Question setting baud rate to IMAQ using Camera Link

I have a card PCIe-1433 to link camera, with a camera of Basler. I found that I can put the gain and exposure both directly in the camera with the help of the link series and order series. It works very well. I do this programmatically by using the CLAllSerial.DLL.

Series orders take too long to send in my application because of the default 9600 baud rate, so I was able to send a command to the Basler camera up to its transmission speed, then changing the baud rate of the port com series camera link for the match. The result is that I can quickly talk to the camera. Sweet so far.

However, with the Basler camera and camera link com serial port to the higher transmission speed, I can no longer acquire images using imgXXX IMAQ commands. I get a time-out of orders series IMAQ must use to control the camera for Imaging. Essentially the IMAQ driver does not know the baud rate change. I don't see how I can tell the IMAQ driver what output baud rate to use. Also, NEITHER MAX becomes unusable in this situation.

How can I, via the IMAQ driver, increase the speed of transmission of orders series to the camera via the connection of the camera?

See you soon,.

Wayne

So, I thought this close and post the solution. To increase the speed of transmission of communications series through camera link, you must:

-Use the NI Camera File Generator to change the file of the camera (or simply edit it directly, since it is the text file).

-Run NI MAX and connect to the camera using the new camera file. MAX will not be able to talk to the camera at the moment, because the speed of camera has not yet been changed.

-In your application, first set the link rate 9600 series, so you can talk to the camera. Now change the baud rate in the camera itself, using all save changes, etc., are necessary for the camera, you are connected to. Finally, change the speed of link series to baud rate selected in the file of the camera. (It goes without saying that the serial link baud rate and baud rate camera must match).

Now, both the driver AND AND the camera are according to the new baud rate. You can exit the application and allows to access your camera... until you turn off the camera... how he NI MAX (at least the Basler I use) restores baud rate 9600. Works great!

See you soon,.

Wayne

Tags: NI Hardware

Similar Questions

  • Setting baud rate to the Max with OpenComConfig.

    I want to connect to a motor controller (Newport Conex CC) using the serial port, but it takes baudrate 921600, however, the maximum value allowed baudrate in OpenComConfig() is only 256 000. Is there a way around it.

    Also, I tried HyperTerminal and everything works fine with the baudrate 921600

    I can say that the viSetAttribute depending on the VISA library works up to 921600 transfer speeds, I have not tried with OpenComConfig.

    But others have, as you can see here: you can use higher rates as long the driver itself (provided by the manufacturer of your hardware to port) support non-standard transfer speeds; the limit referred by you is only a limited selection of presets of the Service Commission.

  • Windows 7 computer to dial the connection problem with baud rate setting do not stay together

    I've set the com port [converter usb to serial com cable 5] setting baud rate to 115200

    I set up the adjustment [communication between 2 computers cable] modem baud to 115200

    In the center of network share, I create a new network connection [set up a dial-up connection]

    When I check the properties of the dial-up Modem connection set to 19200

    I can't change to 115200 - but the connection is attempted to 19200, so it fails

    All solutions?

    Hello Stephen,

    Thank you for visiting the Microsoft Community Forum.

    According to the description, I understand you are trying to reset the baud rate for your dial-up connection. You tried to change the BAUD rate in your login from 19200 to 115200, but the connection attempt is made at 19200 and if it fails every time.

    I suggest you to check with your ISP (Internet Service Provider), if they have their own custom settings saved using an application that controls the baud rate.

    You can also view the following Microsoft help articles.

    SerialPort.baudrate, property

    http://msdn.Microsoft.com/en-us/library/cc561279.aspx

    SerialPort.BaudRate enumeration.

    http://msdn.Microsoft.com/en-us/library/cc561279.aspx

    Hope this information is useful. Please write us back for any further assistance.

  • Camera Link or USB3

    I have a vision system using a color camera and frame grabber (1410).  As the future of cards near his end, prepare for obsolecense I think camera Camera Link or USB3-migrate.  I used the Camera Advisor and did not see an option USB3.  USB3 has the bandwidth and is less expensive than the Camera Link but I don't want to have to deal with the writing of my own vision of calls to acquire images of the USB3 camera or change the settings.  I want to be able to use MAX to do preliminary tests / troubleshooting the device.  I had problems with not being USB2 devices is not 100% compatible with the drivers OR so I worry about the USB3.  My question is should I just go with Camera Link or I'll be able to easily use the USB3 with LabVIEW?

