Question T460s to home

Similar Questions

• Photosmart Pro B8850 questions - Windows 7 Home Premium 64-bit

  Photosmart Pro B8850 - worked fine with Vista 64-bit!

  With Windows 7 Home Premium 64-Bit, prints get hung in the print queue.  Diagnosis HP suggests bad USB connection or level ink cartiridges low - neither of which are correct or appropriate.

  The 'later' drivers are installed - BUT given their dates seem to be several years old?

  Best of cases, I can get that one image printed before my $500 printer hangs up.  In the end, I am unable to print anything

  H E L P

  Uninstall / reinstall seems to have solved my problem!

  T H A N K S

• Questions of Vista Home Premium

  I have a few questions: my fan is in high speed at the start up.  This happens sporadically and is accompanied by a black screen.  My computer freezes randomly (pilot "updates" are on) and is slow to start.  I'm not particularly computer smart, so profane would work well.  I would like to have all the answers.

  Thank you very much!
  Elda

  Hello

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

   

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 3: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Hope this information helps.

• Questions backup Vista Home Basic

  1. I have read that this version of Windows is not back up the operating system and applications. However, when I did the initial backup of the c. drive yesterday, the possibility to do exactly that was "disabled" by default. In addition, the resulting backup used roughly 28 GB and I have only 18 GB of personal files. If this 28-GB figure does not include the operating system and applications, which explains its size?

  2 are compressed backups? I am inclined to think, there are 68 GB on the C drive, the backup file is 28 GB and backup took 2 hours, but I want to be sure.

  3. utility backup of home Basic does not include a planning capability. Task Scheduler can launch an application as a backup on a schedule, but it will not actually run the application. Y at - it a solution (for example, a script) that will allow me to perform backups automatically? Failure to do so can anyone recommend a 3 rd-party solution?

  Many features of Windows Vista are the features of Windows 7 and Windows XP.  In my view, that Diane has listed links information for Windows Vista.  Number of documents have been migrated to Windows 7 links.

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Put your mind at ease

  Back up your files now

  By default, all file types are selected, including pictures, music, videos, email messages, documents, TV shows, compressed files and all other types of files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-your-mind-at-ease-back-up-your-files-now

• Question about Call-Home

  Omniscient contributors!

  I call home configuration on our system, and I see that we need installation profiles. I inherited this system and the default profile is configured, and it seems to have only the alert 'Normal' group are entrusted to him. According to the literature, it seems to me that only the authorized system information are sent. Can anyone confirm this? If I seek only to see the material and environmental issues (thermal, failures of memory/PSU) which groups of alerts can I set up?

  Thank you

  Joe

  There are two parameters involved here:

  Level of field

  Flaws in Cisco's UCS that are greater or equal to this level will raise the profile. This can be one of the following:

  Criticism

  Debugging

  Disaster

  Fatal

  Main

  Minor

  Normal

  Notification

  Warning

  Groups of alerts field

  The group or groups which are alerted based on this profile Call Home. This can be one or more of the following:

  Cisco TAC

  Diagnosis

  Environment

  Inventory

  License

  Life cycle

  Line card

  Supervisor

  Syslog port

  System

  Test

  If you want to just receive material and the environment, verify that the group "environmental" alert.

  If you select normal, you will get Minor, Major and so on.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101100.html#d85763e1667a1635

  This guide is intended UCSM 2.0, but you can get the version of the guide that you are running.

• Redirect to desktop and Mobile and questions of the home page, please let know us

  Hi all

  I'm having some problems with the mobile version of a Web page, and I'm unable to test it without using emulators mobile online that I don't have an iThing or a mobile phone with net access myself.

  It comes to the Web page , I'm working on.

  Question 1.

  Essentially in Muse I built a desktop versions and a cell phone; It downloads via FTP to Muse on 'pocketbooknutrition.com/public_html', and indeed there is a folder "/ public_html/phone" now. Grabbing my web address with "... / phone" or "... / phone/index.html" will load it properly on my desktop, so the mobile version is here, but none of the emulators online mobile redirect on the main page. What I read Muse must generate the redirect itself, coding and under file > properties of the Site, the option to redirect office is indeed turned on. But I can't work on why it won't.

