Questions about the discs of recovery and partitioning Satellite A200-QH0

Similar Questions

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Question about the guest of dashboard and column

  My question about the dashboard and column prompt:
  
  
  (1) prompt dashboard usually work with only for columns that are in the topic area. In my report, I have created some of the columns that are based on other columns. As I have the daysNumber column that is based on two other columns, because it calculates the difference between two dates. I can't find this column invites when I create dashboard. I need to make a guest on this column.
  
  (2) to one of the column, I have only two values 1 and 0. When I create a prompt for this column, is possible that falling of drop down it displays 'Yes' of 1 0 and 'No' and always filter the request?

  Hello...

  I forgot to tell you one thing... but performance wise... If you create the column in RPD itself, it is good and easy to maintain.
  If you want this feature also... once again you choose directly the column in the area of topic... ;)

  Thank you & best regards
  Kishore Guggilla

• Question about creating discs of recovery on the new desktop

  you just bought a 8 hp pav p7.1003wb office gig / 1 TB hard drive. Windows 7-64 bit, that I will need to make recovery disks because they are no longer included.

  should I have separate recovery of my regular backup discs? and what is better to use ie., cdr - rw, flash drive, and it should be 1 TB? I have a 16 GB flash stick that I currently keep my personal files. I looked at a few external drives too and just confused myself as to what I need. Currently, I got for my old desktop (a gateway 2001) which came with recovery disks and then I would back up all the files that I had to keep on my flash stick.

  I'm sorry I'm a little computer illiterate, and I can't follow the rapid technological change and hope someone can explain to me on my level... Thank you!

  hanj454,

  Part 1, the medis recovery was a very simple question:http://support.hp.com/us-en/document/c01867124

  Please be advised that it is not on DVD + R media. Shouldn't RW.

  Part2, backup: you can keep it as simple with copies on important files flash drive.

• Question about the use of recovery disks Vista Bus on T500 with XP Pro downgraded

  I searched to see if this has been addressed already and I don't see anything about it. I also looked through the Lenovo support site and could not find any documentation with specific information, that I'm looking. So, if all goes well, the people here will have an idea.

  I have a T500 which was ordered with retired on WinXP Pro. It also came with a set of Vista Business (four discs) recovery disks. I plan to get my machine with Vista business records and down XP Pro, but I had a few questions.

  1. as it currently stands, I guess that the R & R partition that is on the HARD drive at this time restoring a WinXP Pro system if I start and get back with her. Is this correct?

  2. If I boot from the recovery disc Vista Business and use it for the recovery of the system, it creates a new partition 'Factory' R & R which would incorporate a Vista Business install?

  I may be wrong on my assumptions and even after the start of the R & R partition, it is really the recovery disks that I choose to use that would dictate if I found myself with a XP or Vista Bus. System.

  For what it's worth, I created a set of recovery disc R & R for the installation of WinXP Pro in case I need to revert to this version.

  I hope that my question is logical and that someone out there has an answer for me.

  Thanks in advance!

  jskang, welcome to the forum,

  Yes on both counts.

  Removal of all the hard drive recovery disks, create the service partition and then the system installs from the recovery with the flavor of windows partition, so that the discs are.

  It was a good idea to create the XP discs.

• Questions about the record HDD Recovery - Satellite L350D

  Hello everyone!

  I have a Satellite L350D with Windows Vista.
  I'm in my mind to reinstall.
  All my data from the two partitions are saved with the exception of a folder on my drive E Data "HDDRecovery" who shouldn't be modyfied or deleted, or whatever.

  I wonder if all the data are removed from the hard disk due to formatting, how does appear that this same folder HDDRecovery remains safe on the hard drive?
  Or is that the hard drive is not really formatted and data on my hard drive are always safe and hidden?

  Thank you for answers!

  Hello

  I'll try to explain how it works.

  Original Toshiba designed for your laptop recovery image is recorded on the second partition in the file called HDDRecovery. This image should be used if you want to install OS and have the original state factory.

  For this installation, you can use this recovery image of the second partition or by using the recovery DVD. It is recommended to everyone to create this recovery DVDs. Have you created?

  If you use recovery DVD the whole HARD disk will be formatted and all data stored thereon will be removed.
  If you start the HARD drive recovery process only C partition is removed. This folder HDDRecovery is important if you only want to use HARD drive recovery facility. When you want to use the DVD only you can remove (I do not recommend you to do).

  I hope I could help a little, but if you have any other questions please let us know.

• Some additional questions about the creation of recovery disks

  HP Clubhouse 17 laptop laptop 17-e040us

  Wireless connection

  Disks creating information that I downloaded from the HP website, he States "If you are prompted for an administrator password, type the password confirmation or providide.

  How to create an administrator password?  The only areas where I created passwords on the laptop are the Login Screen/signature to the PC, Mirosoft account and a Description of the computers.   How can I give confirmation?

  Disconnected from the internet.  After the login screen and go to the start menu, I'm not connected to the internet.  Fix?

  Do I have to disconnect external equipment of the laptop before you create recovery discs?

  During the process of creating, if it has stop or, a message that something is wrong, what should I do?

  Thank you.

  You're not likely to be asked for Admin password unless you use a user account created with Limited permissions such as we would be put in place for another user on their machine. Some people share a machine with children, adolescents and setup one account limited for them.

  I never really worried about to disconnect Internet-just don't have Internet Explorer or Email app open and active on the internet. You could always disable the wireless I guess. Usually the F12 key in the top row turns stylized / disable tapping. White = light it.

  If you have a problem... just after this problem if the Recovery Manager gives no details of what you need to do about it. You can always phone HP and request a recovery media if the process fails for you.

  Just try to stop worrying and thinking that it. Go ahead!

• Questions about the discs

  Hi all

  I have 4 quick questions for you:

  (1) from what I understand when you install Operations Manager vCenter, you enter in the data store that will be the location of the installation.

  This data store is then automatically used as a repository for all data collected.

  Is it possible to configure the appliance with a separate data store to store data, separate from the OS device files or what a data store for everything?

  (2) a customer asks if we use Thin Provisioning for the disk where we installed vCenter Server Operations Manager.

  I have read that it is not recommended but I have reason to think that the only bad thing about this is that, if you are installing on a thin disk put in service, there is the risk that you could install the other virtual machines on the same data store and use that Bishop Op disc space it should develop in the future?

  It is more than one scenario/warning "you could do it but be very careful," i.e.?

  I ask because the logic unit number where they want to install will be used only for the device, no other virtual machines.

  (3) is there a recommended maximum size of the data store for this device or is everything what need you?

  I ask because VMware has mentioned that, for the amount of data we wanted to collect, we would need approx. 1.8 to disk space.

  IF we were to install thick provisioning, is there any problem installing the unit on a store of data that big?

  (4) responses to these 3 questions - this changes with the version of vCenter operating i.e. v1.0.1 and v5.0?

  Any comments?

  Thanks in advance

  Mark

  (1) from what I understand when you install Operations Manager vCenter, you enter in the data store that will be the location of the installation.

  This data store is then automatically used as a repository for all data collected.

  Is it possible to configure the appliance with a separate data store to store data, separate from the OS device files or what a data store for everything?

  You could SvMotion disc 2 on the VMS to another database if you want to provide separation.  What is your reasoning to achieve?

  (2) a customer asks if we use Thin Provisioning for the disk where we installed vCenter Server Operations Manager.

  I have read that it is not recommended but I have reason to think that the only bad thing about this is that, if you are installing on a thin disk put in service, there is the risk that you could install the other virtual machines on the same data store and use that Bishop Op disc space it should develop in the future?

  It is not recommended for performance reasons.  Virtual disks add data quickly during the first months of operation and a thin provisioned VMDK would be constantly growing.  There is a decline in write performance when a thin provisioned disk should allocate more space.  This is the rationale for recommending eager thick discs.  Overprovisioning is another concern, as you said.

  (3) is there a recommended maximum size of the data store for this device or is everything what need you?

  I ask because VMware has mentioned that, for the amount of data we wanted to collect, we would need approx. 1.8 to disk space.

  IF we were to install thick provisioning, is there any problem installing the unit on a store of data that big?

  VMDK can go up to 2 TB (-512 bytes if someone wants to be picky) in size and you may have many.  I think that the file system dimensionnera up to 16 TB max (based on ext3 and 4 k blocks).  I usually advise to stick to the recommendations of dimensioning of the documentation and monitoring of free space.

  (4) responses to these 3 questions - this changes with the version of vCenter operating i.e. v1.0.1 and v5.0?

  Yes, especially to question 3 - you expand the 2 existing hard drive in 1.0.1 rather than add another vmdk in 5.0.