    You don't need to use the Camera Advisor to see if compatibility exists with USB 3.0. You just need to make sure that your camera is USB3 consistent Vision. Also note that comparing Camera Link with USB3 may not be the best. I see the USB3 compete more with the GigE interface. Camera Link interface can give you with bandwidths up to 850 MB/s and USB3 can give up to 400 Mbps with GigE around 125 MB/s. The USB3 plug-and-play functionality is very similar to GigE.

    NOR-IMAQdx, part of the Vision Acquisition Software driver package, supports USB 3.0 compatible USB3 Vision devices so you should be OK, using software products from National Instruments (including MAX) to interface with your device. Remember that USB 2.0 devices was a different story. With which National Instrumetns took only supported these devices with a DirectShow interface.

    In addition, suppliers of vision and camera announced USB3 only last fall. So there still some time before USB 3 becomes most used in the industry. Basler has just published the cameras Ace USB 3.0 , but they will be available in Q2.

    If you don't need the benefits of Camera Link and USB3 fills your specifications, my recommendation is to go with USB3.

  • Camera Link image, line, data valid bit locations

    Hi all

    (see also http://forums.ni.com/t5/Machine-Vision/How-can-I-know-if-the-PCIe-1433-sees-a-Frame-Valid/td-p/31769...)

    I'm trying to re-design code FPGA vendor to change a camera of 4 x 12 Medium to Full 8 x 8.

    The Camera Link standard is quite confusing. The way I read it, a Camera Link of 8 x 8 Full camera should affect the valid as follows:

    LVAL: bit 24 on three channels

    FVAL: bit 25 of the three channels

    DVAL: bit 26 on three channels

    For some reason, the provider asigned them like this (and IT WORKS!):

    LVAL: bit 18 on three channels

    FVAL: bit 19 in all three channels

    DVAL: bit 20 of three channels

    There is another format that corresponds to the valid Bit arrangement? If so, is there something in the Camera File Generator and. Files of CIM which defines the format?

    See you soon!

    Crazy

    Crazy,

    Yes, you are right the LVAL, FVAL and DVAL are on TX/RX24, 25 and 26 respectively.  These assignments of bits match with parallel interfaces on Channel Link Serializer/Deserializer chips.  The PCIe-1433 expect that framing signals are mapped to the signals to the camera.

    Not all cameras output a signal DVAL, so they can be ignored in the acquisition card (PCIe-1433) with a camera file parameter.  In addition, the polarity of the signals framing can be reversed with a camera file affecting as well.

    You may be interested in using Camera Link Logger with the PCIe-1433 to receive signals from the camera.   Camera link Analyzer will present the traffic camera link in a format easy to read Visual format that can help your development and debugging.

    http://www.NI.com/product-documentation/14301/en/

    Regards, Jeff

  • Setting of baud rate with CVI runtime for Linux

    Hello people,

    I have a problem regarding the setting of baud rate with the CVI for Linux runtime.

    I want to communicate with a device that has a USB-to-serial of FTDI chip. The driver for this device is already included in the kernel (openSUSE 11.1, 2.6.27.23 - 0.1 - default i686 kernel).

    I can use a terminal program (HTerm 0.8.1beta) to open the serial port at/dev/ttyUSB0 and can set all baudrates, the unit supports (38400, 115200, 921600) and communication works perfectly.

    Now I take the example of series of NEITHER and go under Windows. I developed to support 921600 baud, and it works very well. So I try to run this example on Linux (I've expanded in order to open/dev/ttyUSB0), but it only works for 38400 baud. If I try to put 115200 or 921600 baud, then I get error RS232-14 (invalid baud rate).

    It would be nice if there is someone who can give me a suggestion what I need to do to get the job to 921600 baud.

    Best regards

    Martin

    Hi NickB,

    the patch done!

    Thank you very much.