  I tried to work around the problem, that I could not diagnose, and I found the following code which needs to redirect when added to the header of the main page, but that doesn't work either.

  < script language = javascript >

  <!--

  If ((navigator.userAgent.match(/iPhone/i)). (navigator.userAgent.match(/iPod/i))) {

  location.replace ("http://pocketbooknutrition.com/phone");

  }

  ->

  < /script >

  So can someone explain how to make so that it can redirect it please?

  Question 2.

  The friend I am Web page for fixing wants him to be able to be added to the homescreen on an iThing too, which she has, but its test reports are often truncated because of the distraction; I like that this page will add an icon I downloaded for it when the option is selected, but she says that the icon does not work as a shortcut... I think so?  But I don't see a way to set up, all the details online are for the addition of the icon only. And I have absolutely no way to test the emulators online do not have this feature.  How I would approach this by Muse please?

  Question 3.

  She wants it to start in the alignment of the landscape; but from what I see, Muse guess vertically and is expected to design it this way and let the scaling to the individual phone. I have no prior experience today design for phones, therefore this standard web design for smaller screens, a limitation of the Muse, or I can force it to start in landscape mode?

  Thank you!

  I suggest you make contact with your webhost about the files does not work as expected, I checked on my end and the url link to the files you mentioned shows not the script or style files.

  Thank you

  Sanjit

• How can I get rid of the media support is outdated question on the home page that appears each time you open Firefox?

  Everytime I open Firefox there is a window that says "media player is out of date" and won't let me not go further until I close the window, and then reopen Firefox. When I try to update, it says that it does not work for Mac.

  Please do NOT install this suggested MediaPlayer. This message is caused by an extension that I recommend withdrawal, following these steps:

  Please try to disable all non-essential or unrecognized extensions on page modules. Either:

  • CMD + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then deal a critical look at the list on the right and, when in doubt, turn off (or delete). Especially if you find something called MediaPlayer. Keep in mind that all extensions are optional and none is included with Firefox when you get it first.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  That get rid of messages?

• A question on the home page

  How can I change my homepage to the company that I work? I don't want a new MSN as my homepage. Thank you.

  In IE: Tools | Internet options. The first item on the general tab.

• Network questions and caused by the Apple TV 4

  My apologies for the long post...

  I bought a new Apple TV 4 this week an upgrade to ATV3. The main reason for this is to get proper access to my subscription of Apple's music on my living room AV setup - it would have been nice to get just a small update on the ATV3 to work well with Apple music!

  In any case, the addition of this innocuous little device seems to have caused all sorts of questions about my home network.

  I have connected the ATV4 using ethernet to my Virgin Super Hub, made the simple configuration via iPad and has proceeded to explore - everything seemed fine. Even downloaded the speedtest excluding interest and who reported a healthy 90 + MB. Made the usual check for updates and this 9.0.1 installed.

  First of all, we noticed the following aspects with the ATV itself:

  1. During the operation, she would bring "no network connection.
  2. By looking at the network settings it shows connected Ethernet but had lost it's previously that would deal with DHCP and DNS details
  3. It does not recover
  4. Just physically remove the cable disconnected and reconnected would force it to find an address - done interesting a different each time. Other devices on the network tend to have the same address (as is usually the behavior, I expect), but he may then lose later
  5. In addition, when it is connected to the speed sometimes fall causing stuttering/buffering of the same Apple music / local libraries
  6. If the ATV4 is awakened from his "sleep" he also still not address
  7. I removed the Ethernet and tried the same thing with Wi - Fi - it presents a similar loss of address - so I conclude its not related to the transport

  I did the usual restart/re-Multi-Power of router, switches and access points - I have an Apple Time Machine (in switch mode + providing a WiFi access point second across the House), over a gigabit 8 ports switch with the Virgin cable router. In no case a network complicated and so far I've had NO problems with the internal network - before the addition of ATV4 we had several wired (Macs, PS4, PS3, Smart TV, home automation) and wireless (ATV3, Blu - ray, another PS3, MacBook, iPads, iPhones, etc.) ANY abnormal behavior of customers well. But still the problem persisted. I had to leave the investigation, but left the ATV on and connected via ethernet.

