Question screen Mac Pro 2013

Hi, I was wondering if someone can answer this.  If I add a 3840 x 2160 and a 3440 x 1440 display.  How many other monitors I can add, and what would be the max resolution?

I know I can run 3 x 4 k with a 30 Hz, but I can run 2 to 2560 x 1440, in addition to the above?

Thank you

for the black cylinder Mac Pro, it's six total screens. Up to three can be Hi-dpi.

More than two screens "legacy" uses all the ability to operate "legacy" displayed directly or on simple adapters. All over need adapters that have re-drivers of signal in them, sold as ASSETS adapters. They used to run about $ 40, but a recently reported user get some for MUCH less, so perhaps there is Production of Volume behind some of them finally.

Poster "Legacy" is something other than the Mini-DisplayPort or direct conversion [size] DisplayPort port from which the HDMI if you choose to use it.

Tags: Mac

Similar Questions

  • Samsung U28d590 + Mac Pro 2013

    Hello world.

    I have a Mac Pro 2013 AMD over-pants D300 2048 graphics card.

    I use a Samsung 4 k U28D590 connected via DisplayPort / Thunderbolt, to change 4 k video.

    The display works fine but if I use the maximum resolution (3840 x 2160) all the icons and text looks too small and it is impossible to work.

    I think that, if the Retina displays resolutions higher than my Samsung and icons and the text are a good size for the job, why OS X is not make the same options for scaling using a third party appear? Especially when Apple does not have an external display in 4 k for Mac Pro...

    Does anyone have the same problem?

    Thank you and sorry for my bad English.

    Yes, it is a common problem with the exception of the high-resolution iMac. For those, which Apple also provides the screen, that they have increase the icons and other elements of the OSX system so they ae readable ore.

    Make a suggestion to Apple to implement than for non-Apple screens

    http://www.Apple.com/feedback/MacOSX.html

  • with 10.11.2, Mac Pro 2013 wakes up not 4 k shows up after sleep as before.

    I installed 10.11.2 today and found that the Mac Pro wakes up not 4 screens connected to the thunderbolt ports k. I tried many kinds of 4 k screens, including u28e590d, u24e590d, p2716q etc., but none of them is waking up after sleep. the only resolution is to disconnect and reconnect the thunderbolt (view port) cable a thunderbolt different port.

    these screens all work perfectly with 10.11 and 10.11.1.

    Steps to reproduce:

    1: having a Mac Pro 2013, configurations and install 10.11.2

    2: Connect a screen 4 k as u28e590d to the thunderbolt port, using mini-displayport cable.

    3: let the Mac Pro sleep

    4: when press a key or click the mouse, the Mac Pro will wake up but the screen won't wake up 4 k.

    everyone knows the same problem?

    Hello.

    same problems here :-(

    MacPro 2013 with the D300

    4 k screens: 28e590d Samsung and Asus PA328Q.

    Can someone help? This problem is very annoying!

    Andi, of the Germany.

  • Are there any available for the Mac Pro 2013 SSD expansion?

    Are there any available for the Mac Pro 2013 SSD expansion?

    I would like to increase my 1 or 2 GB of storage internal if possible.

    https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  • Mac pro 2013 is better than 2015

    Mac pro 2013 is better than 2015

    There's not been and of differences in the Mac pro was introduced in late 2013.

    Generally, because of the availability of parts, a newer version will be probably different parts on 2013 old Mac Pro

  • My Mac Pro 2013 will sleep is no longer

    A month or there is my Mac Pro 2013 is no longer sleeps, even if I try to sleep it manually. I have enabled and changed the setting of Sleep/Power Nap in energy-saving.

    I looked at the article Apple and that did not help. I have reset the SMC and booted without failure. I haven't changed any connected equipment or internal. The console log does not help me, but here's the most recent when I sleep manually it. I have bolded the line that started the sleep/low power mode and the line where it was released

    20/05/16 2:00:42.429 PM CommCenter [435]: CSI telling to go to low power.

    20/05/16 2:00:42.429 PM AirPlayUIAgent [588]: 2016-05-20 02:00:42.428658 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

    20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.suggestions.harvest: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 33136 seconds.  Ignorant.

    20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.icloud.fmfd.heartbeat: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 468717 seconds.  Ignorant.