    Best regards

    Martin

  • Definition of FD CAN baud rate gives the error (using samples of C)

    I use C for XNET "FD CAN Frame Input Stream" samples where I put the valid values of "nxPropSession_IntfCanFdBaudRate" between 1000000-8000000. (according to http://www.ni.com/pdf/manuals/372840k.pdf#page=983)

    I am getting following error

    NOR-XNET status: NOR-XNET: baud rate (Hex 0x3FF63040) The FD CAN you provided is beyond the capability of the manufacturer of the specified transmitter/receiver. In our internal testing, we found this baud rate to run, but bus errors may be detected or generated during communication. See the Presentation of the material NOR-XNET CAN section in the software and manual equipment OR XNET for more information.

    I have a loop back configuration with a PCI card with 2 ports.

    It is a warning and not an error to inform you that you may be exceeding the capacity of the physical hardware. While the FD CAN protocol supports very fast transfer speeds, none of the manufacturers transcevier still created talkies that they ensure that all transfer speeds. Talk to them, the number one problem was do an EMC low enough to run in the vehicles. They tend to be actually able to follow the signaling rate.

    Therefore, we allow you to use NOR-XNET to communicate to a wide range of transmission speeds, but sound you the alarm if you are exceeding the rates allowed by the manufacturer. For most use cases, this can be ignored safetly.

    FYI, what baud rate you try to run to?

  • Pl2303 parameters Baud rate.

    How can I set the BAUD rate of my PL2303 based USB with the serial cable with 910 600 in XP - SP3?

    The chip is supposed to be capable of this, but in the control panel offered the most I see is 128 000 BPS.
    I have a few versions of the pilot, both with the same question.
    If I understand correctly, driver speeds are contained in an editable text file, but I don't know the name of the file to edit.

    Different devices use this chip, and the manufacturers claim rates above 1 MB.
    So I guess it's possible, and I have to make some adjustments in my system.
    Any help would be appreciated.

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on MSDN. Please post your question in the below link:

    http://social.msdn.Microsoft.com/forums/en-us/WDK/threads

  • the value node id and baud rate by lss (CANOpen)

    Hello

    for a research project, we try to use 2 volume CAN flow sensors (http://www.hydrotechnik.com/english/QT106_DSEN.pdf) . For use in our network CAN I first set up the node id and the baudrate of each of them. The manufacturer told me to do it via the put layer Service (LSS). (How) I can do using Labview?

    I can use one of the following cards, NEITHER CAN: NI PCI-CAN/2 and NOR-PCI-8512.

    Thanks for the tips.

    Greetings,

    Thomas

    Unfortunately, none of your interfaces are compatible with CANopen. You will need a PCI-8531.

    The flow rate in baud rate and node id can be configured easily with the library OR industrial for CANopen communication .

  • sbRIO-9651: FPGA RS-485 baud rate 230400 beyond? Error-1073807330

    I use a sbRIO-9651 and drop the CLIP of FPGA in "Other devices" it shows six Serial1 serial ports... Serial6. The first four are described as "RS-232 serial Port" and the two last "RS-485 Serial Port".  On Serial6 (RS-485), I have configured the TX, RX and TX pins activate.

    In my .vi on real time, I put my "VISA set up a Serial Port (Instr) .vi" with a baud rate. A works 115200 or 230400 baud rate, but the pace I want to use (256000) generates a run-time error.  "Error-1073807330 VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource."

    I suspect the FPGA hardware is capable of 256 Kbps, but I know that if it is a fundamental limitation of the NI UART IP block, or some places I have to change to allow a wide range of transmission speeds (?)

    Hello

    The maximum rate for these serial ports is 230 400 bps, so there is a limitation on the connection of the UART.  In the manual, you will find more specific information if you need it!  http://www.NI.com/PDF/manuals/376962c.PDF#page=8

  • Fallacious rectangles or "glitch" appear when using Camera Raw.

    When I use Camera Raw, I see fake or rectangles 'glitch' appear when using various tools of exposure, the adjustment brush setting, etc.. To work around the problem, I set a tool that I use as an exhibition or a brush until the rectangles disappear, then try to accomplish my initial task. Although annoying and disruptive to work, the question so far seems innocuous from a real perspective of corruption.

    The question goes far (stops going completely) when I uncheck the box "use Graphics Processor' Raw.

    My guess is that it is a matter of driver/GPU. If someone knows something about this, would be great to hear, otherwise I just wanted to share the info in case someone else has the same problem arise.

    Note, I have a relatively new Intel 970M, latest drivers and a lot of memory... This isn't an 'old system' or lack of memory type of question.

