backup and restore via iTunes to purge this unknown space. I thought that behind me, but still, less than months then after full restore documents and data weight approximately 32GB, that's enough, before I restore once again, someone has an idea?

  I tried everything to locate the space of simple storage up to PhoneClean, safeeraser, iFunBox management screen, I have no idea what is causing this problem...

  also tried google the question, found only on the topics related to applications causing, but I already tried to remove all his apps manually one by one, which did not help

  We hope to get some intel.

  Thank you community

  Try to restore as new, not backup your backup is probably damaged. The fact that this has happened two times points to an application or system corruption in the backup. Then download apps you want from scratch. I had to do it myself in the past, unfortunately, no fun, I know.

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• Simultaneous voice and data on Verizon?

  OK, you can now pre-order the phone, and yet I saw no confirmation one way or another as to if the Moto X play supports simultaneous voice and data on Verizon. I tweeted Verizon today and they claim that they do not have the specs of the phone.

  I can't believe anyone, namely, Motorola and Verizon, are able to answer this fundamental question.

  My Moto X (2014) can not STILL can't do, so I am wary to this model as well and rightly.

  Can we please get a definitive answer?

  Yes, you can get simultaneous voice and data on Verizon.

• Clock and date on the lock screen disappears after update to 9.2

  Hi all

  After the update of my 5s Iphone to iOS 9.2, I am not able to display the CLOCK and DATE in my lock screen. Is their any setting I should change?

  Thanks in advance

  Howdy Karthik SJ,

  It seems that the date and time that you would normally see on your lock screen not displayed once you upgrade to iOS 9.2. I would start by quitting the application settings:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  Thank you for using communities of Apple Support, let us know how it goes!

• Historical research Google clears never when I clear the history browser and data

  I have a question that I barely noticed what is happening, it has never been a problem before. If I wanted to erase all of my internet history, (including searches on google), then all I do is go to settings, safari, clear history and data from the Web site, and it would be gone. Or even if I went to the history section on the safari browser whilse and clear of all time, he would go.

  However when I do it now, it still shows google searches!

  It is very annoying because I have to manually clear google searches, that clears only 3 search at a time.

  This AP is an ios issue, because it's never happened before.

  Your Google search history is stored on Google's servers. You should be able to erase by going to www.google.com (this on a computer), login and go to your search history. Access your account, your personal information, the search parameters. Down at the bottom of the page, you will see a "search story" a hyperlink. You can click on that and change your story here.

• motion control for vertical actuator and data acquisition

  Hello

  I am a researcher (a branch of civil engineering) geotechnical engineering and I have very little knowledge about the acquisition of control and data motion, so would need a lot of help from the experts OR. I have only knowledge base on these 2 aspects based on my reading of some materials on the Web site of NOR and youtube videos, so I hope that you bare with me . Here are my questions:

  I am trying to build an actuator which will be used to push a probe (a penetrometer with a load cell to measure the resistance of a soil sample), resembling the concept, photography in the attached file. I need to have these criteria for my system:

  (1) actuator, which can push the probe at speeds between 0.01 mm/s - 300 mm/s with precision and move the probe cyclically (upwards and downwards) in the vertical direction
  (2) load expected on the probe into the ground range: 0.02kN - 6 kN.
  (3) necessary to get the load cell load data and the speed of the probe.

  4) able to control the actuator to a PC (speed and posotion) and monitor data from transducers and data log time even the transducers.

  Guess my beginners is that I will need:

  For orders:
  (1) software - LabVIEW and NOR-motion assistant

  (2) controller - NI PCI-7342

  (3) driver/amplifier - analogue servo AKD Drive

  (4) motor - motor brushless servo AKM

  For the acquisition:
  (1) software - based LabVIEW development systems

  (2) amplifiers or other device - no idea what type on the conditioning of signals

  (3) data acquisition device - no idea what type

  Since I'm a beginner, is - that someone might recommend components (hardware and software) for the control and data acquisition. I'm on a tight budget, so I thankful if someone could help me to recommend components good enough to build my system.

  Thanks for your help.