    20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

    20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

    20/05/16 2:00:42.567 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff29d120e10 {name = _NSDoNotDisturbEnabledNotification}

    20/05/16 2:00:42.567 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7ff2327077c0 {name = _NSDoNotDisturbEnabledNotification}

    20/05/16 2:00:42.588 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: NC disabled: NO

    20/05/16 2:00:42.588 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: NC disabled: NO

    20/05/16 2:00:42.588 PM sharingd [469]: 14:00:42.588: purged hashes contact

    20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: discoverable mode changed to Off

    20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: Scan stopped BTLE

    20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

    20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_lock_screen_screenshot: authw 0x7ff54a014c00 (2000) [0, 0, 0, 0] shield 0x7ff54d055c00 (2001), dev [1920,1080]

    20/05/16 2:00:42.598 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

    20/05/16 2:00:42.599 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

    20/05/16 2:00:42.599 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

    20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: DND enabled: YES

    20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: DND enabled: YES

    20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: update enabled: No. (subjects: ())

    ))

    20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: update enabled: No. (subjects: ())

    ))

    20/05/16 2:00:48.000 PM kernel [0]: IOUSBHostHIDDevice@00223000,0 074948.944989: IOUSBHostHIDDevice::interruptRetry: resetting the device due to failures of IO

    20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - fConsecutiveResetCount = 1.

    20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - PortLogging (Disable) = kIOReturnNotReady.

    20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

    20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL SUSPENDED auto operating mode

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() suspension AWDL, enterQuietMode (true)

    20/05/16 2:00:49.000 PM kernel [0]: Airport: RSN full on en2 handshake

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL of SUSPENSION auto operating mode

    20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlAutoMode AWDL recovery

    20/05/16 2:00:49.000 PM kernel [0]: ARPT: 74949.082534: wl0: roamed or channel switching, #0, bssid 48:f8:b3 reason: this: e7:3 c, last RSSI-65

    20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

    20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

    20/05/16 2:00:49.000 PM kernel [0]: changed en2::IO80211Interface:postMessage bssid

    20/05/16 2:00:49.000 PM kernel [0]: AppleUSB20Hub@00220000 074949.251405: AppleUSBHub::deviceRequest: reset because of persistent errors

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing an observer living device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing observer device format < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: remove observer data source for device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removal of observer source of the device data < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

    20/05/16 2:00:52.429 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

    20/05/16 2:00:52.479 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

    20/05/16 2:01:10.304 PM CommCenter [435]: CSI by saying to the low power output.

    20/05/16 2:01:10.308 PM loginwindow [102]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer by observing

    Hello..

    Sorry to hear that your Mac Pro is upward...

    If you have not yet tried, Reset NVRAM on your Mac.

  • Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before installing additional RAM for this Mac Pro (2013). Thank you in advance. David

    Hello, all:

    Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before I add that extra RAM for the empty slots this Mac Pro (2013) that a 2 x 8 is installed.

    Thank you in advance.

    Appleharvest

    Post edited by: AppleHarvest (typo corrected)

    The 4 and 8 GB sticks are not saved while the sticks of 16 and 32 GB are registered. As you seem to know, you can not mix registered and unregistered sticks. For example, you can only add 4 or 8 GB sticks to your present 8 GB sticks

  • Mac Pro 2013 randomly restart problem

    Hello

    Here's my problem: I have a Mac Pro end of 2013 (6 cores, 16 GB ram, over-pants D500, running OS X 10.10.5 with a WACOM Cintiq 21 - UX as my view only) who has, for the last month or so been randomly restart itself.

    There are some days where it might be three or four times and then days where it won't do it at all. Also there are moments where it works well for hours, but then if I turned off the Mac Pro, it will crash and restart. Sometimes it will freeze momentarily application-wise (but the cursor moves but does nothing) before it restarts but usually just the screen goes black and then it restarts without any warning. I still get the black screen with the «your computer has restarted...» Press any key' and of course, it generates a crash report that I submit to Apple every time (that I'll post more recent one below as well.) I did start secure upward, reset the PRAM, booted single-user, just that I found online to do which is recommended. But nothing seems to have done something to help.