    Here's an example of what I see (red arrows point to the issue but are not themselves part of the question):

    Problem goes away when I uncheck the following...

    Some info sys...

    NVIDIA GeForce GTX 970 M 372.54 driver version.

    Adobe Photoshop Version: 2015.5.1 20160722.r.156 2016/07 / 22:23:00:00 CL 1083377 x 64

    Camera Raw 9.6.1.631

    Operating system: Windows 64-bit 10

    System architecture: Intel CPU Family: 6, model: 14

    Physical processor count: 4

    Number of logical processors: 8

    Processor speed: 2712 MHz

    Built-in memory: 49110 MB

    Free memory: 25204 MB

    You have your answer. That's what a lot of people have had to do when their graphics card does not work well with the cab. No solution other than what you were doing.

  • Can't use Camera Raw in LightRoom 4

    Below is a long dialogue that I just had with the Technical Support via Chat on access to Camera Raw directly from LightRoom 4.  The end result is that it cannot be done.  LightRoom 4 has its own section of the "Develop" and if you try to "change in: PhotoShop 6" RAW image will bypass Camera Raw and open directly in PhotoShop.»  Something that I was surprised and frustrated by.  I thought for sure I was missing somehting.

    I do not recommend buying LightRoom other than a way to "organize" our images.  I just use Bridgne and am able to open a Raw Canon "CR2" file directly in Camera Raw, and then after my settings directly in PhotoShop.  LightRoom has no layers, paths and channels, and a host of other wonderful adjustment / manipulation capabilities not found in LightRoom.

    So, if you're like me and you want to use Camera Raw before moving to PhotoShop then LightRoom won't succeed you.  I spent a lot of time thinking I must be missing something and then I contacted the Support by Chat and we went through change in %AppData%, which only leads to losing me all my preferences in PhotoShop!  A total waste of technician time and mine.

    I share the bottom of chat with you only to show you the ridiculous amount of time lost when the answer remains the same: YOU cannot ACCESS CAMERA RAW DIRECTLY ON LIGHTROOM 4

    Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute (s) and 3 second (s) or more because there is 1 client (s) online in front of you.

    You are chatting with 'Gabby' now

    Nicole: Hello. Welcome to the Adobe Support.

    Nicole: Hi Fred!

    Fred: Hi there my friend. I try to use Lightroom 4, but frankly, am not happy with the way it handles RAW files.

    Fred: I can't open a RAW of Canon ".cr2" file directly in Camera Raw from LightRoom.

    Nicole: I received your request. I would like to please a moment to check your account and review the details of your request.

    Fred: Thank you. Also, I went through all the information I can find in the Menu "help" while up. Can't find a thing on LightRoom 4. I don't have this problem with Lightroom 3

    Fred: The RAW file that it references is "DNG".

    Nicole: I understand that you are unable to get a glimpse of cr2 raw images in Lightroom 4, I'm correct?

    Fred: No, I can listen to samples, but when I want to open the only choice that I gave is CS6. I can't open it in Camera Raw and he makes things a completely different and inappropriate to NIK Software plug.

    Nicole: Thank you for the confirmation.

    Fred: I know that I can change that in the 'preferences' in Lightroom 4 but I can not find Camera Raw to select choice.

    Nicole: I'll be happy to help you with this.

    Nicole: can I have the serial number of the product please?

    Fred: I just checked again and it is set to a plugin from NIK Software as an external software to open the file.

    Fred: Yes, I would like to get it for you.