  Now, here's the next interesting issue. My son said that it could not connect to the WiFI network with his iPhone 6. The phone would see the ads these two WiFi networks, but on the selection or just would not get an address never (even with reboots, restorations, etc.), to the point where he thought the phone had a problem with the hardware (also proposed by the Apple Support). Other devices seemed (at this time) to connect OK, even more reboots to network equipment does not solve this problem. So iPad (already OK) my wife had the same symptoms. A little Google and look on this site of the updated support various complaints about the networks ATV4, slow speeds, etc. - and including an addition can cause the ATV4 hitting on questions to other devices that you try to use the same network. So I turned off the ATV4 and ' hey presto' the phone that don't would not connect worked immediately, iPad & other devices connect and can access the internet + LAN in quick as they did previously.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's all very boring, because I also bought a second ATV4 as a Christmas gift for one of my sons. Is it really £300 + in the sewers?

  The other people in this community, see some or all of these questions? Permanently or intermittently? Has anyone received all responses support who can help me? I will of course follow up with Apple myself.

  Now, of course, this probably isn't a big problem for everyone (otherwise this forum would be full of only those complaints), but I can only conclude that the Apple TV 4 (9.0.1) is at fault. If I just keep the same and pop my old ATV3 instead I get NO such problems.

  That's right, that is not a problem for the vast majority of users, in fact I'll go far as to say that I only saw one or two messages with 'Similar' issues. May I suggest you try in another place (maybe a friends or preferably to an Apple store), I'm inclined to think you will find it works perfectly, if it isn't taking it back for a replacement.

• Missing functionality of Windows Home Server 2011 Add-Ins

  I just installed WHS 2011 RC and it's great... BUT I can't get any Add-Ins working.

  I installed a couple of them, and they appear in the list of the Add-In, but not in the title. (Or watch the Launchpad for Office Add-In section.

  Hello StefEBear,

  There is a separate forum for posting questions about Windows Home Server.
  Click on the link below for the forum for Windows Home Server.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They have experts on Windows Home Server that will be better able to answer your questions.

  Sincerely,

• Windows xp home/remote desktop capabilities.

  Hello who ever at microsoft of right. I have several computers in use around the House and learn more about the features and the robot of them every day the last project is networking with microsoft prouducts such as windows live Messenger and remote desktop. I was trying to install the Remote Desktop feature windows on windows xp family for the last two days, as I was doing research on technical specifications for this task, I came across information that revealed to me that remote desktop will not work on windows xp family I found it hard to believe that the designer of windows XP Home Edition doesn't have to see the need and or the desire for a husband/wife. teenage girl/teenager son incorporate the office function remotely in windows xp family only provided in windows xp professional. My question is XP Home Edition designers to see this after the fact and need somewhere in the downloads windows provided the software needed to integrate this feature because it can be very useful in helping in other remote sites.

  Unfortunately, remote desktop can be used to access a computer of the publishing house.  But, you can use remote desktop to access a computer running XP Professional.  There is no room for this download for the home edition.  The only way would be to upgrade to XP Professional ortrick your computer into thinking that it is professional , which may or may not work.  Do this at your own risk.  I suggests that you do not try.  Then, you can download Remote Desktop fromhere .

• Compatibility XP home and domain

  Hello. I am a new admin server and I have a few questions on XP home and areas. I hope this is the right place to ask. I realize that XP Home Edition cannot be a client of the field, but I also read that XP Home Edition can have roaming profiles and can access the domain shares. I'll set up a domain controller with SAMBA for a food pantry (my budget is $ 0.00 with donated equipment), I can't go to a MS Server real or even XP pro. In any case, one of the boxes that will be a member of the domain is a box to XP Home, and I want the users to have to load their profile and network share when they use the machine. Is there anyway that I can do under XP home? I'd love to be able to manage under the strategy of group as well, but looks like it is out of the question.