    The Cintiq is connected through a DVI adapter to Thunderbolt. I also have Mercury Elite Dual Pro Rack hung RAID normally via Thunderbolt. There are times when I think that there is a problem with the RAID box and the Mac Pro but not sure. As there is a problem with the Thundebolt ports. I tried to pass the cables autour, but it has not seemed to have made all the difference. This also has all seems to have coincided with the last update of OS X where I've also updated the driver for WACOM Cintiq (I since past to the old driver). Is this all just a matter of software conflict?

    I found an Apple Support thread where someone has indicated that a Kernel Panic may cause this, but then it also seems similar to what I've found, that was the issue with the Macbook Pro, which had problems with graphics a bit backward.

    In any case, here's a crash report if it helps and thank you for any help that anyone can send my way!

    Thu Aug 18 02:40:39 2016

    Panic report *.

    panic (cpu 0 0xffffff7f918c0b32 appellant): "ACPI \"PWRD\ "with zero power failure: < rdar://problem/15746463 > ' @/ SourceCache/AppleGraphicsControl/AppleGraphicsContr ol-3.10.25/src/AppleMGPUPowerControl/kext/AMPCPowerManagement.cpp:512»»»

    Backtrace (CPU 0), frame: return address

    0xffffff81fe9dbda0: 0xffffff800f52ae01

    0xffffff81fe9dbe20: 0xffffff7f918c0b32

    0xffffff81fe9dbe70: 0xffffff7f918c0020

    0xffffff81fe9dbec0: 0xffffff7f918be7ad

    0xffffff81fe9dbf10: 0xffffff7f918bed14

    0xffffff81fe9dbf40: 0xffffff800fad394d

    0xffffff81fe9dbf80: 0xffffff800fad3b48

    0xffffff81fe9dbfb0: 0xffffff800f611867

    Extensions of core in backtrace:

    com.apple.driver.AppleMGPUPowerControl (3.10.25) [90 B 87953-018 b - 32E9 - AD83-0526D8E C4749]@0xffffff7f918b8000-> 0xffffff7f918c4fff]

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f918b0000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [CA598036-E22A-3AAE-ABB0-9407B560C5C1] @ 7f8fd24000 0xffffff

    dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f918b5000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f905d0000

    dependency: ffff7f906b2000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8fdfe000

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    14F1909

    Kernel version:

    14.5.0 Darwin kernel version: Thu Jun 16 19:58:21 PDT 2016; root:XNU-2782.50.4~1/RELEASE_X86_64

    Kernel UUID: D11F499F-5895-3D58-9101-5671A93D526D

    Slide kernel: 0x000000000f200000

    Text of core base: 0xffffff800f400000

    Text __HIB base: 0xffffff800f300000

    Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

    Availability of the system in nanoseconds: 9763446529233

    last load kext to 4247477026004: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000 size 20480)

    Finally unloaded kext to 4307635021147: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000, size 16384)

    kexts responsible:

    com.kairos.driver.DuetDisplay 1

    com.apple.driver.AppleRAID 4.0.6

    com Apple.filesystems.autofs 3.0

    com.apple.iokit.SCSITaskUserClient 3.7.5

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AGPM 110.19.6

    com.apple.driver.ApplePlatformEnabler 2.2.0d4

    com.apple.driver.X86PlatformShim 1.0.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

    com.apple.driver.AppleHDA 272.18.3

    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.driver.AppleMCCSControl 1.2.12

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.kext.AMDFramebuffer 1.3.2

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHWAccess 1

    com.apple.AMDRadeonX4000 1.3.2

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    3.10.25 com.apple.driver.AppleMGPUPowerControl

    com.apple.driver.AppleLPC 1.7.3

    com.apple.kext.AMD7000Controller 1.3.2

    com.apple.driver.AppleIntelMCEReporter 107

    com.apple.driver.AppleThunderboltIP 2.0.2

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 36

    com.apple.driver.XsanFilter 404

    com.apple.driver.AppleUSBHub 705.4.2

    com.apple.iokit.IOAHCIBlockStorage 2.7.1

    com.apple.driver.AppleUSBXHCI 710.4.11

    com.apple.iokit.AppleBCM5701Ethernet 10.1.3

    com.apple.driver.AirPort.Brcm4360 930.37.3

    com.apple.driver.AppleAHCIPort 3.1.2

    com.apple.driver.AppleUSBEHCI 705.4.14

    com.apple.driver.AppleACPIButtons 3.1

    com.apple.driver.AppleACPIEC 3.1

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 161

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    com Apple.kext.Triggers 1.0