    Fred: Lightroom version: 4.1 [829322] OS: Windows 7 Business Edition Version: 6.1 architecture application [7601]: x 64 system architecture: x 64 physical processor count: 2 CPU speed: 2.1 GHz built-in memory: 8123,8 MB real memory for Lightroom: 8123,8 MB of real memory used by Lightroom: Mo 1687,3 (20.7%) Virtual Memory used by Lightroom: MB 1657,0 cache memory size: System 1194,5 MB DPI setting: 96 DPI desktop composition enabled: yes display: 1) folder Application 1360 x 768: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.1 library path: C:\Users\FT\Pictures\Lightroom\Lightroom 4 Catalog.lrcat settings folder: C:\Users\FT\AppData\Roaming\Adobe\Lightroom adapter #1 : seller: device 8086: subsystem 2a 42: 145110cf revision: 7 video memory: 32 AudioDeviceIOBlockSize: 1024 AudioDeviceName: speakers (2 - USB Audio) AudioDeviceNumberOfChannels: AudioDeviceSampleRate 2: Build 44100: 6.0x552 Direct2DEnabled: false GL_ALPHA_BITS: 8 GL_BLUE_BITS: 8 GL_GREEN_BITS: 8 GL_MAX_3D_TEXTURE_SIZE: GL_MAX_TEXTURE_SIZE 128: 4096 GL_MAX_TEXTURE_UNITS: 8 GL_MAX_VIEWPORT_DIMS: GL_RED_BITS 4096,4096 : GL_RENDERER 8: Mobile Intel (r) 4 Series Express Chipset Family GL_SHADING_LANGUAGE_VERSION: 1,20 - Intel version 8.15.10.1883 GL_VENDOR: Intel GL_VERSION: 2.1.0 - Build 8.15.10.1883 OGLEnabled: true OGLPresent: true GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_ GL_EXT_texture3D EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_separate_specular_color GL_ARB_multitexture GL_EXT_texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_ texture_filter_anisotropic GL_ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_ env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture_rectangle GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_ GL_ARB_fragment_program GL_ARB_vertex_program occlusion_query GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_pixel_buffer_object GL_WIN_swap_hint GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_ GL_EXT_texture_sRGB GL_EXT_framebuffer_object texture_float GL_NV_conditional_render GL_EXT_texture_swizzle

    Fred: Just for a second. No serial number is given in the information system.

    Nicole: I'm sorry to inform you that the serial number will be not available in your system.

    Nicole: Fred, I find the serial number in your Adobe account.

    Fred: Lightroom version: 4.1 [829322] OS: Windows 7 Business Edition Version: 6.1 architecture application [7601]: x 64 system architecture: x 64 physical processor count: 2 CPU speed: 2.1 GHz built-in memory: 8123,8 MB real memory for Lightroom: 8123,8 MB of real memory used by Lightroom: Mo 1687,3 (20.7%) Virtual Memory used by Lightroom: MB 1657,0 cache memory size: System 1194,5 MB DPI setting: 96 DPI desktop composition enabled: yes display: 1) folder Application 1360 x 768: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.1 library path: C:\Users\FT\Pictures\Lightroom\Lightroom 4 Catalog.lrcat settings folder: C:\Users\FT\AppData\Roaming\Adobe\Lightroom adapter #1 : seller: device 8086: subsystem 2a 42: 145110cf revision: 7 video memory: 32 AudioDeviceIOBlockSize: 1024 AudioDeviceName: speakers (2 - USB Audio) AudioDeviceNumberOfChannels: AudioDeviceSampleRate 2: Build 44100: 6.0x552 Direct2DEnabled: false GL_ALPHA_BITS: 8 GL_BLUE_BITS: 8 GL_GREEN_BITS: 8 GL_MAX_3D_TEXTURE_SIZE: GL_MAX_TEXTURE_SIZE 128: 4096 GL_MAX_TEXTURE_UNITS: 8 GL_MAX_VIEWPORT_DIMS: GL_RED_BITS 4096,4096 : GL_RENDERER 8: Mobile Intel (r) 4 Series Express Chipset Family GL_SHADING_LANGUAGE_VERSION: 1,20 - Intel version 8.15.10.1883 GL_VENDOR: Intel GL_VERSION: 2.1.0 - Build 8.15.10.1883 OGLEnabled: true OGLPresent: true GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_ GL_EXT_texture3D EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_separate_specular_color GL_ARB_multitexture GL_EXT_texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_ texture_filter_anisotropic GL_ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_ env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture_rectangle GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_ GL_ARB_fragment_program GL_ARB_vertex_program occlusion_query GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_pixel_buffer_object GL_WIN_swap_hint GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_ GL_EXT_texture_sRGB GL_EXT_framebuffer_object texture_float GL_NV_conditional_render GL_EXT_texture_swizzle

    Fred: OK, how can I easily bloody for you serial number?

    Nicole: Fred, I find the serial number in your Adobe account.

    Nicole: Once you connect to the Adobe account, click on 'My products' under the 'My products and services'.

    Nicole: You can locate the serial number that you have saved.

    Fred: OK, if you don't need now. He is not in a format that I can copy and paste.