  At these rates, you will need to run the sensor for the cDAQ.  You can configure the analog output on the Tritex nationally on the position.  There is an adjustable filter that you can set in order to get a clean enough to 300 Hz signal.  When you learn about the Tritex, make sure that let you them know what comms and e/s that you want to use.  If I remember, not all options have worked together.  The analog output may need to be my, but you can put a resistance through the acquisition of input data to get the voltage instead.  I don't remember all the details.  You should really not too much on the Tritex/LabVIEW side.  You will send your movement parameters (beginning of end of race, speed, position, accel, cut), and if you cycle (I believe you) or simply running in a loop.  You could also just be able to use the functions of jog.  When you get close to knowing exaclty what you need, PM me and I'm sure we can work something out with the drivers.  You need only the basics.  In fact, you could probably do this all your movements via digital and analog i/o.

• Z440 - M60 BIOS - time and Date settings

  We can configure the Date and time in the BIOS on a Z440 with worm M60?
  If Yes, where is the option?  Sorry if this is a stupid question.

  I guess I don't think it is preconfigured, but I don't know even how to check the current configuration.

  EskoBomb, BIOS Z840/Z640/Z440 has many changes from previous HP workstations.  The user interface of BIOS F10 is different.  I deleted my previous answer, since it applied to the previous HP workstations.  (Sorry, I misread your original message).

  BIOS Z840/Z640/Z440 has NO settings to change the time and Date.  This generation of workstations doesn't have this option.  The time and date can be set after bootinging, and then edit them in the operating system.

  These BIOS settings are no longer needed.

• My PC clock and date always change when I turn on the PC. How can I get the time to stay the same / correct?

  Hello. Not sure if I have come to the right place with my question. I have Windows XP Home Edition.  My PC clock and date change every time I turn on my PC.  I set the time and date when I turn it on, but then when the PC was interrupted and I next turn to the, (after a period of time) the time and date will be incorrect - a few months and hours.  I have looked for ways to solve this problem, but couldn't find anything.  Any suggestion would be appreciated. Thank you.

  Hi Anti-A,
   
  -Remember to make changes to your computer before this problem started to happen?
  -You are using a laptop or a desktop computer?
   
  Determine if the loss of time is the result of a weak computer battery. Follow these steps to do the same thing:

  a. click Start, point to programsand then click MS-DOS prompt.

  b. at the command prompt, type time and then press ENTER.

  c. compare this time with the time shown by the clock in the taskbar.

  d. Type exit and press ENTER.

  If the computer's time and the time on the clock are different, the computer's battery may be too low for accurate time, and it must be replaced. For more information on how to replace the battery, refer to the documentation that came with your computer.
   
  Follow the steps listed in the article below and check if it helps you fix the problem:
  Windows XP, waste of time

• Smartphones blackBerry how to transfer files and data

  How can you transfwer files and data from memory internal to micro sd card because my internal memory is full, and I don't want to delete things helps!

  Welcme to Frums.

  It is a duplicate.  Looks like you have posted this question within a few hours. Please see your other links I gave.

• time and date do not update automatically

  So I installed windows 8, there is not that long and I notice that my time still stuck after some time and I have to re - sync all the time. This gets really annoying. What can I do to fix this?

  Hi GadyBarak,

  Thanks for posting your question in the Microsoft community forum!
   
  Here are some steps that you can follow
  Method 1:
  Check the status of service time Windows.
  a. the office window, press windows + R
  b. type services.msc in the run window.
  (c) in the services window find 'windows time' and double-click it.
  d. If the service status is stopped, click Start, and then press ok.
   
  Method 2:
  Check if the date and the time zone is set correctly
   
  Try to restart the time service windows and check
  a. click on display time and date in the lower right corner.
  b. Select the internet time tab, and click on change settings and click Update now and press ok.
   
  Method 3:
  Check if the time is set in the Bios from the manual of the computer.

  If you are not comfortable to go to the Woods, contact the manufacturer of the computer

  If you still have questions, contact the manufactutrer from the computer and get the cmos, battery check.

   

  Note: changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  Hope this solves the problem. You can write back us if the problem persists and we will be happy to help you.

   

   

   

   

• In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Please provide ideas to the next question. In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Thank you

  Rick

  Assuming that you are dealing with a PDF file provided by the IRS, you will not be able to e-sign. but you can fill the fields using Adobe Reader or Acrobat. The version of form W-9 that I have does not include a date field, but you can use the feedback tool add text to add a date. You can also digitally sign or use the annotation of pencil tool to draw a signature.