• Re: Question about the Toshiba HDD Recovery tool

  Hello
  Quick question: if I burn a disc of recovery using 'Toshiba recovey media creator', if it burns a picture of the current state of the computer or if it burns an image of the HARD drive restorations (means a clean image)?
  I have a recovery disk in drive D but I want a backup on dvd disc.

  Thank you!

  Hello

  Not sure, I didn't create Toshiba Recovery disk, but I think it burns an image of HARD drive recovery. But I don't know, if you use a software, Acronis true image, you can burn the image to the current state of the computer.

• Questions about the synchronization between output and analog input

  Hi all

  I now have a simple task which head a signal voltage (from PXI ao0) on a circuit and then your comments a voltage at the terminals of a component, for example, that one of the resistors in the circuit, through ai0 on PXI. So in this case, the synchronization between analog input and analog output must be made to avoid error of phase shift.

  I tried to build my VI by learning this example: https://decibel.ni.com/content/docs/DOC-3882

  However I have a few questions.

  1. I noticed that there is a merged error fed the "start task" sub VI for the analog output.  What is the point of fusion to mistake?

  2. I enclose my VI (also shown below) for the output voltage. I put my writing of DAQmx Subvi in the while loop so that I can change the voltage while the VI is running.

  

  However, in the example, the author has been reading outside of the loop and before even the start task. What difference will it make?

  3. I have also attached my synchronized VI. I always put the wavegeneration and the DAQmxwrite in the loop. A bulging guard error saying about samples is not available and needs to a higher sampling rate or a longer wait time. What causes this?

  I appreciate that these problems can be solved. Thanks to you all.

  (1) first you need start the task of acquiring, he'll wait for trigger here. And then you start the build task that provides this trigger. If acquisition could trigger and never start.

  (3) you must first write something in the buffer (writing DAQmx), then only you can generate it (Daqmx Start).

  Check Cont Gen tension Wfm - Int Clk - no Regeneration.vi in the help-> examples for example.

• Question about the browser inside "sandboxie" and download to save an attachment?

  Hello

  I am very new to sandboxie. So please excuse my ignorance.

  I have the browser open inside sandboxie where I'm going to my gmail. I have an email from my son with a photo attachment. I have no trouble to consider this picture.

  However, I just found out that I couldn't save this picture on my computer HD. In sanboxie E-mail when I chose to save it in a folder in my computer HD shows like saved but when I close the browser and open my folder where I saved the photo allegedly - I can't find anything...

  So I guess that's the protection offered by sandiboxie?.  So if I need to save items of all reliable e-mails, I open my browser off sandiboxie to run my download?

  Concerning

  Snow,

  Yes, one of the goals of Sandboxie is to keep isolated... things so that, if you have accidentally downloaded a virus, he would be stuck in the sandbox [rather than infect your real system].

  Right-click on Sandboxie icon in your system tray, select Show THE WINDOW, the sandbox SAND SANBOX SETTINGS tab, DEFAULT ZONE.   On the left, click on the + sign of RECOVERY, to develop to reveal a QUICK RECOVERY.   You should see several locations of files listed there... perhaps including DOWNLOADS, DOCUMENTS, FAVORITES, or DESKTOP (even though I think some of your own peut be different).    You can add other folders of your choice.   These 'Fast food' files indicate the main areas where you want THAT Sandboxie really save files on your drive.

  It is spirit, back to your email address and see if you can direct download of your photo accessory in one of these files in particular.   When you do, you should see a popup of Sandboxie, indicating that the file is eligible for recovery, which means that it can be moved out of (side) of the sandbox.   I said in general to recover in the same folder (on my real system, as it was tyring to save in the sandbox).   And click on the RECOVER button.   If get you there, it should do the trick.

  There may be other ways to do it... but this method works for me.

  Also (now that you know where are the settings), there should be a setting to ask you to empty the sandbox when you exit the program... and it should also let you know that you have lingering there files which will be lost if saved.

  EDIT: actually, I just closed my browser sanboxed, not through QUICK-picked UP a file... and I get a screen to DELETE the CONTENTS of Sandboxie, again reminding me that I can still get the file [or well, delete the content of the Sandbox].   Certainly, it's been a while since I have set up the program, so I don't remember if it was a default option, or something I've tweaked.

  Edit2: There is a short tutorial for using Sandboxie http://www.sandboxie.com/index.php?GettingStarted , which if you have the time, elaborates on this (in parts 4 and 5 of the tutorial).

• question about the scope of variables and memory

  I searched the Adobe documentation for an overview, but apparently, I'm not in the right place.

