Questions after the hard drive recovery. No longer can run backups or disk defragmentation.

Similar Questions

• Where could I find, live disc or other to restore the HARD drive recovery partition?

  Hello I have an A300 system 9 1M unit.

  I need to restore the HARD drive recovery partition, I had to change the hard disk drive, because he's dead.

  Is there a link where I could download the files? IMG to ISO or any other program that can create a new partition for recovery on a new drive?

  This computer is not under warranty, because it has more than 4 years.

  Thank you for all the support you could give me

  SEB

  PS: second question: which little hard drive disk could I buy for this model? Wich, 2 1/2 hdd and sata connector? IDE? I do not know.

  Post edited by: Seaone

  Hello, I have another question, how do I recognize the type of connector of the drive in this laptop?

  It's a sata II or sata 3.0 compatible?

• How to free space on the hard drive recovery disk?

  My J: drive (recovery) is near capacity after a reinstall of Windows 7. How to clear space on this drive?

  Hi John R H,
   
  The purpose of the training of recovery is to store all the files needed to do disaster recovery, when the system becomes unstable. The recovery disk is actually a partition on the hard drive of your computer - not a real physical disk. There is much less space than other drives. If you use the recovery disk to store files (such as backup files), the reader is full quickly and can cause serious problems when you need to use the system recovery.
  Note: Do not store files on the recovery drive. The only files on the recovery disk should be linked to a system recovery.

  Here's a post that addresses a similar issue. To resolve this issue, check the suggestion given in the post.

  Message "you run lack of disk space on RECOVERY (d :))".

• Qosmio F50 - the hard drive recovery?

  Hello

  I had a very big problem.
  I've made a few changes with my Vista regs and then I was unable to start again.
  So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

  Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
  Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

  Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

  Model: Qosmio F50

  Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

  Thanks in advance because I'm really despair

  Hello

  > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
  I'm a bit confused of m.
  How do recover you the laptop?
  Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

  Usually, it is a procedure how to start the Toshiba HDD recovery.

  I guess you didn't create a recovery Toshiba drive in the past is good?
  It was a big mistake buddy because the recovery disk would help you in difficult situations

  Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
  You can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• How can I reinstall Photoshop CS5 after the hard drive on my iMac replaced?

  How to reinstall or download Photoshop CS5 after the hard drive on my iMac replaced?

  Hi hawkejo1,

  Please install Photoshop CS 5 from the following link: Download CS5 products

  And it to authenticate with the serial number.

  Kind regards

  Tanuj

• After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

  After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

  You actually have a renewal LR5 problem or ask yourself what you need to do?

  Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

  Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

• remove all the HARD drive recovery partition incl. disk partitions

  IM in the process of upgrading to vista 32-bit Ultimate edition - a Lenovo T61 laptop OS original vista home, comes with HARD 160 GB but only show 110 GB disk.
  There is the hidden for drive recovery partition. now, I've wanted this disk recovery partition removed for more space for important files of video editing.

  How can I remove this parition hidden containing the recovery disk?

  I bought the support for laptop recovery CD - I have no need of the hidden partition.

  in the process, I deleted the existing partition (not the hiiden recovery partition) and installed vista ultimate 32 and it lights without problem. I then installed
  the INF chipset utilitty downloaded from the Lenovo Web site, and then installed some drivers downloaded - and all in perfect condition smooth running.

  now, I decided to remove that hidden partition containing the disk recovery - whatever happens after that, I have the recovery CD.

  How to remove this hidden partition? TIA

  http://www.mydigitallife.info/2008/02/29/delete-and-remove-to-unlock-EISA-hidden-recovery-or-diagnostic-partition-in-Vista/

  The link above is General info re remove hidden restore partitions.

  "In some OEM system, such as IBM/Lenovo, is impossible to remove from Windows."

  This link below might be more to the point for you:

  http://Forum.NotebookReview.com/showthread.php?p=2367169

  Written by:

  hypertrophy
  Computer notebook evangelist

  Join Date: March 2007

  Messages: 437

  Reputation power: 7

  "" "This applies only to Windows Vista.

  * Make sure that you have backed up your OEM code before deleting the Rugged hidden

  The hidden restore Partition Lenovo is a protected partition, then you will not be able to remove it through disk management as you would with any other normal partition. You can use Diskpart. You can still use these steps to remove the hidden restore partition if you have already done a clean install, but you will need a 3rd party software to combine with the main partition. It is better if you remove the first hidden restore Partition, then cross with a clean install using one of the many guides available on this forum.

  Step 1.
  Burn recovery media. Type "Recovery media" (without the quotes) in the search in the Start Menu. Open the application and follow the instructions.

  Step 2.
  Open the application by typing Diskpart either 'Diskpart' (without the quotes) in the search, or type "Diskpart.exe" in run by pressing Windows key + R.

  Step 3.
  Now with open Diskpart, you must enter the following command lines:

  I. type "list disk" without the quotes and press ENTER.

  II. Type in "select disk 0" and press ENTER.

  III. then type in "list partition" and press ENTER.

  IV. then type in 'select partition x' x = the recovery partition you want to delete (I think it's 1, I do not remember) replace x with the number of recovery partition and press to enter.

  V. finally type in "delete partition override" and press ENTER.

  That should do the trick. Good luck!