    com.apple.driver.AppleUSBHIDMouse 185,3

    com.apple.driver.AppleHIDMouse 185,3

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

    com.apple.iokit.IOBDStorageFamily 1.7

    com.apple.iokit.IODVDStorageFamily 1.7.1

    com.apple.iokit.IOCDStorageFamily 1.7.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

    com.apple.iokit.IOUSBMassStorageClass 3.7.2

    com.apple.driver.AppleUSBHIDKeyboard 176,2

    com.apple.driver.AppleHIDKeyboard 176,2

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.DspFuncLib 272.18.3

    com.apple.kext.OSvKernDSPLib 1.15

    com.apple.driver.AppleSMBusController 1.0.13d1

    com.apple.iokit.IOSurface 97.4

    com.apple.iokit.IOAcceleratorFamily2 156,17

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

    com.apple.iokit.IOBluetoothFamily 4.3.6f3

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.iokit.IOUSBUserClient 705.4.0

    com.apple.driver.AppleHDAController 272.18.3

    com.apple.iokit.IOHDAFamily 272.18.3

    com.apple.iokit.IOAudioFamily 203.3

    com.apple.vecLib.kext 1.2.0

    3.10.25 com.apple.driver.AppleGraphicsControl

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.kext.AMDSupport 1.3.2

    3.10.25 com.apple.AppleGraphicsDeviceControl

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.IOPlatformPluginFamily 5.9.1d7

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

    com.apple.iokit.IOUSBHIDDriver 705.4.0

    com.apple.driver.AppleUSBMergeNub 705.4.0

    com.apple.driver.AppleUSBComposite 705.4.9

    com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

    com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

    com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    3.1.7 com.apple.driver.AppleThunderboltNHI

    com.apple.iokit.IOThunderboltFamily 4.2.2

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.iokit.IO80211Family 730.60

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com.apple.iokit.IOAHCIFamily 2.7.5

    com.apple.iokit.IOUSBFamily 720.4.4

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com.apple.driver.AppleEFIRuntime 2.0

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 398

    com.apple.iokit.IOStorageFamily 2.0

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 3.1

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com Apple.KEC.corecrypto 1.0

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    It seems that you have a hardware problem with one or two of the GPU.

    -Make an appointment at an Apple store Genius Bar.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

    Mac Pro graphics problems (end 2013)

    Mac pro end of 2013 freezes with the spinning wheel

  • Mac Pro 2013 become hot, not answer and stop.

    Hello

    I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

    I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

    Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

    I also used for better CPU and GPU thermal compound I found on the market.

    BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

    The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

    Best regards

    Which component was 48 c?

    What was the hottest component?

    It's not hot at all.

    From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

    • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

    Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

    Apple cannot help you because you have disassembled the Mac.

    You already reset the SMC to take part. try resetting NVRAM/MRTP memory

    How to reset the NVRAM on your Mac - Apple Support

  • I want to use Siri on my Mac Pro 2013, but there is no built-in microphone.

    Great so Siri is now activated on your desktop with Sierra. How can I add an Apple flagship computer microphone, the 2013 Pro Mac in a cost-effective manner? It's not even a microphone jack! Help, please!

    Is your Mac has a headphone jack? Then try an Apple headset with a built-in microphone.

    I'm seeing this in the specification tecniques for Mac Pro: http://www.apple.com/mac-pro/specs/

    Audio combined optical digital output/analog line in mini-jack

    headphone 3.5 mm with headset stand

    The Headphone Jack would connect Apple headphones.

    Or use any bargain price USB microphone for speech input.

  • Mac Pro 2013 (3.7 GHz Quad-Core Intel Xeon E5)

    My Mac Pro running El Capitan (10.11.6) and has 12 GB 1866 MHz DDR3 ECC memory.

    Recently, it runs very slowly.  Much slower than my laptop.

    Any suggestions on what is happening and what I can / check?