  Here is an example of simplified code:

  < AS >

  loadedImages:Array = new Array();

  function createImageData(imageNumber:Number):void
  {
  var imageData:BitmapData = new BitmapData (width, height);
  
  Switch (imageNumber)
  {
  case 1:
  imageData.draw (loader1.content);
  loadedImages [imageNumber] = imageData;
  break;
  
  case 2:
  imageData.draw (loader2.content);
  loadedImages [imageNumber] = imageData;
  break;
  }
  }

  < virtue >

  ImageData defined inside the function createImageData(), I know that I can not access any outside level of the function block.  But what about memory?  ImageData still exist once the code has "left" the createImageData() function?

  For example, if the function above is called twice (once with imageNumber = 1, once with imageNumber = 2), what I remember?

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and 1 BitmapData object named imageData

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and 2 BitmapData named imageData objects

  -BitmapData objects stored in loadedImages [1] and loadedImages [2] and nothing else

  Is there a way to see the 'elements' in memory, not just the quantity?

  If you call twice createImageData, for imageNumber = 1 and imageNumber = 2, there will be only 2 persistent objects to the Bitmap in memory, and they will be made by the loadedImages table. The imageData variable is just the first to receive the pointer to the allocated memory and past him on the elements of the array until it's life is over. Only when you delete the table, you will release the objects for the GC.

• Questions about the standard wireless keyboard and mouse on a h8 - 1360 t.

  Hi again,

  I have a h8 - 1360t with the standard wireless keyboard and mouse.

  1. where is information on the blue buttons 'connect' keyboard and mouse?

  2. the mouse has a power switch - do I really have to close each time, or is there a function of inactivity when the system is off?

  3 lets say that I have two exact systems within 5 feet of each other. Will the two keyboards and mouse conflict?

  Looking forward to your answers.

  Thank you

  BJ

  This document will show you how to sync mouse wireless and keyboard if they connect buttons.

  You don't need to turn off the wireless mouse. If you have problems with the batteries run out frequently, it might be useful, but I've never needed to do.

  Two different sets of wireless mice/keyboards are not usually a problem. If there is a conflict, go through the process of connection of each game.

• Question about the formula of Member and BegBalance

  I have a requirement where I need to calculate the value of '' suffering '' and need to save it somewhere so that I can use it to display on the dataforms.
  
  The logic of the last value Due must be--
  
  Suffering = year previous year Total + current (Jan: Prior month)
  
  I was planning to write a formula for this member. Can I use substitution variables, as title, etc. PriorMonth in the form of Member to achieve this?
  
  In addition, since we do not use BegBalance Member for purposes like the display on the dataform etc. can I use for this requirement where I can write the formula of the BegBalance member and give it an alias name 'Suffering' I can use to show on the dataforms. Is this possible?
  
  Please let me know. All entries are appreciated.
  ~ Hervé

  Hello
  Perhaps it should look like this:
  & priorYr-> YearTotal+@sum(jan:&currMonth);
  / * No need to specify the current year as it would be fixed in pov, column or page. If necessary, replace the sum with @sumrange(&currYr,jan:&currMonth) * /.

  See you soon,.
  Alp

• Questions about the clean Win 8 instalation on Satellite U840 - 10 M

  Hello

  I'll do a clean install of win8 in my laptop. However, I want to ask 2 things:

  1 - is the SRS Sound driver available for 8?

  2. for purposes of formatting, I know I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?

  2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?

  2.2 disk - other partitions I'll delete and create new ones for win8.

  2.3 SSD - do I need to configure anything for Cache SSD? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.

  Thank you

  > 1 - is the SRS Sound driver available for 8?
  Hmm have you visited the page of the Toshiba UE driver and checked this?
  I found this driver: [SRS Sound Driver 1.12.5000 Win 8 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 42 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 84611 & OSI D = 42 & driverLanguage = 13]

  > 2 - for formatting of the purpose, I know that I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?

  You can add the Intel RAID driver in case the HARD drive wouldn't show. Read this
  http://APS2.toshiba-tro.de/KB0/TSB2903E20000R01.htm

  > 2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?
  Recovery image does not work after installing Win 8. Then create recovery disk before installing Win 8

  > 2.2 HDD - other partitions I'll delete and create new ones for win8.
  You choose the partition where the Windows 8 would be installed. Check above document.

  > 2.3 SSD - do I need to configure anything for SSD Cache? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.

  I think that you don t need to configure anything during the installation of Win 8.