    Fred: 116040070815784336099081

    Nicole: Since it was registered in your Adobe account, we can get the information from there.

    Nicole: Thank you for the serial number.

    Nicole: Fred, I wish to inform you that all believed change options, you will get in Lightroom Develop module.

    Fred: I hope that I copied it correctly, it is presented so small.

    Fred: OK, just a second.

    Fred: So, I go to "Develop" it will open in Camera Raw 7.01?

    Fred: Frankly, it's the reason why I was just using the bridge is due to the apparently lack of coherent link between 4 LightRoom and PhotoShop CS6.

    Nicole: I would like to inform you that you won't have the plug-ins for Lightroom camera gross. Given that Lightroom will not require a camera raw converter.

    Fred: At least I can open in Camera Raw and make the necessary adjustments and it will load in Photoshop.

    Fred: OK, so why when open a 'RAW' out of LightRoom image to go directly to the CS6 bypassing Camera Raw?

    Fred: Not allowing all the wonderful adaptation toos, particularly new in Camera Raw. I don't understand the disconnect.

    Nicole: Fred, do I know what product you're talking like 'CS6'?

    Fred: If I wanted to treat all of my images in LightRoom I would have not wasted my money on CS6. That makes sense?

    Fred: PhotoShop CS6

    Fred: Or PhotoShop 6 extended

    Nicole: Thank you for the information.

    Fred: Still, the question remains "why LightRoom 4 only recongize the DNG files and no other RAW file put in shape and not allow them to be opened in Camera Raw?"

    Fred: I'm not in a position to process my images in LightRoom 4. So, I want to identify and sort them. I want to process of Canon RAW files in Camera Raw and then move to PhotoShop Extended 6

    Fred: So what you tell me, is that I can't open a RAW file in LightRoom in Camera Raw. In simple terms.

    Nicole: Fred, I can understand your concern. Lightroom will not require a camera raw converter.

    Nicole: Can I have the name of the camera model you are talking about?

    Fred: Two camera models: EOS 5 d Mark II and EOS 60 d

    Nicole: Please so that I can check further and try to solve your problem.

    Nicole: . Thanks for the information.

    Fred: Both are listed as being supported by Adobe PhotoShop and Camera Raw. I found in my research.

    Nicole: Okay.

    Nicole: Please close all Adobe applications.

    Fred: I just want to go to LightRoom 4 directly to Camera Raw 7.01 and then 6 of PhotoShop Extended. Seems pretty simple and logical to me. Here again, I am not Adobe.

    Fred: All right, just a moment and I'll do it.

    Nicole: Click Start.

    Nicole: Fred, do I know what operating system you use?

    Fred: I'm working on Windows 7 64 bit OS.

    Fred: I closed all applications Adobe.

    Nicole: Thank you for the information.

    Nicole: Click Start.

    Nicole: Just type %appdata%\microsoft\windows\sendto in the search box and press the Enter key.

    Fred: Ok, Im pretty computer savy so just tell me where you're going.

    Nicole: Double click on the folder Adobe.

    Fred: Done

    Nicole: In this folder, you will have a record CameraRaw. Please rename the folder as CameraRawold.

    Fred: Done

    Nicole: In this folder, you will have a folder Adobe Photoshop CS6. Please rename the file as Adobe Photoshop CS6old

    Nicole: After you rename images, please close the page and try to open a raw file and let me know the exact result.

    Fred: Done

    Fred: Just a moment. I've renamed CameraRawold and Adobe6Old. I'll browse my external drive and click on a RAW file

    Nicole: Okay.

    Nicole: Let me know the status.

    Fred: Is the PhotoShop Extended opening 6

    Fred: can I change the properties of the file to open in another program, if that's where we're going.

    Fred: He also created an error which stated that he acknowledged a graphic software that is not completely supported and PhotoShop won't open normally.

    Fred: A little more time it opened in Camera Raw.

    Nicole: Fred, once more step you must realize that you got an error about graphics software.

    Nicole: Please try to work on the Camera Raw and let me know it works very well or not.

    Fred: And I have lost my presets.

    Fred: OK, where does that leave us?

    Fred: Regarding LightRoom 4?

    Nicole: Fred, you wanted to open raw images in camera raw in option instead of Photoshop CS6, right?

    Fred: Camera Raw seems to be well functiong.

    Nicole: Great!

    Nicole: Please close any Adobe application.

    Nicole: Re launch Photoshop and type CTRL + K.

    Nicole: Let me know once you're done.

    Fred: Check "CR2" off the dafault Canon files to open is with PhotoShop 6

    Fred: Ok, let me close them.

    Fred: OK, closed sir.

    Nicole: Please go to the performance tab.

    Fred: 'Tab performance' in what program?

    Nicole: Re launch Photoshop and type CTRL + K

    Nicole: A new window will appear "Préférence"

    Fred: Just for a second, it's opening. Thank you for help.

    Fred: I am now in the preferences box. Performance tab

    Nicole: You're welcome.

    Nicole: Correct.

    Fred: OK, I'm in the preferences

    Nicole: Please let me know graphics processor use is checked or unchecked.

    Fred: It is checked. I know that on this machine that the graphics processor is not fully supported due to lack of a separte video card

    Nicole: Okay. Please check once readers of chart are updated or not.

    Nicole: Fred, I hope that now you are able to open raw images in camera raw, you were talking about?

    Fred: Just for a second. Driver software is up-to-date.

    Fred: Let me open LightRoom 4 and see where it goes. Just a second.

    Nicole: Sure.

    Fred: Lightroom takes a long time to open now.

    Fred: Now I get the message that it does not.

    Fred: OK, it finally opened its doors. Just a second.

    Nicole: Okay.

    Nicole: Please let me know the result.

    Fred: In the room light when I select "Edit in PhotoShop 6" it goes straight to Photoshop 6 and not opening not Camera Raw. Yet.

    Fred: So, my friend. We are still in the initial question, and now I have to reload all my preferences lost due to the change in AppData. LOL!

    Fred: I guess I can organize all I Ant in LightRoom and always use Bridge to edit and work on my images.

    Fred: Sorry! Organize everything I want and still edit off bridge.

    Nicole: Fred, I'm sorry to inform you that when you open images from Lightroom it will require not the raw camera and also when you try to open the images in other software from Lightroom it will open directly in this software. Since Lightroom itself works as a camera raw in develop module.

    Nicole: However the other question, you had about open images in Camera raw when you try to open raw file is resolved, right?

    Fred: What a waste of money from my point of view. You lose the use of all of the 'RAW' data manipulation that is less destructive in Camera RAW then go directly in PhotoShop Extended 6 and manipulate what you need to do and save as a TIFF format or other.

    Fred: Waste of money Lightroom is

    Fred: I could always open the file directly in Camera Raw in Windows Explorer or bridge. That was never a problem.

    Fred: The problem is with LightRoom.

    Fred: I don

    Fred: I will not change my images in LightRoom.

    Nicole: I apologise for the inconvenience. 

    Nicole: Fred, I'm sorry to inform you that you are unable to open images in camera via Lightroom raw mode.

    Fred: In LightRoom where are layers? The path? The channels? Where, if it please tell me why Adobe develop and sell LightRoom 4 or any product that has not benefited from the more sophisticated and refined choices given to you in Camera Raw and PhotoShop 6!

    Fred: LightRoom is a waste of money, unless you want to use it for that, so organize your images. Total waste! I'm really ticked thereon.

    Fred: It's a waste of my money, my time and effort to accomplish something that cannot be done from LightRoom.

    Fred: Correct! It does not use Camera Raw in LightRoom 4. I simply don't understand why we lost all this time brought changes to AppData requiring now I go back and undo the changes or reload all my preferences for PhotoShop 6

    Nicole: I apologize for the inconvenience.

    Fred: Tell me. Am I correct or am I missing something here?

    Fred: You've been very patient, very polite and searched on the question in depth than to have no result. You simply can not Camera Raw from LightRoom. End of discussion.

    Fred: I appreciate your sincere effort on my behalf and realize this isn't your fault. So, thanks to a sincere effort help me.

    Nicole: I'm sorry to inform you that Lightroom is a product where Camera raw will not require, it will preview the images as the ins plug in camera raw are under construction.

    Nicole: You're welcome.

    Fred: It would have saved you and me a lot of waste of time and effort to assert that you can't get Camera raw from LightRoom.

    Nicole: Fred, it was really nice talking with you.

    Nicole: Thank you contact Adobe. Good Bye.