    Thanks in advance,

    Pedro

    Run and view the results here so that we know more about your configuration.

    http://etrecheck.com/

    EtreCheck

    https://discussions.Apple.com/docs/doc-6172

  • Can't get to the login screen, (Mac pro) password. How can I send it to me?

    Trying to connect my Mac Pro laptop, I'm stuck. Forgotten password. Help, please.

    Assuming that Lion or later reset admin PW by:

    Reset the user password in OS X Lion, Mountain Lion, Mavericks and Yosemite

  • Mac Pro 2013 does not connect to the hard G technology drive

    Hello

    I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

    Best regards

    May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

    The manual

    http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

    Neither the Web site

    ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

    give the voltage of power

    It works via the USB port on your MacBook? The USB part is maybe defective.

  • Mac Pro (2013) will not wake up from sleep after that put 10.11.2 up-to-date

    Problem:

    After that Mac Pro goes to sleep, keyboard and mouse enter don't wake him. Disconnect and reconnect the monitor will not help either. Unplug the monitor wouldn't be helped either. Hotkeys to stop will not help either. (I use Mac since 1986, so I know more tricks). The only thing I can do to start to use my Mac is again holding down the button of physical power for five seconds and make a hard stop.

    Background:

    It is a problem that sometimes in the past. However, it is not reproducible and usually one of the steps above might work, such that unplug the monitor (a Dell 4 K 27 ") of the power supply and then plugging.

    I use physically connected (USB) keyboard and mouse.

    Current state:

    After the 10.11.2 system update last night, my Mac Pro shows this problem every time he sleeps.

    He has already hit a critical delivery photography and currently affects a submission of work for the city.

    This is urgent.

    Other users have reported the same problem after 10.11.2. I've not seen a solution

  • Creative Cloud Desktop App crashes on the new Mac Pro 2013

    After you use the Migration Wizard to move the apps of my MBP 2010 of a new Mac Pro 6.1 (OSX 10.9.1), I find that the designer Cloud Desktop App constantly just crashes after entering my username and password (it is started as a menu point bar or separate window).  I uninstalled and reinstalled several times with the same result.  Here's a partial crashdump (I have the complete list available):

    Process: Creative cloud [541]

    Path: / Applications/Utilities/Adobe Creative Cloud / * / Creative Cloud.app/Contents/MacOS/Creative Cloud

    ID: com.adobe.acc.AdobeCreativeCloud

    Version: 1.4.0.348 (?)

    Code type: X 86 (native)

    Parent process: launchd [159]

    Responsible for: Creative cloud [541]

    User ID: 501

    Date/time: 2014-02-12 09:01:44.196-0500

    OS version: Mac OS X 10.9.1 (B 13, 4116)

    Report Version: 11

    Anonymous UUID: 62963EDC-D8F8-8862-AD7C-BC6179E3E2DC

    Crashed thread: 31

    Exception type: EXC_BREAKPOINT (SIGTRAP)

    Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

    Request for clarification:

    "Reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[NSXMLDocument initWithXMLString:options:error:]: argument zero"

    the problem is caused by 'migration' of your adobe applications rather than install them correctly.

    Uninstall everything that you can run the cleaner and try again correctly installed: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Maybe you are looking for

  • Satellite A110: Cannot order the recovery disk - where to get a

    After some problems with a virus, I need to restart the system.I tried with the Windows operating system from another computer, but the internet does not work, I can't ' install the drivers of wright. Where can I buy the recovery disk? Toshiba suppor

  • 5.1.1 lost on the detection of body and advanced vocation

    I have a Nexus 6 purchased from Motorola using on Verizon. I received the 5.1.1 update LMY47Z. Everything seemed great. Smooth and fast. Battery seemed pretty much the same. I noticed that I had is more advanced calling option. I tried to remove my a

  • shortcuts sometimes disappear

    Sometimes at startup that my games shortcut icons are not displayed on the desktop, so I have to reinstall.

  • How can I recover my old files?

    If my profile has a virus and I deleted it, but before I did I chose to save the files to a different profile. When I went to click on it, the folder was empty, but he says that the folder had files it contains. When I'm on the new profile and tried

  • Switching between users on a computer on a wireless network

    I created several users on one of my computers with a D-Link card. The computer connect to the network wirelessly on the administrator log in only. When I switch to another user, the connection to my home network will and turn off all the seconds. Ho