• get guests basic stats and data warehouses

  Hi all

  I am totally new to vcenter and power shell, so please, be gentle on my stupid questions. I'm desperate to compile a script to get the weekly statistics for host, County of vcpu and data store memory space and export it to a csv file. Numbers so very basic for each host computer and the data store. Here's what I have so far based on blogs of the LucD generous. It would be great if someone of you can help me realize what is wrong...

  It took a lot of time for me to understand what are the parameters I need and I'm sure that they are correct, but the syntax is killing me now. Basically, I realize there is something wrong with my variables since nothing is exported to the file you want, but I do not know how to define variables and their attributes. And the error was "impossible to replace the host variable because it is read-only or constant", while other properties such as "name", "mem", etc.

  SE connect-VIServer-server xxx.com - user password xxx-xxxx

  $allhosts = @)

  $hosts = get-VMHost

  $allds = @)

  $datastores = get-DataStore

  {foreach ($vmHost in $hosts)

  $host = "" | Select 'name', 'mem', 'vcpu '.

  $$host.name = $vmHost.Name

  $host.mem = get-Stat-entity ($vmHost) - start (Get-Date). AddDays(-1)-Finish (Get-Date) - MaxSamples 1 - Stat "mem.consumed.average" |  Select - ExpandProperty value

  $host.vcpu = get-VM-location ($vmHost). Where-Object {$_.} PowerState - eq "Receptor"} | Measure-object-property NumCpu-sum |  Select - ExpandProperty sum

  $allhosts += $host

  }

  $allhosts | Export-csv - NoTypeInformation C:\host.csv

  foreach ($dataStore to $datastores |) Where-Object {$_ .name - like "xxxx *"}) {}

  $dsName = $dataStore.Name

  $provspace = get-Stat-entity ($dataStore) - start (Get-Date-time Minute 9 - 0-0 second) - Finish (Get-Date-time-Minute 10 - second 0-0) - IntervalSecs 30000 - Instance "-disk.provisioned.latest stat. Select - ExpandProperty value

  $freespace = $datastores | Select-Object Name, FreeSpaceGB

  }

  $allds | Select DataStorename, provspace, freespace | Export-csv - NoTypeInformation C:\datastore.csv

  Thank you in advance!

  -LX

  Unfortunately, you chose a PowerShell reserved name for the name of the variable.

  The $host variable is not allowed.

  Choose another name and the script should be ok

• Cycle2-Setting jQuery class and data lifecycle...

  Tried several approaches to find the simplest of max-width method and I'm sure there are better that wrap up in another div.

  First use of jQuery, and the question front complicate and hoping something works.

  =======================================================
  

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > Cycle2 TEST PAGE < /title >

  <!--library of jQuery CDN database - >

  " < script src =" https://AJAX.googleapis.com/AJAX/libs/jQuery/1.11.3/jQuery.min.js "> < / script > .

  <! - Cycle2 Plugin Script - >

  " < script src =" http://cdnjs.cloudflare.com/AJAX/libs/jQuery.cycle2/20130409/jQuery.cycle2.min.js "> < / script > .

  < style >

  {.cycle-slide show

  Width: 90%;

  }

  .cycle-slideshow img {}

  Width: 100%;

  height: auto;

  }

  < / style >

  < / head >

  < body >

  <! - begin slide show - >

  < div class = "cycle-slideshow".

  data-cycle-pause-on-hover = "false"

  data-cycle-speed = "500"

  >

  <!--your images go here-->

  "" < img src = "... / images/art/Slide-1.jpg" data-cycle-title = "SLIDE 1" data-cycle-desc "Description" = > "."

  "" < img src = "... / images/art/Slide-2.jpg" data-cycle-title = "SLIDE 2" data-cycle-desc "Description" = > "."

  "" < img src = "... / images/art/Slide-3.jpg" data-cycle-title = "SLIDE 3" data-cycle-desc "Description" = > "."

  "" < img src = "... / images/art/Slide-4.jpg" data-cycle-title = ' SLICE 4 "data-cycle-desc"Description"= >". "

  <! - end slide show - >

  < / div >

  < / body >

  < / html >

  What is?

  .cycle-slideshow img {}

  Max-width: 100%;

  height: auto;

  }

  That said, max-width will not migrate beyond native image file size.  But it will reduce the workforce to adapt to the available window.

  Nancy O.