    Thank you for chatting with us. Please click on the 'Close' button in the top right of the chat window to tell us how we did today.

    You are not currently connected to a representative of cat.

    The develop module IS Camera Raw. Each control in ACR is identical in the develop module. ACR in Photoshop, at the base, is no longer necessary to interpret the adjustments in Lightroom. If you want to open the file in ACR, in Lightroom, choose Edit in Photoshop as a smart object. When you do this, you can double-click on the background layer to go to Camera Raw if you need to make further adjustments. I have not read your conversation, but from your description of your frustration it seems to me that you don't quite understand the relationship between Lightroom and Photoshop/ACR.

  • OR PXI-8513/2 custom baud rate

    Hello

    I need a 667 k baud rate.  XNET database editor and Bus monitor only give options of 500 k and 800 k.

    Is there a way to specify baud rate 667000?

    Thank you

    Rates has worked?

    I have attached the VI that I used. It was something that I wrote for my own use, so he was not really polite to consumption. I had a few versions of this over the years, and I have no readily available material, so I can't guarantee that it produces the correct results. You must post probably travel to match the manual.

    To use it, you want to watch sample Max/Min points to fit your bus needs. For the CAN, this number is generally in the 1980s, but it could vary based on the length of the cable, etc.

    You can also watch the allowed error constant. He is currently 0.6, you can increase to be a little more tolerant. There are not many options at higher baud rates, 666667's about this for rates around here. You might consider making it a control to make it more accessible.

    If you find something like this useful, you can add a suggestion to the team to incorporate it, or something like that.

  • Acquisition of images using PCI-1426 and Camera Link Camera

    Hello

    I am writing a program to capture images of a Camera Link camera via the PCI 1426 acquisition card in LabVIEW. The problem that I am facing is that I am unable to find the correct controls in the functions palette to start the image capture. Could someone tell me please how much control I'm supposed to use?

    I've worked on similar request sometimes back, I used IEEE 1394 camera, so once I found the correct block diagram controls I should be able to go from there.

    Thanks in advance,

    Sandeep

    Hello Kristen,

    Thanks for the suggestion. I was able to solve this problem. I think that was what was causing the problem I have LabVIEW 8.6 installed on my system and he had the Vision Acquisition System (VAS) 8.5.1. But, once I installed VAS 8.6 I saw the IMAQ in the functions palette.

    I'm guessing that LabVIEW 8.6 does not recognize the toolboxes of previous versions.

    Sandeep

  • How can I transfer size images using camera connect? I make it smaller

    I connect my t6s to my smartphone using camera to connect.  I can see the images on the camera very well but when I upload them on the phone, they are resized 1920 X 1280.  I would like to be able to transfer the enlarged image but cannot find any setting to do so.  The device itself gives me an option for full or resized when sending to the web service as a gateway to Canon but no parameter is apparent for the connection of smartphone.

    Hi windycityart!

    Thanks for posting.

    The camera Connect app doesn't have the ability to transfer the RAW or companies full images.  Images that are transferred are resized.  To download full-size images, this should be done using the EOS Utility software on a computer.

Maybe you are looking for

  • How to recall a message deleted

    read a message by accident, I clicked on the "delete" = delete. How can I read this message?

  • Booting from an external HHD

    I have an i5 3.2 GHz 27 "iMac Intel, 32 GB of memory with 1 TB HD running OS10.11.3, would I win anything by booting from a 240 GB HHD in El Capitan?

  • my lap top says device not found Boot please install an operating system on your hard drive

    I was on yahoo and page froze. I hit ctrl/alt/del and nothing happened. Then, I hit ctrl/esc. I now have a screen saying device not found Boot. Please install an operating system on your hard drive. hard drive (3FO) what hurts? It is a Compaq presari

  • CLIQ 2.1 lock screen

    I find it hard to get used to the new lock screen. I'm used to press home and menu that I pick up the phone, without looking at the keys. so when I look at it, it is unlocked and ready to go. I guess I'll have to get used to looking at my screen and

  • How to permanently delete pictures on the iPhone 6 s more

    Hi all I have one that the issue of date clear on iPhone. Hope someone could help me with that. Context: I bought an iPhone 6 more a month and found out it is too big for me and not otherwise convenient in some circumstances.  And I ordered a 6 s App