  Just some information so that you can understand what I am trying to accomplish here. Right now, the pantry from the kitchen has a few computers that Manager no matter which allows to use. At least one of the machines stores sensitive information about all customers and anyone has access to this machine. I want to pass this information to a server and that some people access give it. I would also like to be able to define strategies for machines so people must have an account to use the computers and I can restrict the permissions for certain groups. I have also had problems with computers being changed without my knowledge and then disappear all the parameters that I added all of a sudden and I wonder to find files that have not been migrated, etc.. With a domain name, I have to be consulted before the new machines are added and if I get group policy to work properly, then a new computer just needs to get a copy of the policy and it is ready to go without me having to be there physically. Anyway, I have a job and a connected machine test server setup and works very well. I fell on the anomaly when I realized that one of the machines (in fact the machine that needs backup and the restriction most) is a XP Home machine and I don't know if there is a good way to achieve my goals with it. Thanks in advance.

  Hello

  Maybe this can help, http://www.chicagotech.net/winxphome.htm#Can%20XP%20HE%20join%20a%20domain%20and%20access%20the%20network%20resources

  ----------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Home page of Twitter does not

  I am from India using all-in-one HP 18 - 1101ix desktop PC

  I just have a question. Twitter home page does not load on my computer. All other sites work fine. I did everything, including system restore.

  Is someone can you please tell me how I can solve this problem?

  Hi Noble22, sorry to hear you have questions to Twitter. I was wondering if you had the blocker enabled on your browser?  If you use Internet Explorer as your primary browser you, here's an easy way to disable the blocker.  Click on the Tools option in the upper right of Internet explore and go next to the pop-up Blocker. The moves and you will see Disable blocker and select it to disable it.

  I hope this helps the issue.

  Thank you.

• Recovery of Windows Home Server Software with a 64 bit Vista computer

  I have a 64-bit office panoramas and cell phones.  I had problems with my HP EX470 and had to do a system recovery.  Now the software disk does not allow me to reinstall the software on my desktop.

  When the original program and the network was created, we had the required 32-bit computer.  But now are not.  Is there a software updated?  I can not access the server and would like to access my files.

  I tried connecting server... but because I did a cover of course passwords do not work. and I don't know if there is a default password.

  I have a 64-bit office panoramas and cell phones.  I had problems with my HP EX470 and had to do a system recovery.  Now the software disk does not allow me to reinstall the software on my desktop.

  When the original program and the network was created, we had the required 32-bit computer.  But now are not.  Is there a software updated?  I can not access the server and want to access my file.

  I tried logging on to the server... but because I did a cover of course passwords do not work. and I don't know if there is a default password.

  Hello

  I don't know what you're trying to make, about whether you have a problem, reinstall Vista, or not.

  But for questions on Windows Home Server there are specific Microsoft Forums for these questions:

  http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• Customization of the Home tab

  I use 11.1.1.6 ADF and JHeadstart 11.1.1.4 and I would like to add content in the tab home JHS-generated, more precisely a dashboard with a few tables, a graph and a URL data control.
  
  Should I leave JHS generate on the Home tab, manually add the dashboard and the content in Jdev and then customize the homepage of velocity model somehow to keep the dashboard?
  
  Or should I stop the generation of the Home tab (such as referred to in the question of Application home page and build my own tab?) With this approach, I guess I would need to create another tab among the modules of application even I used for the other tabs.
  
  In both cases, is it possible to use the JHS generator to specify and produce content in a dashboard? The chart in the tutorial example invokes using an overflow area that doesn't seem appropriate when I don't need the associated table.
  
  He mentions in the JHS tutorial, "+ Note that you can easily customize this homepage +"... but then gives me no clue as to how...
  
  Thank you
  David

  David,

  Just off the coast of the generation of the homepage as explained in the post of your refrerred to.
  You don't need to create another tab, the Home tab is always generated, only the content will be generated is no longer.

  JHS could help generate content of dashboard, but that all depends on the type of content you want to put in the dashboard.
  For example, you can create a page of a dashboard that contains 4 workflow as a region, these workflows can be built using JHeadstart, and then you drag and drop on you af:panelDashBoard - showDetailItem.

  Steven Davelaar,
  JHeadstart team.