  __________________
  T61 15.4 "

  Specific ThinkPad Vista 32/64 bit Clean Install Guide side.

  
  Delete Hidden Partition Lenovo's of recovery on Vista using Diskpart Guide.
  Of orev Vista Clean install and RAM Memtest module test Guides.
  The Lenovo wallpapers 1680 x 1050factory-installed.

  WARNING:
  Grain of salt applies in my view.

  See you soon. Mick Murphy - Microsoft partner

• If I run the hard drive recovery system I'll lose my hot mail and norton 360

  If I run my hard drive recovery system I'll lose my hot mailand norton 360

  Hello

  ·         Are you referring to restoring the system or restore to factory setting?

  I suggest you visit the link provided below for more information on system recovery option in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  If you are recovering system of built-in hard drive, then you may lose all data on the system but you will not lose the hotmail account as it is stored on the server.

  If you are referring to the system restore option then you will lose all data in the system, but you may lose the application that you installed after the date to which you restored the system

  For more information about system restore, see the below given link

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  In case you're talking about restoring factory setting then you will lose all data on the system and your system would be restored to factory settings.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• The upgrade from Windows XP to Windows 7 Pro after the hard drive took a dive.

  Hello, I have an old Dell Inspiron E1505, I bought in 2006, which I have upgraded from Windows XP to Windows 7 Pro last an online purchase that came with a product key of designertechsoftware.com in April of 2014. Months later, the hard drive has so I replace w / a 60 GB one and replaced the RAM w / 2-1 GB cards. I don't have a disc of Windows 7 Pro but I got it work using the old XP dics, originally, it came with. Can I use this disc to enter the product key code that I got online for Windows 7? I see there is an upgrade option that comes up when I run the XP disk once it's been installed on my laptop. Thanks in advance for your help in my question. Not sure if it has been already answered the previous question.

  Your best option is to ask a backup copy or to borrow the corresponding edition, you have a license from a friend. Ensure that it is a upgrade disk or any retail version is authentic.

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

• Satellite A100-451 - a few questions on the HARD drive, speakers

  I hope someone can help with these that I could not help on the information line.

  How fast is the hard drive on this laptop? He said SMART 160 GB, but does not specify a speed, although I'm guessing its 5400 RPM.

  Are the Harmon Kardon speakers? The specs say Toshiba stereo, and even on the Comet, he said Harmon Kardon. Here is a good bass-wise?
  Looks like there is no bluetooth, I find a little surprise.

  Finally, the only place wherever I can find it for sale is the comet... I was wondering it anyone has also saw that I had some dodgy experiences with them.

  See you soon
  Matt

  Hello

  I found some info that the rotation of the HARD drive is 4200 RPM. I'm not sure 100% on speakers but usually if laptop a harman/kardon speakers it is not in the specification but for A100-451, it is not the case. This info, you can get the garage directly.

  BT is not available, and it shouldn't surprise you because most of the A100 models are supplied without BT module. You can use any time key USB BT. IT is simple to use and really cheap.

• Unable to see the number of files on the hard disk on Windows 7 computer after the hard drive crashed windows xp system

  Original title: unable to see many folders on separate conputer

  I was using windows xp with service pack 3 and windows 7 on a separate booklets. Suddenly the laptop with XP crashed... The hard drive was Ok - cased with a USB port, but now on the connection with the computer laptop windows7 I saw no many records there - pls help

  the system crashed in fact as I was reading the (visualization of the pictures - JPEG, bmp and also some books .pdf) & suddenly.  In the Xp laptop NVIDIA graphics card was there.  He lacked RECENT documents, I see

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  You can make the disk check to make sure that the hard disk is not damaged.

  See the link below for more information on disk error checking in Windows XP.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 2:

  This issue could also be linked to the virus/malware on the hard drive that may have caused the crash of the system.

  Click on the link below to download and run a full scan of the system using the Microsoft Safety Scanner.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Satellite A100-237, which is the HARD drive more big, I can install?

  Hello!
  Can you guys help me. I have the Satellite A100-237
  I would like to buy a new HARD drive (250 GB or 320).
  What is the largest HARD drive can I install in this laptop? I couldn't find any info about it.
  Thanks for your help.

  Hello

  The point is that there are no details or info on HARD drive sizes compatible max.
  If we can only speculate.
  Is the laptop seems to support SATA hard drives and in my opinion one 250 GB or more should work.
  But this is only a personal opinion, and it would be very interesting to know if a HDD 320 would work too.

  Please post some comments after you have upgraded the HARD drive.

  See you soon

• After the procedure of recovery finished, but can not get excel or word documents.

  Just completed a recovery of the system recovery disks and copied the files of backup data on the hard drive.  He created a shortcut to a system recovery, but I cannot or do not know how to recover excel or word documents.  Is it possible to recover?  I have a backup diskfor than some files I created in November of excel, but it does include all the documents.

  Hi white,.

  If I understand correctly, you can browse the documents located on the old user account.  If this is true, try to copy the files for the user account wished.   If so, take a look at this document if you have problems with the permissions of the folder.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to reinstall lightroom 5 after a hard drive format. I do not have a disk.

  I need to reinstall lightroom 5 after a hard drive format. I have do doesn't have a Disc.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh